Tag: lamp enclosure

When to replace the ASK LAMP-001 projector lamp

The ASK LAMP-001 projector lamp will run for approximately 1500 -2000 hours before needing to be replaced.   It’s critical to buy and install a genuine ASK LAMP-001 rather than a generic lamps. Although lower in price initially, these copy cat

Tagged with: , , , , , , , , , , , , , , , , ,

Replace your Sanyo PLC-SL20 in 3 easy steps

Follow our easy 3-step guide to a new Sanyo PLC-SL20 projector lamp. Signs you need to replace the Sanyo POA-LMP65 (service parts no 610 307 7925) in the Sanyo PLC-SL20 projector: 1. The Replace Lamp Indicator on the top of the projector is

Tagged with: , , , , , , , , , , ,

Your quick guide to a new Sanyo PLC-XU40 projector lamp

Your projector lamp has between 1,000 to 3,000 hours and when it has reached end of life the Lamp Replacement Indicator on the Sanyo XU-40 will blink yellow. When you see this yellow light this it’s time to replace the

Tagged with: , , , , ,

When to replace your Sanyo PLC-XP18 projector lamp

Learn how to replace the Sanyo PLC XP18 projector lamp Learn how to replace the projector lamp in your Sanyo PLC-XP18 projector using this quick step-by-step guide. When you see an orange light blinking on your Sanyo PLC-XP18 projector it’s time

Tagged with: , , , , , , ,

Change the lamp in your Sanyo PLC-XW15 projector

Avoid the nightmare scenario of having your projector not work for the important presentation by knowing when it’s time to replace the lamp in your Sanyo PLC-XW15 projector. Watch for the yellow blinking light on the Lamp Replace Indicator on

Tagged with: , , , , , , , , , , , , ,

Change your Sanyo PLC-SU22 projector lamp in 6 easy steps

STEP-BY-STEP INSTRUCTIONS FOR SANYO PLC-SU22 LAMP REPLACEMENT When it’s time to change your lamp on your Sanyo PLC-SU22 projector, you’ll notice the yellow light blinking on the Lamp Indicator found on the top control panel. You’ll need a Sanyo POA-LMP21 (service parts

Tagged with: , , , , , , , , , ,

When to replace Sanyo POA-LMP18

Find which projectors are compatible with the Sanyo POA-LMP18. The life of the Sanyo POA-LMP18 (service parts no 610 279 5417)  lamp runs anywhere from 1,000 to 3,000 hours. It’s life cycle will vary  depending on how often  depending your projector

Tagged with: , , , , , , , , ,

How to replace the Sanyo PLC-XP10 projector lamp

STEP-BY-STEP INSTRUCTIONS FOR SANYO PLC-XP10 LAMP REPLACEMENT If your projector Sanyo PLC-XP10 lamp no longer turns on, it needs to be replaced.  If the picture is dim or looks unnatural the Sanyo POA-LMP17 (service parts no 610 276 3010) is reaching its end

Tagged with: , , , , , , , , ,

Change the lamp in your Sanyo PLC-XU46 projector

STEP-BY-STEP INSTRUCTIONS FOR SANYO POA-LMP56 LAMP REPLACEMENT Wondering when to replacement your projector lamp on your Sanyo PLC-XU46 projector? Your projector lamp has between 1,000 to 3,000 hours and when it has reached end of life the Lamp Replacement light on

Tagged with: , , , , , , ,

How to replace Sony XL-2200 lamp enclosure for your projection TV.

Sony XL-2200 Lamp Enclosure. Step 1.- Before you start doing anything, unplug the TV from the wall outlet. There are a few thousand volts going through your ballast, be very careful! It’s also a good idea to let the TV

Tagged with: , , ,
Top