DLP Lamp Guide - LCD and DLP Repair Tips - Fix Your DLP - FixYourDLP.com » lamp enclosure http://www.fixyourdlp.com Your Community For DLP Repair Tips! Sat, 04 Feb 2012 16:33:07 +0000 en hourly 1 http://wordpress.org/?v=3.3.1 How to replace Sony XL-2200 lamp enclosure for your projection TV. http://www.fixyourdlp.com/2009/02/20/how-to-replace-sony-xl-2200-lamp-enclosure-for-your-dlp-tv/ http://www.fixyourdlp.com/2009/02/20/how-to-replace-sony-xl-2200-lamp-enclosure-for-your-dlp-tv/#comments Fri, 20 Feb 2009 23:11:25 +0000 Arturo http://www.fixyourdlp.com/blog/?p=631 Sony XL-2200 Lamp Enclosure.

Step 1.- Before you start doing anything, unplug the TV from the wall outlet. There are a few thousand volts going through your ballast, be very careful! It’s also a good idea ]]> Sony XL-2200 Lamp Enclosure.

Step 1.- Before you start doing anything, unplug the TV from the wall outlet. There are a few thousand volts going through your ballast, be very careful! It’s also a good idea to let the TV cool down for at least 15-20 minutes as the bulb itself can get extremely hot and you can severely burn your hand.

Step 2.- In the front of your TV there is a bottom panel where you can access the lamp enclosure door.
Remove it by uninstalling two screws on each side of the panel with your Flat tip screwdriver.

Step 3.- Now go back to the front and you’ll see a metal security bar across the enclosure.
Use your screwdriver to remove it.

Step 4.- Inside you’ll be able to see a hex toped screw that holds the enclosure in place.
Use a Hex key to release it.

Step 5.- Pull it down and you’ll be able to extract it with ease.

Step 6.- Pop in your new enclosure the same way you took out the old one.
Screw it back in with your hex key.

Place & reinstall the metal bar back again.

Step 7.- Take the bottom panel and place it back in the front of your TV.

]]> http://www.fixyourdlp.com/2009/02/20/how-to-replace-sony-xl-2200-lamp-enclosure-for-your-dlp-tv/feed/ 1 How to replace Samsung lamp enclosure for your DLP TV http://www.fixyourdlp.com/2009/02/17/how-to-replace-samsung-lamp-enclosure-for-your-dlp-tv/ http://www.fixyourdlp.com/2009/02/17/how-to-replace-samsung-lamp-enclosure-for-your-dlp-tv/#comments Wed, 18 Feb 2009 03:49:43 +0000 Arturo http://fixyourdlp.com/blog/?p=612 How to replace Samsung lamp enclosure for your DLP TV. Step 1.- First of all, unplug the TV from the wall outlet. You have a few thousand volts going through your ballast, be very careful! It’s ]]> How to replace Samsung lamp enclosure for your DLP TV.
Step 1.- First of all, unplug the TV from the wall outlet. You have a few thousand volts going through your ballast, be very careful! It’s also a good idea to let the TV cool down for a good 15-20 minutes as the bulb itself can get extremely hot.
Locate the lamp enclosure door; it’s usually at the back of your television.

Back Lamp Door

Step 2.- There are four screws on each corner of the lamp door, remove them using a Philips screw driver.

Step 3.- Take the lamp door out by dismounting it from one side.

Step 4.- inside you’ll find the lamp enclosure.

Step 5.- On the side of the plastic enclosure there is a screw that secures the enclosure, uninstall it with a Philips screwdriver.

Step 6.- Pull it out the old enclosure from your TV and slide in the new one.

Step 7.- Reinstall the screw on the lamp enclosure.

Step 8.- On the bottom left corner there is a blue switch that detects if the lamp door is properly installed, if you try to turn your TV on without it won’t turn on.

Step 9.- Place the lamp door back in its place.

Step 10.- Secure it tightly with the four screws on each corner.

]]> http://www.fixyourdlp.com/2009/02/17/how-to-replace-samsung-lamp-enclosure-for-your-dlp-tv/feed/ 5 How to replace Toshiba lamp enclosure for your DLP TV http://www.fixyourdlp.com/2009/02/04/how-to-replace-toshiba-tbl4-lmp-lamp-enclosure-for-your-dlp-tv/ http://www.fixyourdlp.com/2009/02/04/how-to-replace-toshiba-tbl4-lmp-lamp-enclosure-for-your-dlp-tv/#comments Thu, 05 Feb 2009 03:40:57 +0000 Arturo http://fixyourdlp.com/blog/?p=582 How to replace Toshiba lamp enclosure for your DLP TV

Step 1.- First of all, unplug the TV from the wall outlet. You have a ]]> How to replace Toshiba lamp enclosure for your DLP TV

Step 1.- First of all, unplug the TV from the wall outlet. You have a few thousand volts going through your ballast, be very careful! It’s also a good idea to let the TV cool down for a good 15-20 minutes as the bulb itself can get extremely hot.

Locate the lamp enclosure door; it’s usually at the side of your television (it’s on the right side if you’re looking at the back of the TV).

Toshiba LMP lamp enclosure door

Lamp enclosure door toshiba

Step 2.- There is a hexagonal screw that secures the door to the lamp enclosure.

To remove it you need to use a Hex key (also known as Allen key).

Toshiba lamp enclosure door

Toshiba Lamp enclosure door

Once the door is loose you can easily take it out.

Toshiba lamp enclosure door

Step 3.- Inside you’ll be able to find the lamp enclosure with the lamp, to take it out you first have to loosen the two screws on the bottom of the enclosure with a standard Philips screwdriver.

Toshiba lamp enclosure door

Step 4.- Pull out the enclosure from inside your TV.

Toshiba lamp enclosure door

Step 5.- Take your new enclosure and insert it inside.

Toshiba lamp enclosure door

Secure the new enclosure by tightening the two screws at the bottom.

Toshiba lamp enclosure door

Step 6.- Reinstall the lamp enclosure door with the Hex key and congratulation, you are done!

Toshiba lamp enclosure door

Toshiba lamp enclosure door

To replace the lamp from your enclosure we have a step by step guide of the TBL4-LMP model to help you at http://guides.fixyourdlp.com/toshiba/TBL4-LMP.php?Click=1683
If you would like to purchase the lamp enclosure for any Toshiba TV we recommend you visit http://www.discount-merchant.com/default.asp?Click=1683 and type in your part number, they offer a wide selection of top quality products.

]]> http://www.fixyourdlp.com/2009/02/04/how-to-replace-toshiba-tbl4-lmp-lamp-enclosure-for-your-dlp-tv/feed/ 4