The life of the Sanyo POA-LMP18 (service parts no 610 279 5417)  lamp runs anywhere from 1,000 to 3,000 hours. It’s life cycle will vary  depending on how often  depending your projector is use and whether there is regular maintenance of the filters.

The life expectancy of your Sanyo POA-LMP18 (service parts no 610 279 5417) lamp depends on the amount of usage and whether the air filters are cleaned on a regular basis. A build up of dust on the filters will reduce the cooling fans effectiveness and may cause the lamp to overheat. It’s always a good idea to keep a spare lamp on hand so you can replace the lamp immediately and not wait to use the projector.

Only genuine Sanyo POA-LMP18 (service parts no 610 279 5417) lamps should be used when replacing the projector lamp order to keep your projector is good working order. The authentic POA-LMP18 has been manufactured to meet the specifications of the Sanyo projectors.

While knock-off lamps may seem like a bargain due to their low prices, these counterfeit lamps  can damage the sensitive and expensive mechanisms and expensive mechanisms in your Sanyo  projector and may also void your guarantee from the manufacturer. Purchasing a genuine  Sanyo POA-LMP18 will ensure you keep your projector in good working order.

The Sanyo POA-LMP18 can be used in the following projectors:

• Sanyo PLC-SP20N
• Sanyo PLC-XP07B

For step-by-step instructions on how to replace the Sanyo POA-LMP18 (service parts no 610 279 5417) projector lamp, please click on your specific model listed below:

Sanyo PLC-SP20N Projector

Click here for step-by-step instructions on how to change the Sanyo POA-LMP18 (service parts no 610 279 5417) projector lamp for the Sanyo PLC-SP20N projector.

Sanyo PLC-XP07B Projector

Click here for step-by-step instructions on how to change the Sanyo POA-LMP18 (service parts no 610 279 5417) projector lamp for the Sanyo PLC-XP07B projector.

Looking for a less expensive option? Want more information? Watch our step-by-step video on replacing only the Sanyo POA-LMP18 (service parts no 610 279 5417) bulb instead of the entire lamp housing.

The post When to replace Sanyo POA-LMP18 appeared first on DLP Lamp Guide - LCD and DLP Repair Tips - Fix Your DLP - FixYourDLP.com.