There is between 1,000 to 3,000 hours of life with Sanyo POA-LMP35 (service part no 610 293 2751) if you’ve installed an authentic projector lamp.  The exact amount of time will vary depending on how much your projector is used and how regularly the air filters are cleaned. (Clogged air filters cause the projector to heat up and this puts stress on the lamp.)

You won’t get as many hours if you’ve installed a knock-offs lamp since they have much shorter life spans due to their inferior workmanship and materials. Installing a generic projector lamp also voids the warranty on your projector.

Walk away from lamps with a price tag that seems too good to be true. The few dollars you save are not worth, especially if the knock-off explodes inside your computer.

Learn the 7 tips for spotting counterfeits lamps and protect yourself.

Looking for a less expensive option? Are you technically adept?  Watch our step-by-step video on replacing only the Sanyo POA-LMP35 (service part no 610 293 2751) bulb instead of the entire lamp housing.

Projectors compatible with the Sanyo POA-LMP35 (610 293 2751) projector lamp:

• Sanyo PLC-SU30
• Sanyo PLC-SU31
• Sanyo PLC-SU32
• Sanyo PLC-XU30/PLC-XU35
• Sanyo PLC-XU31
• Sanyo PLC-XU32/PLC-XU37
• Sanyo PLC-XU33/PLC-XU38

Scroll down for links to step-by-step instructions on replacing the Sanyo POA-LMP35 (service part no 610 293 2751) lamp for each of these projectors.

When it’s time to replace the Sanyo POA-LMP35 (service part no 610 293 2751)8 your projector’s Lamp Replacement Indicator will turn yellow. Be sure to buy an genuine projector lamp and get a lamp that keeps your projector working properly.

Click here for step-by-step instructions on how to change the Sanyo POA-LMP35 (service part no 610 293 2751 projector bulb for the Sanyo PLC-SU30 projector.

Click here for step-by-step instructions on how to change the Sanyo POA-LMP35 (service part no 610 293 2751 projector bulb for the Sanyo PLC-SU31 projector.

Click here for step-by-step instructions on how to change the Sanyo POA-LMP35 (service part no 610 293 2751 projector bulb for the Sanyo PLC-SU32 projector.

Click here for step-by-step instructions on how to change the Sanyo POA-LMP35 (service part no 610 293 2751 projector bulb for the Sanyo PLC-XU30/PLC-XU35 projector.

Click here for step-by-step instructions on how to change the Sanyo POA-LMP35 (service part no 610 293 2751 projector bulb for the Sanyo PLC-XU31 projector.

Click here for step-by-step instructions on how to change the Sanyo POA-LMP35 (service part no 610 293 2751 projector bulb for the Sanyo PLC-XU32/PLC-XU3 projector.

Click here for step-by-step instructions on how to change the Sanyo POA-LMP35 (service part no 610 293 2751 projector bulb for the Sanyo PLC-XU33/PLC-XU38 projector.

The post Replacing the Sanyo POA-LMP35-610 293 2751projector lamp appeared first on DLP Lamp Guide - LCD and DLP Repair Tips - Fix Your DLP - FixYourDLP.com.

Sanyo PLC-XU33/PLC-XU38 projector

Follow our easy step-by-step guide for haslse-free installation of lamps in your Sanyo PLC-XU33/PLC-XU38 projector.

When the lamp is reaching end of life, the Lamp Replace Indicator will flash yellow. You’ll need to buy a new Sanyo POA-LMP35 (service part no 610 293 2751) projector lamp. (Another indication that you need to replace the Sanyo POA-LMP35 is if the screen is dim or the image color appears unnatural.)

Authentic vs Knockoff

Protect your Sanyo PLC-XU33/PLC-XU38 projector and invest in an authentic projector lamp. The Sanyo POA-LMP35 (service part no 610 293 2751) you purchase from an OEM manufacturer is made with the proper specifications and superior materials. It’s been created to fit and work properly with the sensitive components inside your projector. Knock-off lamps don’t have the same precision and are often made with inferior materials that can damage your projector. These generic lamps are also prone to explosions.

The few dollars you save upfront may end up costing you more in the long run. Avoid hassles and purchase a genuine lamp.

Looking for a less expensive option? Are you technically adept?  Watch our step-by-step video on replacing only the Sanyo POA-LMP35 (service part no 610 293 2751) bulb instead of the entire lamp housing.

Step-by-step installation of the Sanyo POA-LMP35 projector lamp

CAUTION: Follow these safety procedures before replacing the lamp:

• Turn off the projector, unplug the AC cord.
• Allow the Sanyo PLC-XU33/PLC-XU38 projector to thoroughly cool for at least 45 to 60 minutes. These projectors operate under high heat and there is a possibility of being burned.

• The lamp cover for the PLC-XU33/PLC-XU38 is located at the bottom of the projector. Gently turn over the projector onto its side and loosen the screw holding the cover in place. Place the cover to one side.
• Loosen all three screw holding the Sanyo POA-LMP35 (610-293-2751) lamp in place. lamp cage in place. Grab the lamp handle and gently lift the lamp out of its socket. Place to one side. Be sure to dispose of the lamp properly through a local recycling program.
  
• Take the new Sanyo POA-LMP35 (service part no 6102932751) lamp cage by the handle—avoid touching the actual bulb as this can break or damage the lamp. Without forcing the lamp, place it into the slot.
• Once the lamp is in, tighten all three screws on the Sanyo POA-LMP35 Lamp Assembly. Make sure the screws have been tightened properly or the PLC-XU33/PLC-XU38 projector will not turn on.
• Replace the Lamp Cover and tighten the screw. Re-connect the power cord and turn on the PLC-XU33/PLC-XU38 projector.
• Reset the Lamp Replace counter by following the instructions below.

NOTE: Be sure to properly recycle your used Sanyo POA-LMP35 (service part no 610-293-2751) lamps. Since they contain mercury they can’t be placed into regular garbage.

Resetting the Lamp Replace Counter

In order for the projector to properly track the lamp life of your Sanyo POA-LMP35 (service part no 6102932751) you’ll need to reset the Lamp Replace counter on the Sanyo PLC-XU33/PLC-XU38 projector. Failure to do so can result in the Replace Lamp Indicator not tracking the lamp life properly.

• Make sure the Sanyo PLC-XU33/PLC-XU38 projector is turned  on.
• Press the MENU button to access the ON-SCREEN MENU.
• Press the POINT LEFT/RIGHT button to select the SETTING menu.
• Press the SELECT button to open the SETTING MENU option.
• Press the POINT DOWN button so the red-arrow appears.
• Move down to the LAMP AGE option. Press SELECT to open the next option.
• The message “Lamp replace counter Reset?” will be displayed.
• Click on the option YES to reset the timer.
• RESET the Lamp replace counter ONLY WHEN the lamp has been REPLACED.

Get your Sanyo POA-LMP35 lamp to last longer

• Wait at least five minutes before turning the Sanyo PLC-XU33/PLC-XU38 projector off.
• Don’t operate the projector continuously without letting it stand for at least one hour turned off every 24 hours.
• Cleaning the air filter regularly will also prolong the life of the Sanyo POA-LMP35 (service part no 610 293 2751) and prevent the Sanyo PLC-XU33/PLC-XU38 from overheating.

The post The quick guide for installing the Sanyo PLC-XU33/PLC-XU38 projector lamp appeared first on DLP Lamp Guide - LCD and DLP Repair Tips - Fix Your DLP - FixYourDLP.com.

When you notice a yellow blinking light on the top of your Sanyo PLC-XU30/PLC-XU35 projector, it’s time to replace the Sanyo POA-LMP35 (service part no 610 293 2751) projector lamp. Follow our simple step-by-step instructions below for a quick and easy installation of your new projector lamp.

Why buy authentic

Be sure to purchase only Sanyo POA-LMP35 to protect your investment. While knock-off lamps can appear to be a bargain due to their cheaper prices, these counterfeit models can actually end up costing you more in the long run. Knock-offare manufactured with inferior parts that can damage the sensitive mechanisms in your  PLC-XU30/PLC-XU35 projector.

Buying a genuine Sanyo POA-LMP35 gives you a lamp made to meet the specifications of your Sanyo PLC-XU30/PLC-XU35 projector while keeping your warranty intact.

Looking for a less expensive option? Are you technically adept?  Watch our step-by-step video on replacing only the Sanyo POA-LMP35 (service part no 610 293 2751) bulb instead of the entire lamp housing.

Step-by-step instructions for replacing Sanyo POA-LMP35  (6102932751)

• Allow the  PLC-XU30/PLC-XU35 projector to thoroughly cool before changing the lamp. Turn off the projector, unplug the AC cord and allow 45 to 60 minutes for the projector to cool. These projectors operate under high heat and there is a possibility of being burned, if the projector is not fully cooled before changing the Sanyo POA-LMP35 (service part no 610 293 2751) lamp.
• The lamp cover for the  PLC-XU30/PLC-XU35 is at the bottom of the projector. Gently turn projector over and loosen the screw holding the cover in place. Place the cover to one side.
• Inside you’ll find the Sanyo POA-LMP35 (service part no 6102932751) lamp cage. Loosen both screws holding the lamp cage in place. Grab the lamp handle and gently lift the lamp out of its socket. Place to one side. Be sure to dispose of the used lamp through a local recycling program. Don’t throw this lamp into the regular garbage as it contains mercury.

• Taking the new Sanyo POA-LMP35 (service part no 610 293 2751) lamp assembly by the handle place it into the slot. Avoid touching the actual bulb as the oil from your fingers can burn a black spot on the lenses or you can accidentally break the bulb. Don’t force the lamp into place — it should slide into the slot easily.
• Once the lamp is in, tighten both screws on the Sanyo POA-LMP35 (service part no 610293 2751) lamp assembly. Make sure the screws have been tightened properly or the  PLC-XU30/PLC-XU35 projector will not turn on.
• Replace the Lamp Cover and tighten the screw. Re-connect the power cord and turn on the  PLC-XU30/PLC-XU35 projector. If the Sanyo POA-LMP33 lamp does not turn on after the warm-up period, try re-installing the lamp.
• Reset the Lamp Replace Counter by following the instructions below.

NOTE: Your old  Sanyo POA-LMP35 (service part no 6102932751) lamp should be properly recycled. These lamps contain mercury and can’t be placed into common garbage.

Reset the Sanyo PLC-XU30/PLC-XU35 Lamp Replace Counter

The Lamp Replace Counter for the  Sanyo PLC-XU30/PLC-XU35 will track the correct age of your newly installed lamp and trigger the Lamp Replace Indicator. Failure to reset the counter may result in the projector not tracking the end of life for the  Sanyo POA-LMP35 (6102932751) and letting the projector inadvertently use the lamp past its normal life cycle. Your  Sanyo PLC-XU30/PLC-XU35 may stop working suddenly if the Lamp Replace Counter has not been properly set.

• Press the MENU Button to display the MAIN MENU. Press the POINT LEFT/RIGHT button and scroll right to select SETTING.
• Press the SELECT button to display the SETTING DISPLAY menu.
• Press the POINT DOWN button (a red arrow will appear).
• Move the red arrow to the LAMP AGE and then press the SELECT button.
• The message “Lamp replace counter reset?”  appears. Move the arrow down to YES and press the SELECT button.
• Move the arrow to QUIT and press the SELECT button.

3 tips for extending the life of the Sanyo POA-LMP35 projector lamp

Extend the life of your newly installed  Sanyo POA-LMP35 (service part no 610 293 2751) by following these helpful tips:

• Wait at least five minutes before turning the Sanyo  PLC-XU30/PLC-XU35 projector off.
• Don’t operate the projector continuously without letting it stand for at least one hour turned off every 24 hours.
• Cleaning the air filter regularly will also prolong the life of the Sanyo POA-LMP35 (service part no 6102932751) and prevent the  PLC-XU30/PLC-XU35 projector from overheating.

The post How to replace the Sanyo PLC-XU30/PLC-XU35 projector lamp appeared first on DLP Lamp Guide - LCD and DLP Repair Tips - Fix Your DLP - FixYourDLP.com.