Which LED Light
|
Symptom
|
Possible Cause(s)
|
Possible Cure
|
Power LED |
Not blinking
No picture
or sound
|
Television is off or Possible a bad
power supply or micron board |
Unplug for 5 minutes.
Plug back in and try again.
Call your lamp retailer for a referral to an authorized Sony service center if it still fails to turn on. |
Power LED |
2 blinks
No picture or sound |
Temperature problem |
Make sure fan exhaust is not blocked.
Check for dust build up. Still not working?
Requires Service. Call Authorized
Service Center
|
Power LED |
3 blinks
No picture or sound
|
Lamp cove or door, or lamp unit not secure
|
Make sure lamp door is secure.
If it still doesn't solve the issue, call your lamp retailer for further technical support.
|
Power LED |
4 blinks
No picture or sound
|
Fans have lost power.
Suspect AGU or A board depending
on model. This could also be a
temperature related issue. |
Make sure fan exhaust is not blocked.
Check for dust build up and clean filters.
Still not working? Call your lamp retailer for a referral to an authorized Sony service center.
|
Power LED |
5 blinks
No picture or sound
|
Lamp driver (ballast) may be bad.
|
Replace the lamp first. If the lamp doesn't ignite, may be ballast.
Call your lamp retailer for a referral to an authorized Sony service center. |
Power LED |
6 blinks
No picture or sound
|
Over voltage protection occured.
|
Requires Service.
Call your lamp retailer for a referral to an authorized Sony service center.
|
Power LED |
7 blinks
No picture or sound
|
Audio problems. |
Requires Service.
Call your lamp retailer for a referral to an authorized Sony service center.
|
Power LED |
8 blinks
No picture or sound
|
G3
A or B board may have
failed due to power surge.
|
Requires Service.
Call your lamp retailer for a referral to an authorized Sony service center.
|
Power LED |
10 blinks
No picture or sound
|
Over voltage or power surge |
Requires Service.
Call your lamp retailer for a referral to an authorized Sony service center.
|
Lamp LED |
Light is ON
or Flashing
No picture or sound
|
Lamp may be bad
|
Replace the lamp. If you have already replaced the lamp, call your lamp retailer for technical support. |