Comments on: Replace your Sanyo PLV-75 projector lamp https://www.fixyourdlp.com/2012/03/28/replace-your-sanyo-plv-75-projector-lamp/ Your Community For DLP Projector Repair Tips! Fri, 22 Jan 2016 05:22:15 +0000 hourly 1 https://wordpress.org/?v=7.1.4 By: Shelagh McNally https://www.fixyourdlp.com/2012/03/28/replace-your-sanyo-plv-75-projector-lamp/#comment-85490 Thu, 28 May 2015 23:11:57 +0000 http://www.fixyourdlp.com/?p=3230#comment-85490 In reply to Won.

Hi Won,
You must reset the counter when you change the lamp. Otherwise, the projector assumes that old lamp is still in use and keeps counting the old hours. Your projector doesn’t realize it’s a new lamp with many more hours. Hope this helps.
Cheers,
Shelagh

]]> By: Won https://www.fixyourdlp.com/2012/03/28/replace-your-sanyo-plv-75-projector-lamp/#comment-85477 Thu, 28 May 2015 04:11:26 +0000 http://www.fixyourdlp.com/?p=3230#comment-85477 I replaced a bulb several months ago and it has worked well, but the projector won’t turn on now. No LED is turned on even if power cable is OK. I don’t remember exactly if I reset the counter or not. Is this because I didn’t reset the counter and it expired? Then how can I reset the counter when it won’t turn on? Otherwise, does it simply indicate that the replaced bulb is off again?

]]>