About Us - Page 116 of 171 - DLP Lamp Guide - LCD and DLP Repair Tips - Fix Your DLP

7 Tips for extending RPTV projector lamp life

Shelagh McNallyPosted on July 11, 2012 Posted in FixYourDLP, Projector Lamp Replacement Guides — No Comments ↓

Extend the life of your RPTV projector lamp with these maintenance tips

You don’t have to spend money and keep replacing the RPTV projector lamp. Follow these tips and make your lamp last longer.

Turn off the TV. When you’ve finished watching your shows, turn off the your RPTV. Leaving it on for background noise just reduces lamp life as well as adding to your electricity bill.
Attach a UPS battery. Your RPTV needs two minutes of cool down time with the fan running before it shuts down completely. Avoid plugging it into a cable box, satellite receiver or shared AC Surge Suppressor. Should the electricity suddenly shut or there be a spike in electricity (usually from something being plugged into the surge suppressor) the additional blast of electricity can cause the lamp to blow because it hasn’t had sufficient time to cool off.
Let it flow. Make sure your RPTV is in the best location and there is a small gap between the wall and actual TV to allow air to flow. Overheating will reduced the life of your machine as well as your lamp.
Keep it clean. Clean your air filters every month. If you have pets then you may have to clean them more often. The air filter are an important component for keeping your RPTV from overheating.
Cool it. Extremely warm or humid temperatures are also hard on your RPTV. Keep the room cooler and use a humidifier to keep the air dry.
Reduce the lamp brightness. Your RPTV comes with the factory-setting of maximum brightness. You don’t need the brightest setting so choose the medium to low settings, sometimes called the ECONO or ECO setting. This is automatically extend the lamp life.
Buy authentic replacement lamps. When it comes time to replace the lamp in your RPTV, be sure to go with a recognized dealer selling authentic RPTV lamps. Generic “compatible” lamps are sold at a cheaper prices but don’t last as long, are prone to exploding and are not properly calibrated to work with the sophisticated components in your RPTV. Avoid generics and go with authentic projector lamps.

Tagged with: extending RPTV lamp life, RPTV maintenance, RPTV projector lamp., RPTV replacement lamps

Replacing the ASK Proxima C300HB projector lamp in 3 easy steps

Shelagh McNallyPosted on July 10, 2012 Posted in FixYourDLP, Projector Lamp Replacement Guides — No Comments ↓

ASK Proxima C300HB projector

How to replace the ASK Proxima C300HB projector lamp

The ASK Proxima C300HB projector lamp has approximately 1,500 hours depending on usage and maintenance. When the SK Proxima C300HB projector lamp reaches end of life the Alarm LED on the projector will light red. Replace the lamp immediately.

To find out how much time is left on the lamp you can also check the ABOUT screen found on the MAIN Menu. It will list the number of hours used.

Follow our 3-step guide for help in replacing the ASK Proxima SP-LAMP-008

STEP 1: Finding the right projector lamp

There are so many choices on the Internet for a ASK Proxima SP-LAMP-008 projector lampthat finding the correct lamp can be overwhelming. Go with authentic OEM lamps and ignore the sites offering generic “compatible” projector lamps even though the prices seems to be a bargain.

This generic lamps are made with counterfeit materials and are prone to explosions, offer poor picture quality and actually have a shorter lamp life than authentic projector lamps. Installing generic lamps into your ASK Proxima C300HB projector will void the warranty leaving you unprotected should any of the sensitive components inside be damaged due to the inferior workings of these lamps. More importantly, these “compatible” lamps are often made with toxic materials such as the carcinogenic Krypton-85.

Protect your investment and your health. Reduce hassles and problems. Buy an authentic ASK Proxima SP-LAMP-008 projector lamp.

Buy this lamp on Amazon from the following authorized dealers:

STEP 2: Installing the ASK Proxima SP-LAMP-008 projector lamp

1. The lamp cover will be found at the back of the ASK Proxima C300HB projector. Loosen the two screws holding the ASK Proxima SP-LAMP-008 projector lamp cover in place. Remove and place to one side.
2. Loosen the two screws holding the ASK Proxima SP-LAMP-008 projector Lamp Assembly in place.
3. Grab onto the ASK Proxima SP-LAMP-008 projector lamp handle and pull the lamp from the projector. Place to one side. Be sure to dispose of the used lamp through a local recycling program. Don’t throw this lamp into the regular garbage as it contains mercury.

The ASK Proxima SP-LAMP-008 projector lamp contains mercury and should not be thrown into regular garbage. Recycle your used lamps!

4. Place the new ASK Proxima SP-LAMP-008 projector lamp into the socket being careful not to touch the bare lamp (this can form black spots on the bulb that will ruin the projected image).
5. Tighten the two screws holding the ASK Proxima SP-LAMP-008 Lamp Assembly in place.
6. Put the ASK Proxima C300HB cover back in place and tighten the two screws.
7. Put the power cord back into the projector and turn it on. You are now ready to Reset the Lamp Replace Counter.

STEP 3: Resetting the projector lamp timer

It’s important to reset the projector lamp timer of the ASK Proxima C300HB in order to properly track lamp life. Failure to reset the timer may result in the projector not knowing when the lamp is finished and shutting down suddenly.

To reset the projector lamp timer:

Open the MAIN menu.
Scroll down to SETUP menu. Press SELECT button.
Scroll down to SERVICE. Press SELECT button.
Scroll down to RESET LAMP TIMER. Press SELECT button.
The LAMP CHANGE icon will appear on screen. Press SELECT to reset the timer.

Tagged with: ASK Proxima C300HB projector, ASK Proxima projector lamps, ASK Proxima SP-LAMP-008, genuine projector lamps, replacement projector lamps

When to replace the ASK Proxima SP-LAMP-007 lamp

Shelagh McNallyPosted on July 9, 2012 Posted in FixYourDLP, Projector Lamp Replacement Guides — No Comments ↓

ASK Proxima SP-Lamp-007

Which projectors are compatible with the ASK Proxima SP-LAMP-007 lamp

The ASK Proxima SP-LAMP-007 lamp will last up to 2000 hours before needing to be replaced. You will notice a “Change Lamp” message on screen when you start up the projector’s and the LED light on the front panel will light up red. Be sure to install a genuine ASK Proxima SP-LAMP-007 lamp from a recognized OEM manufacturer. Installing a generic lamp also voids your warranty for your ASK Proxima projectors.

Generic or “compatible” lamps can damage the sensitive (and expensive) mechanisms in your projector. Due to their substandard materials and poor workmanshup, these counterfeit lamps give off poor illumination and are prone to explosions. Counterfeit lamps may also be filled with toxic substances such as the carcinogenic substance Krypton-85. Learn the 7 Ways to spot a counterfeit lamp and go with an authentic ASK Proxima SP-LAMP-007 lamp.

Buy this lamp on Amazon from the following authorized dealers:

Compatible Projectors

The ASK Proxima SP-LAMP-007 lamp is compatible with the following projectors

ASK C50

ASK Proxima DP-2000s

ASK Proxima DP-2000x

For step-by-step instructions on replacing your ASK Proxima SP-LAMP-007 projector lamp, click on your projector listed below:

ASK C50 projector

Click here for step-by-step instructions on how to change the ASK Proxima SP-LAMP-007 projector lamp for the ASK C50 projector.

Click here for step-by-step instructions on how to change the ASK Proxima SP-LAMP-007 projector lamp for the ASK Proxima DP-2000s projector.

Click here for step-by-step instructions on how to change the ASK Proxima SP-LAMP-007 projector lamp for the ASK Proxima DP-2000x projector.

Green projector

Looking for a less expensive but more environmentally friendly option? Want more information? Watch our step-by-step video on replacing just the ASK Proxima SP-LAMP-007 bulb instead of the entire lamp housing.

Tagged with: ASK C50, ASK Proxima DP-2000X, ASK Proxima projector lamps, ASK Proxima SP-LAMP-007 lamp, authentic projector lamps

Top 10 Tips for projector care

Shelagh McNallyPosted on July 9, 2012 Posted in FixYourDLP, Projector Lamp Replacement Guides — 8 Comments ↓

Follow these simple tips for projector care to extend the life of your projector and projector lamp.

Your projector represents a major investment so want to keep it happy and working for you.

The following projector care tips are easy to follow and will extend the life of your projector lamp as well as your projector.

Let it cool. Don’t shut down your projector too fast but let the fans run for at least two minutes. These machines operate under high temperatures and the fans are designed cool down any super hot elements. Shutting down too quickly your projector’s components.
Chill out. Packing up your projector while it’s still hot may cause lamp filaments and other wires to break. Let the lamp cool down before packing up.
Keep it clean. Your projector’s filters allow airflow throughout the projector and prevent overheating. Clogged air filters means decreased ventilation, which means increased temperatures, which means a possible lamp meltdown or explosion. Dust and dirt also affect the image quality. Check your air filters every few weeks and keep them clear.
Keep it flowing. If your projector has a permanent mounting, make sure the mounting plates don’t block the fan vent and there is enough airflow around the projector to keep it from overheating.
Watch the on/off switch. Don’t be trigger-happy. Turning your projector constantly on and off creates a power surge that will make your projector wear out faster. If you do leave your projector running, make sure that it gets a two-hour rest every 24 hours.
Hands off. Never, ever touch a hot lamp. You can end up with one nasty burn. Never touch a cool lamp bulb either since the oil from your skin leaves a residue on the lamp. Once the lamp heats up the oil residue will burn, creating a black spot on the lamp that shows up on the screen. A large enough oil spot can cause the lamp to shatter.
Watch the lamp life. Be sure the lamp timer has been properly set so the projector will accurately track the lamp life and give you a status update in time for you to replace the projector lamp. You don’t want to be caught off guard with a projector suddenly shutting down because the lamp has run out of time.
Buy genuine OEM lamps. Don’t be cheap. We all like to save money but generic, “compatible” lamps should be avoided because of their inferior materials and workmanship. The few bucks you save can end up costing you much more in the long run when these counterfeit lamps damage your projector and compromise your health. Read 7 tips for spotting counterfeits to learn more.
Go green. Try using the power saver or econo mode on your projector. The only time you’ll really need full brightness is when you are presenting outdoors. Indoor settings, particularly if the room is darker will be fine with the econo mode. You’ll reduce the heat used, lengthen the life of your lamp, reduce wear and tear on the projector and helping the environment.
Read the manual. Ok—so it’s not the most exciting read but at least glance through the manual so you have a working knowledge of your projector. For quick, easy instructions on replacing your lamp projector, check out this website.

Tagged with: care of DLP projectors, prolong your pojectors life, tips for projector care

3 Steps to a new ASK Proxima DP-2000s projector lamp

Shelagh McNallyPosted on July 7, 2012 Posted in FixYourDLP, Projector Lamp Replacement Guides — No Comments ↓

ASK Proxima DP-2000s projector

Installing a replacement ASK Proxima DP-2000s projector lamp

The ASK Proxima DP-2000s projector lamp needs replacing when the LED light is blinking red. Shortly afterwards a “Change Lamp” message appears on screen. You should also check the ABOUT menu and see the lamp hours used is hitting close to 2000 hours–the maximum life span of your ASK Proxima SP-LAMP-007 lamp. It’s time for a new lamp.

STEP 1: Buy the correct lamp

Finding the right lamp for your ASK Proxima DP-2000s projector can be a daunting. The market has been flooded with counterfeit lamps being advertised as “compatible.” They are tempting because of the cheaper price tag but they come with a hidden cost.

These lamps have been created with inferior and often toxic parts, such as the carcinogenic Krypton-85 (known to cause cancer in humans). Their poor workmanship means these generic lamps are also not going to work properly with the sophisticated components in your projector. You run the risk of damaging your projector which will no longer be under warranty once a generic lamp has been installed.

Buy your authentic lamp from an authorized dealer selling the OEM ASK Proxima SP-LAMP-007 lamp. You’ll be getting guarantee on the lamp, technological support but more importantly protecting your health and safety.

Buy this lamp on Amazon from the following authorized dealers:

STEP 2: Installing the new lamp

1. Turn off the ASK Proxima DP-2000s projector and unplug the power cord. NEVER operate the projector with the lamp door removed and this will cause the projector to overheat and the lamp to break. Wait 60 minutes for the ASK Proxima DP-2000s projector to cool thoroughly. The projector operates at a high temperature and there is a danger of burning if the projector is not cool enough.

2. Turn the ASK Proxima DP-2000s projector upside down. Remove the lamp cover by pressing the tab forward towards the lens.

3. Loosen the three screws holding the ASK Proxima SP-LAMP-007 lamp in place.

4. Grab the ASK Proxima SP-LAMP-007 lamp by the two indents and carefully lift it out of the projector. Place it to one side.

NOTE: Be sure to properly recycle your used ASK Proxima SP-LAMP-007 lamps. These lamps contain mercury so can’t be placed into regular garbage

5. Tighten the three screws on the newly installed ASK Proxima SP-LAMP-007.
6. Slide the lamp cover back into the tabs. Plug the power cord in and press the POWER button to turn the ASK Proxima DP-2000s projector back on. You are now ready to Lamp Timer.

Step 3: Resetting the Lamp Timer

Now you’ve installed a new ASK Proxima SP-LAMP-007 you’ll need to reset the LAMP TIMER so the ASK Proxima DP-2000s projector can accurately track the lamp life. To reset the Lamp Timer:

Press the MENU button on the remote or keypad.
Use the ARROW button to scroll down to the SETTINGS menu. Press SELECT button.

Scroll down to the SERVICE option.Press the SELECT button.
Scroll down to the RESET LAMP option. Press the SELECT button.

The lamp hour will be reset to zero and track the lamp life.

Green your projector

Tagged with: ASK Proxima DP-2000s projector, ASK Proxima projector lamps, authentic lamps, genuine lamps

How to replace the ASK C50 projector lamp

Shelagh McNallyPosted on July 5, 2012 Posted in FixYourDLP, Projector Lamp Replacement Guides — No Comments ↓

ASK C50 projector

Install a new ASK C50 projector lamp

Iit’s time to change the ASK C50 projector lamp LED light is blinking red. You may also notice a “Change Lamp” message on screen when you start up the ASK C50 projector.

The maximum time for the ASK Proxima SP-LAMP-007 lamp is 2,000 hours and when it reaches this limit the projector will shut off. Track the amount of time left by using the ABOUT menu option found on the MAIN menu.

Choose a genuine lamp

The first step towards changing your ASK C50 projector lamp is to go with an original lamp from an OEM manufactutuer. Generic compatible lamps are advertised as great bargains but in fact cost more in the long run when you factor in the shorter lamp life and various problems. Copycat manufacturers have neither the technology or the correct parts to create an ASK Proxima SP-LAMP-007 lamp that will work properly with your ASK C50 projector.

Knock-off lamps susceptible to explosions and can damage the precise components in your ASK Proxima DP-6500X projector. Installing a knock-off generic lamp also voids your warranty. An additional worry are the toxic chemicals used by copy-cat manufacturers such as carcinogenic Krypton-85 to duplicate the designs they are stealing. There are a lot of generic lamps posing as real so protect yourself and learn the 7 tips for spotting counterfeits.

Buy this lamp on Amazon from the following authorized dealers:

Replacing the lamp

1. Turn off the ASK C50 and unplug the power cord. NEVER operate the projector with the lamp door removed and this will cause the projector to overheat and the lamp to break. Wait 60 minutes for the ASK C50 to cool thoroughly. The projector operates at a high temperature and there is a danger of burning if the projector is not cool enough.

2. Turn the C50 projector upside down. Remove the lamp cover by pressing the tab forward towards the lens.

3. Loosen the three screws holding the ASK Proxima SP-LAMP-007 lamp in place.

4. Grab the ASK Proxima SP-LAMP-007 lamp by the two indents and carefully lift it out of the projector. Place it to one side.

NOTE: Be sure to properly recycle your used ASK Proxima SP-LAMP-007 lamps. These lamps contain mercury so can’t be placed into regular garbage.

5. Tighten the three screws on the newly installed ASK Proxima SP-LAMP-007.
6. Slide the lamp cover back into the tabs. Plug the power cord in and press the POWER button to turn the projector back on. You are now ready to Lamp Timer.

Step 3: Resetting the Lamp Timer

Now you’ve installed a new ASK Proxima SP-LAMP-007 you’ll need to reset the LAMP TIMER so the ASK C50 projector can accurately track the lamp life. To reset the Lamp Timer:

Press the MENU button on the remote or keypad.
Use the ARROW button to scroll down to the SETTINGS menu. Press SELECT button.

Scroll down to the SERVICE option.Press the SELECT button.
Scroll down to the RESET LAMP option. Press the SELECT button.

The lamp hour will be reset to zero and track the lamp life.

Green your projector

Tagged with: ASK C50 projector, ASK Projector Lamps, authentic lamp

When to replace the ASK Proxima SP-LAMP-006

Shelagh McNallyPosted on July 5, 2012 Posted in FixYourDLP, Projector Lamp Replacement Guides — No Comments ↓

Projectors compatible with ASK Proxima SP-LAMP-006

The ASK Proxima SP-LAMP-006 has a lamp life of 2,000 hours. When it’s time to replace the ASK Proxima SP-LAMP-006 lamp, the LED button on your projector’s panel will blink red. To check lamp life go to the ABOUT menu found on the MAIN projector menu. Don’t be caught short!

Have your replacement ASK Proxima SP-LAMP-006 bought and ready for use before the current lamp reaches its end of life.

Go with genuine

ASK Proxima SP-LAMP-006It’s important to install a genuine ASK Proxima SP-LAMP-006rather than a generic “compatible” lamp.

Although lower in price, copycat lamps end up costing much more in the long run. Counterfeit generic lamp offer poor illumination and have a shorter lamp life. Made with inferior parts and poor workmanship, knock-off lamps often bypass safety features including the properly fitted parts. As a result these lamps are prone to explosionand can also damage the sensitive electronics inside your projector.

Copycat manufacturers are also not following safety protocols and install parts offering no protection to your eyesight from UV rays. In order to create the same results as genuine lamps, these generic manufacturers are also using highly toxic chemicals such as the carcinogenic Krypton-85. Exposure can compromise your helath.

Why risk your health, void your warranty and possible ruin your projector to save a few dollars? Save yourself the hassle. OEM lamp resellers offer technical support as well as a guarantee Learn more about spotting dangerous projector lamps by reading our article: 7 tips for spotting counterfeits.

Buy this lamp on Amazon from the following authorized dealers:

Compatible Projectors

The ASK Proxima SP-LAMP-006 is compatible with the following projectors:

For step-by-step instructions on replacing your ASK Proxima SP-LAMP-006 projector lamp, click on your projector listed below:

Click here for step-by-step instructions on how to change the ASK Proxima SP-LAMP-006 projector lamp for the ASK C200 projector.

ASK Proxima DP-6500X, ASK Proxima SP-LAMP-006

ASK Proxima DP-6500X projector

Click here for step-by-step instructions on how to change the ASK Proxima SP-LAMP-006 projector lamp for the ASK Proxima DP-6500X projector.

Tagged with: ASK C200 projector, ASK Proxima DP-6500X projector, ASK Proxima projector lamps, ASK Proxima SP-LAMP-006, authentic projector lamps

How to replace the ASK C200 projector lamp

Shelagh McNallyPosted on July 4, 2012 Posted in FixYourDLP, Projector Lamp Replacement Guides — No Comments ↓

Installing a new ASK C200 projector lamp

When the ASK C200 projector lamp reached 2,000 hours, the LED light will blink red and the projector will turn off. Replace the ASK C200 projector lamp immediately.

To check the lamp life go into the ABOUT menu found on the MAIN menu page.

Buy authentic!

Invest in an original ASK Proxima SP-LAMP-006 projector lamp and protect your ASK C200 projector from harm. Only authentic lamps can give you the quality and proper components needed for your ASK C200 projector.

Although generic-compatible lamps look like a great bargain since they are sold at discount prices, these knock-off lamps will actually cost you more money. They’ve created with inferior materials and poor workmanship so actually have a shorter life span than 2,000 hours. They are also highly susceptible to explosions and can damage the precise components in your ASK C200 projector. An additional worry are the toxic chemicals used by copy-cat manufacturers to duplicate the technology. Many of these lamps have been manufactured with the carcinogenic Krypton-85.

Why risk your health, void your warranty and possible ruin your ASK C200 projector just to save a few dollars? Save yourself the hassle and go with a genuine ASK Proxima SP-LAMP-006. Learn more about spotting dangerous projector lamps by reading our article: 7 tips for spotting counterfeits.

Buy this lamp on Amazon from the following authorized dealers:

STEP TWO: Installing the new lamp

1. Turn off the ASK C200 projector and unplug the power cord. You don’t want to operate the projector with the lamp door removed and this will cause the projector to overheat.
2. Wait 60 minutes for the ASK PC200 projector to cool thoroughly. The projector operates at a high temperature and there is a danger of burning if the projector is not cool enough.
3. Turn the ASK C200 upside down. Remove the lamp cover by unscrewing the two screws holding the cover in place. Slide the lamp out of its slot.

NOTE: Be sure to properly recycle your used ASK Proxima SP-LAMP-006 lamps. These lamps contain mercury so can’t be placed into regular garbage.

4. Loosen the screw holding the ASK Proxima SP-LAMP-006 lamp in place.
5. To remove the ASK Proxima SP-LAMP-006 lamp, grasp the bail wire handle and gently pull the lamp module out. Be careful not to touch the glass bulb as this may cause it to shatter. Oil from your finger will also leave traces on the bulb and cause black spots when the lamp heats up.
6. Put the new ASK Proxima SP-LAMP-006 lamp into the housing. Be sure the wire handle is down flat.
7. Tighten the top screw on the lamp to secure it in place.
8. Slide the lamp cover back into the tabs. Tighten the two screws on the cover.
9. Plug the power cord in and press the POWER button to turn the projector back on.
10. Reset the lamp hour time.

Step 3: Resetting the Lamp Timer

Now you’ve installed a new ASK Proxima SP-LAMP-006 you’ll want the ASK C200 projector to accurately track the number of hours left in the lamp life. You’ll need to reset the Lamp Timer. There are two ways to reset the Lamp Timer:

Using the menu options:

Press the MENU button on the remote or keypad.
Use the ARROW button to scroll down to the SETTINGS menu. Press SELECT button.

Scroll down to the SERVICE option.Press the SELECT button.
Scroll down to the RESET LAMP option. Press the SELECT button.

The lamp hour will be reset to zero.

Using the projector’s keypad:

Hold down both VOLUME keys simultaneously for 10 seconds. The LED with turn green and the ASK C200 projector will turn on.

Tagged with: ASK C200 projector, Ask Proxima Projectors, ASK Proxima SP-LAMP-006, authentic lamps, genuine projector lamps

3 Steps for replacing the ASK Proxima DP-6500X projector lamp

Shelagh McNallyPosted on July 3, 2012 Posted in FixYourDLP, Projector Lamp Replacement Guides — No Comments ↓

Guide to installing a replacement ASK Proxima DP-6500X projector lamp

When the ASK Proxima DP-6500X projector lamp is reaching end of life you will notice the LED light blinking red. The maximum time for the ASK Proxima DP-6500X projector lamp is 2,000 hours and when it reaches this limit the projector will shut off.

To check the lamp life go into the ABOUT menu found on the MAIN menu page..

Step 1: Buying the correct lamp

Save money and protect your ASK Proxima DP-6500X projector projector by investing in an original ASK Proxima SP-LAMP-006 projector lamp. Although generic-compatible lamps look like a great bargain since they are sold at discount prices, these knock-off lamps will actually cost you more money.

Because they have been created with inferior materials and poor workmanship, they are susceptible to explosions, have a shorter life span and can damage the precise components in your ASK Proxima DP-6500X projector. Installing a knock-off generic lamp also voids your warranty. An additional worry are the toxic chemicals used by copy-cat manufacturers to duplicate the technology. Many of these lamps have been manufactured with the carcinogenic Krypton-85.

Protect the life of your ASK Proxima DP-6500X as well as your own. Go with a genuine ASK Proxima SP-LAMP-006. Learn more about spotting dangerous projector lamps by reading our article: 7 tips for spotting counterfeits.

Buy this lamp on Amazon from the following authorized dealers:

STEP TWO: Installing the new lamp

1. Turn off the ASK Proxima DP-6500X projector and unplug the power cord. You don’t want to operate the projector with the lamp door removed and this will cause the projector to overheat.
2. Wait 60 minutes for the ASK Proxima DP-6500X projector to cool thoroughly. The projector operates at a high temperature and there is a danger of burning if the projector is not cool enough.
3. Turn the ASK Proxima DP-6500X projector upside down. Remove the lamp cover by unscrewing the two screws holding the cover in place. Slide the lamp out of its slot.

NOTE: Be sure to properly recycle your used ASK Proxima SP-LAMP-006 lamps. These lamps contain mercury so can’t be placed into regular garbage.

Step 3: Resetting the Lamp Timer

Now you’ve installed a new ASK Proxima SP-LAMP-006 you’ll want the ASK Proxima DP-6500X projector to accurately track the number of hours left in the lamp life. You’ll need to reset the Lamp Timer. There are two ways to reset the Lamp Timer:

Using the menu options:

Press the MENU button on the remote or keypad.
Use the ARROW button to scroll down to the SETTINGS menu. Press SELECT button.

Scroll down to the SERVICE option.Press the SELECT button.
Scroll down to the RESET LAMP option. Press the SELECT button.

The lamp hour will be reset to zero.

Using the projector’s keypad:

Hold down both VOLUME keys simultaneously for 10 seconds. The LED with turn green and the ASK Proxima DP-6500X projector will turn on.

Tagged with: ASK Proxima DP-6500X projector, ASK Proxima projector lamps, ASK Proxima SP-LAMP-006, authentic lamps, authentic projector lamps

BenQ MP610 projector review

Shelagh McNallyPosted on July 3, 2012 Posted in FixYourDLP, Product Reviews, Projector Lamp Replacement Guides — 1 Comment ↓

Learn more about the BenQ MP610 projector

With its bright 2000 lumens, the BenQ MP610 projector is a multipurpose projector designed primarily for an office setting. It performs well under harsh office lighting with a lamp life of 3,000 hours (more if the economy setting is used).

Retailing at $1000, this projector uses a 0.55″ DLP chip, employing an 800 x 600 resolution to compress higher-resolution inputs for a crisp picture on screen. There’s a 16:9 mode, which digitally re-sizes the picture and uses the golden ratio wheel to increase color depth.

The extremely quiet operating system (25dB) means the presenter won’t have to shout over the machine and its lightweight (6.4lbs) means easy transportation.

The BenQ MP610 can have trouble handling more complicated photos and some may appear washed. It also has a limited range of inputs, with D-sub, S-video and composite the only available options. There are no digital inputs. The projector does tend to run hot and the initial set-up can be difficult. The only maintenance needed is regular cleaning of the lens and lamp replacement.

BenQ MP610is ideal for businesses, education and government offices on a budget.

PROS: BENQ MP610

CONS: BENQ MP610

bright 2000 lumens
operates well under harsh lighting
long lamp life at 3000 hours using regular settings
econo mode gives an additional 1000 hours of lamp life (4000 hours)
uses 800×600 resolution to compress higher-resolution inputs
crisp picture on screen
extremely quiet (25dB)
extremely light 6.4lbs (3.3kg)
easy to transport
no regular maintenance needed except for cleaning lens
lamp installation can be done in under 10 minutes

initial set-up can be complicated
limited color range for more complicated slides
noticeable rainbow effect
limited range of inputs, with only D-sub, S-video and composite
no links for digital
runs hot and needs to be well ventilated
not suitable for entertainment venues
remote is clunky

Replacement lamp and accessories

Need to replace the lamp on your BenQ MP610 projector? Find it on Amazon!
<br>

Looking for a BenQ Universal Projector Ceiling Mount? Find it on Amazon!
<br>

Need lens cleaner for the BenQ MP610 projector? Find it on Amazon!
<br>

For more information

Click here for a step-by-step guide on replacing the BenQ MP610 projector lamp.

Tagged with: BENQ MP610 product review, BENQ MP610 projectyor, product review, reviews