About Us - Page 117 of 171 - DLP Lamp Guide - LCD and DLP Repair Tips - Fix Your DLP

Replacing the ASK Proxima SP-LAMP-001 projector lamp

Shelagh McNallyPosted on July 2, 2012 Posted in FixYourDLP, Projector Lamp Replacement Guides — No Comments ↓

ASK Proxima SP-LAMP-001 projector lamp

Compatible projectors using the ASK Proxima SP-LAMP-001 projector lamp

You can expect between 1500-2000 hours from your ASK Proxima SP-LAMP-001 projector lamp depending on how usagae and maintenance

When it’s time to replace the ASK Proxima SP-LAMP-001 lamp, the ALARM button next to the power control will light up red.

Go with genuine

It’s important to install a genuine ASK Proxima SP-LAMP-003 rather than a generic “compatible” lamp.

Although lower in price initially, these copy cat lamps usually end up costing much more in the long run. Counterfeit generic lamp offer poor illumination that can damage your eyesight as well as a shorter lamp life. Since these lamps are made with poor workmanship and inferior materials they often damage the sensitive components in your projectors. “Compatible” generic lamps are prone to explosion so you also have the risk of being exposed to the carcinogenic substance Krypton-85 used in the making of these lamps.

Go with genuine and get a lamp that keeps your projector working and your warranty good. The OEM resellers offer technical support as well as a guarantee that the ASK Proxima SP-LAMP-001 lamp you are installing will work properly.

Learn the 7 Ways to spot a counterfeit lamp.

Buy this lamp on Amazon from the following authorized dealers:

Compatible Projectors

The ASK Proxima SP-LAMP-001 is compatible with the following projectors

For step-by-step instructions on replacing your ASK Proxima SP-LAMP-001 projector lamp, click on your projector listed below:

ASK C13 projector, ASK Proxima SP-LAMP-001

Click here for step-by-step instructions on how to change the ASK Proxima SP-LAMP-001 projector lamp for the ASK C13 projector.

ASK C300 projector

Click here for step-by-step instructions on how to change the ASK Proxima SP-LAMP-001 projector lamp for the ASK C300 projector.

ASK DP800 projector

Click here for step-by-step instructions on how to change the ASK Proxima SP-LAMP-001 projector lamp for the ASK DP800 projector.

Green your projector

Looking for an even less expensive option? Watch our step-by-step video on replacing only the bare ASK Proxima SP-LAMP-001 instead of the entire lamp housing.

Your quick guide to a new ASK C13 projector lamp

Shelagh McNallyPosted on June 29, 2012 Posted in FixYourDLP, Projector Lamp Replacement Guides — No Comments ↓

Install a replacement ASK C13 projector lamp

Replacing the ASK C13 projector lamp is quick and easy. Follow our guide to a newASK C13 projector lamp

Go with authentic lamps

It’s important to install the correct ASK Proxima SP-LAMP-001 lamp. Educate yourself and learn how to spot a counterfeit lamp. Generic lamps often advertised as “compatible” should be avoided since they are manufactured with inferior parts that can damage the sensitive (and expensive) components in your ASK C13 projector. Knockoff lamps are prone to explosion and have been created using toxic substances such as Krypton-85, which can threaten your health and safety. Using a counterfeit generic lamp will also void any warranty for you have. Spend the few extra dollars for a genuine OEM lamp that guarantees proper components and workmanship to ensure your projector is working at its peak. You’ll also be getting a lamp with a warranty that you’ll be able to return. Most legitimate resellers of these lamps also offer customer service help should you experience any difficulties when installing the ASK Proxima SP-LAMP-001. Go with authentic!

Buy this lamp on Amazon from the following authorized dealers:

Replacing the lamp

Step 1: Turn off the ASK C13 projector and disconnect the power cord. Allow the projector to cool down before replacing the ASK Proxima SP-LAMP-001. These projectors operate at high temperatures and you run the risk of burning yourself if the projector has not cooled. Loosen the screw holding the lamp cover on the ASK C13. Put the lamp cover to one side.

Step 2: Unscrew the 3 screws holding the ASK Proxima SP-LAMP-001 in the place. Gently lift out the used ASK Proxima SP-LAMP-001. Gently insert the new ASK Proxima SP-LAMP-001 into the projector.

The ASK Proxima SP-LAMP-001 contains mercury and should not be thrown into regular garbage. Recycle your used lamps!

Step 3: Tighten the screws on the new ASK Proxima SP-LAMP-001 lamp. Place the lid back on and tighten the screw holding it in place. You’re ready to reset the lamp timer.

Resetting the Lamp Timer

It’s important to reset the lamp timer of the ASK C13 in order to properly track lamp life. Failure to reset the timer may result in the projector not knowing when the lamp is finished and shutting down suddenly.

To reset the lamp timer:

Open the MENU system.
Scroll down to OPTIONS. Press ENTER.
Scroll down to SERVICE. Press ENTER.
Click on LAMP TIMER RESET.
Click on YES.

Green your projector

Looking for an even less expensive only try replacing the bare ASK SP-LAMP-001 bulb instead of the entire lamp housing.

Watch our step-by-step video on replacing only the lamp.

Tagged with: ASK C13, ASK Proxima SP-LAMP-001, authentic lamps, authentic projector lamps

Solving DLP TV white death for under $300

Shelagh McNallyPosted on June 29, 2012 Posted in FixYourDLP, Projector Lamp Replacement Guides — No Comments ↓

DMD DLP Chip technology

Replace the DMD Chip to solve white death

White dots, white snow or sparkling stars on your DLP TV means only one thing – white death syndrome cause by a worn out DMD chip. The white death syndrome seems to happen when the DLP TVs have been in use anywhere from two to five years – usually when the warranty has expired

Certain brands seem more vulnerable than others to the white death syndrome. Samsung and Mitsubishi DLP TVs have been plagued with the problems for several years now. Sony and JVC choose to take the TVs set off the market in response to complaints from disgruntled owners.

If you read the various forums offering solutions, you’ll see customers being given quotes of $600 and upwards for solving the white spot syndrome or replacing the DMD DLP chip. Fortunately, there are companies offering the offering the DLP chip for under $300.

Find this New Mitsubishi/Toshiba 4719-001997 DLP Chip 1910-6143W on Amazon.

DMD DLP chip

Causes of DLP white death

At the heart of every DLP TV, no matter what the brand is the DMD chip invented in 1987 by Dr. Larry Hornbeck of Texas Instruments. This optical semiconductor contains an array of up to 2 million hinge-mounted microscopic mirrors, so small they measure one-fifth the width of a human hair.

The DMD chip receives the digital or graphic signal reflecting it onto the TV screen to produce the stunning images that have made these TVs a frontrunner for the consumer. The mirrors themselves are made out of aluminum and mounted on a yoke with an axle that literally twists in the middle. The DMD micro mirrors switch on and off, either tilt towards the light or away from it.

This action creates the light or dark pixels on the screen and allows for a staggering 1,204 shades of gray. At the same time, the DLP lamp generates white light that passes through a red, green, and blue color filter to the surface of the DMD chip creating millions of colors.

DLP white dot syndrome happens when one of these micro mirrors gets stuck and can no longer reflect the signal. The result is a white or black dot on the screen. As more and more mirrors become stuck, more white dots appear on screen creating an image that can’t be viewed.

The affordable solution

In order to address the issue, Texas Instrument has created a replacement DMD DLP chip that is affordable and readily available from recognized distributors. While part numbers may vary, the chip remains the same. The following part numbers are interchangeable:

Samsung DMD Chip 4719-001997
Samsung DMD Chip 4719-001985
Samsung DMD Chip 4719-001999
Samsung DMD Chip W1272-5003
Mitsubishi DMD Chip 276P595010
Board Number DMD Panel IC# 1910-6143W
Board Number DMD Panel IC# 1910-6145W
Board Number DMD Panel IC# 1910-6103W

Avoid an expensive repair bill and keep your customers happy by purchasing a DMD DLP chip for under $300.
Find this New Mitsubishi/Toshiba 4719-001997 DLP Chip 1910-6143W on Amazon.

Tagged with: DLP tv, DMD DLP chip, Mitsubishi DLP TV, Samsung DLP TV, white death, white death problem

How to replace the ASK DP800 projector lamp

Shelagh McNallyPosted on June 28, 2012 Posted in FixYourDLP, Projector Lamp Replacement Guides — No Comments ↓

Guide to install a new ASK DP800 projector lamp

When it’s time to replace the ASK DP800 projector lamp, the Alarm Indicator found beside the Power button will light up red. Replace the ASK DP800 projector lamp promptly.

STEP 1: Buy the right lamp

It’s important to install a genuine ASK Proxima SP-LAMP-001 lamp. Avoid generic knock-offs or lamps advertised as “compatible.” Although they appear to be a great bargain, generic lamps actually have a shorter life span and give off poor illumination. These lamps are prone to explosion and have been created using toxic substances such as Krypton-85. Using a counterfeit generic lamp will void any warranty for your ASK DP800 projector.

Buying from an authorized seller of genuine projector lamps ensures installation of a lamp created with the proper components and workmanship that works properly with the key components in your projector. Genuine lamps will give you the sharpest and brightest picture. Learn how to spot a counterfeit lamp.

Buy this lamp on Amazon from the following authorized dealers:

STEP 2: Installing the lamp

1. The lamp cover will be found at the back of the ASK DP800 projector. Loosen the two screws holding the ASK Proxima SP-LAMP-001 lamp cover in place. Remove and place to one side.
2. Loosen the two screws holding the ASK Proxima SP-LAMP-001 Lamp Assembly in place.
3. Grab onto the ASK Proxima SP-LAMP-001 lamp handle and pull the lamp from the projector. Place to one side. Be sure to dispose of the used lamp through a local recycling program. Don’t throw this lamp into the regular garbage as it contains mercury.

The ASK Proxima SP-LAMP-003 contains mercury and should not be thrown into regular garbage. Recycle your used lamps!

4. Place the new ASK Proxima SP-LAMP-001 lamp into the socket being careful not to touch the bare lamp (this can form black spots on the bulb that will ruin the projected image).
5. Tighten the two screws holding the ASK Proxima SP-LAMP-001Lamp Assembly in place.
6. Put the ASK DP800 cover back in place and tighten the two screws.
7. Put the power cord back into the projector and turn it on.

You are now ready to Reset the Lamp Replace Counter.

STEP 3: Resetting the Lamp Timer

It’s important to reset the lamp timer of the ASK DP800 in order to properly track lamp life. Failure to reset the timer may result in the projector not knowing when the lamp is finished and shutting down suddenly.

To reset the lamp timer:

Open the MENU system.
Scroll down to OPTIONS. Press ENTER.
Scroll down to SERVICE. Press ENTER.
Click on LAMP TIMER RESET.
Click on YES.

Tagged with: ASK DP800, ASK Proxima projector lamps, ASK Proxima SP-LAMP-001, authentic lamps

Replacing the ASK C300 projector lamp

Shelagh McNallyPosted on June 28, 2012 Posted in FixYourDLP, Projector Lamp Replacement Guides — No Comments ↓

Guide to replacing the ASK C300 projector lamp

ASK C300 projector

When the ALARM is blinking red it’s time to replace the ASK C300 projector lamp. Follow our quick.

Go with genuine

It’s crucial to install the proper type of ASK Proxima SP-LAMP-001 lamp. Avoid buying generic knock-offs or lamps advertised as “compatible.”

Go with an authentic ASK Proxima SP-LAMP-001 OEM lamp sold by a dependable seller. Counterfeit lamps are prone to explosion and have been created using toxic substances such as Krypton-85. Installing a generic lamp will also void any warranty for your ASK C300 projector.

Using a counterfeit generic lamp may result in poor illumination as well as malfunction of the sensitive components in your projector. Go with a genuine lamp. Learn the 7 Ways to spot a counterfeit lamp.

Buy this lamp on Amazon from the following authorized dealers:

Replacing the lamp

Step 1: Turn off the ASK C300 projector and disconnect the power cord. Allow the projector to cool down before replacing the ASK Proxima SP-LAMP-001. These projectors operate at high temperatures and you run the risk of burning yourself if the projector has not cooled.
Loosen the screw holding the lamp cover on the ASK C300. Put the lamp cover to one side.

Step 2: Unscrew the 3 screws holding the ASK Proxima SP-LAMP-001 in the place. Gently lift out the used ASK Proxima SP-LAMP-001. Gently insert the new ASK Proxima SP-LAMP-001 into the projector.

The ASK Proxima SP-LAMP-001 contains mercury and should not be thrown into regular garbage. Recycle your used lamps! Don’t throw this lamp into regular garbage as it contains mercury.

Step 3: Tighten the screws on the new ASK Proxima SP-LAMP-001 lamp.
Place the lid back on and tighten the screw holding it in place.
You’re ready to reset the lamp timer.

Resetting the Lamp Timer

It’s important to reset the lamp timer of the ASK C300 in order to properly track lamp life. Failure to reset the timer may result in the projector not knowing when the lamp is finished and shutting down suddenly.

To reset the lamp timer:

Open the MENU system.
Scroll down to OPTIONS. Press ENTER.
Scroll down to SERVICE. Press ENTER.
Click on LAMP TIMER RESET.
Click on YES.

Green your projector

Looking for an even less expensive only try replacing the bare ASK LAMP-001 bulb instead of the entire lamp housing.

Watch our step-by-step video on replacing only the lamp.

Tagged with: ASK C300 projector, ASK Proxima SP-LAMP-001, authentic lamps

How to replace the ASK DP8000HB projector lamp

Shelagh McNallyPosted on June 28, 2012 Posted in FixYourDLP, Projector Lamp Replacement Guides — No Comments ↓

ASK DP8000 projector

Guide to replacing the ASK DP8000HB projector lamp

When it’s time to replace the ASK DP8000HB projector lamp, the Alarm Indicator found beside the Power button will light up red. Replace your ASK DP8000HB projector lamp immediately. Use our guide..

STEP 1: Buy the right lamp

It’s important to install a genuine ASK Proxima SP-LAMP-008 lamp. Avoid generic knock-offs or lamps advertised as “compatible.” Although them appear to be a great bargain, generic lamps actually have a shorter life span and give off poor illumination. These lamps are prone to explosion and have been created using toxic substances such as Krypton-85. Using a counterfeit generic lamp will void any warranty for your ASK DP8000HB projector.

Buy this lamp on Amazon from the following authorized dealers:

STEP 2: Installing the new lamp

1. The lamp cover will be found at the back of the ASK DP8000HB projector. Loosen the two screws holding the ASK Proxima SP-LAMP-008 lamp cover in place. Remove and place to one side.
2. Loosen the two screws holding the ASK Proxima SP-LAMP-008 Lamp Assembly in place.
3. Grab onto the ASK Proxima SP-LAMP-008 lamp handle and pull the lamp from the projector. Place to one side. Be sure to dispose of the used lamp through a local recycling program. Don’t throw this lamp into the regular garbage as it contains mercury.

The ASK Proxima SP-LAMP-008 contains mercury and should not be thrown into regular garbage. Recycle your used lamps!

4. Place the new ASK Proxima SP-LAMP-008 lamp into the socket being careful not to touch the bare lamp (this can form black spots on the bulb that will ruin the projected image).
5. Tighten the two screws holding the ASK Proxima SP-LAMP-008 Lamp Assembly in place.
6. Put the ASK DP8000HB cover back in place and tighten the two screws.
7. Put the power cord back into the projector and turn it on.

You are now ready to Reset the Lamp Replace Counter.

STEP 3: Resetting the Lamp Timer

It’s important to reset the lamp timer of the ASK DP8000HB in order to properly track lamp life. Failure to reset the timer may result in the projector not knowing when the lamp is finished and shutting down suddenly.

To reset the lamp timer:

Open the MENU system.
Scroll down to OPTIONS. Press ENTER.
Scroll down to SERVICE. Press ENTER.
Click on LAMP TIMER RESET.
Click on YES.

Tagged with: ASK DP8000HB, ASK Proxima SP-LAMP-001, authentic lamps, authentic projector lamps

When to replace the ASK Proxima SP-LAMP-003

Shelagh McNallyPosted on June 27, 2012 Posted in FixYourDLP, Projector Lamp Replacement Guides — No Comments ↓

ASK Proxima SP-LAMP-003

Installing an ASK Proxima SP-LAMP-003

The ASK Proxima SP-LAMP-003 will run for approximately 1500 -2000 hours before needing to be replaced. It’s important to install a genuine lamp.

Although lower in price initially, these copy cat lamps usually end up costing much more in the long run. Counterfeit generic lamp offer poor illumination that can damage your eyesight, a shorter lamp life and can damage the sensitive components in your projectors. “Compatible” generic lamps are prone to explosion so you also the risk of being exposed to the carcinogenic substance Krypton-85 used in the making of these lamps.

Learn the 7 Ways to spot a counterfeit lamp.

Buy this lamp on Amazon from the following authorized dealers:

Compatible Projectors

The ASK Proxima SP-LAMP-003 is compatible with:

For step-by-step instructions on replacing your ASK Proxima SP-LAMP-003 projector lamp, click on your projector listed below:

ASK M2 projector

Click here for step-by-step instructions on how to change the ASK Proxima SP-LAMP-003 projector lamp for the ASK Proxima M2 projector.

ASK DP-1000X projector

Click here for step-by-step instructions on how to change the ASK Proxima SP-LAMP-003 projector lamp for the ASK DP-1000X projector.

Green your projector

Looking for a less expensive, more environmentally friendly alternative? Are you tech-saavy or just want more information? Watch our step-by-step video on replacing only the ASK Proxima SP-Lamp-003 bulb instead of the entire lamp housing.

Tagged with: ASK DP-1000X, ASK Proxima M2, ASK Proxima SP-LAMP-003, authentic lamps

3 Steps to a new ASK Proxima M2 projector lamp

Shelagh McNallyPosted on June 26, 2012 Posted in FixYourDLP, Projector Lamp Replacement Guides — No Comments ↓

ASK M2 projector

Installing a replacement ASK Proxima M2 projector lamp

When it’s time to replace the ASK Proxima M2 projector lamp, the Alarm indicator located beside the power button will light red. Replace the ASK Proxima M2 projector lamp immediately;

STEP 1: Buying the right lamp

It’s crucial to install the proper type of ASK Proxima SP-LAMP-003 lamp. Avoid buying generic knock-offs or lamps advertised as “compatible.” Go with an authentic ASK Proxima SP-LAMP-003 OEM lamp sold by a dependable seller. Using a counterfeit generic lamp may result in poor illumination as well as malfunction of the sensitive components in your projector.

Counterfeit lamps are prone to explosion and have been created using toxic substances such as Krypton-85. Installing a generic lamp compromises the your health but also voids any warranty for your ASK Proxima M2 projector. Protect yourself and go with an authentic ASK Proxima SP-LAMP-003. Learn the 7 Ways to spot a counterfeit lamp.

Buy this lamp on Amazon from the following authorized dealers:

STEP 2: Installing the new lamp

1. Disconnect the power cord before opening the ASK Proxima M2 lamp lid. The projector should be cool to the touch before changing the lamp. These projectors work under high temperatures and you can burn yourself if the projector has not cooled down for at least one hour for installation.

2. On the ASK Proxima M2 projector, the lamp cover is part of the full lamp cage. Unscrew the 3 screws holding the lamp cover in place. Insert the flat end of the screw driver into the tab on the cover and pop the lid off.

3. Carefully lift the ASK Proxima SP-LAMP-003 out of the projector. Be sure to dispose of the used lamp through a local recycling program.

The ASK Proxima SP-LAMP-003 contains mercury and should not be thrown into regular garbage. Recycle your used lamps!

4. Carefully insert the ASK Proxima SP-LAMP-003 lamp all the way into the ASK Proxima M2 projector. Avoid touching the bare lamp as this may cause it to break. The oil on your fingers will also heat up and cause a black spot to appear on the lamp reducing the quality of the picture.

5. Tighten the three screws holding the ASK Proxima SP-LAMP-003 lamp in place.

6. You’re now ready to reset the lamp timer.

STEP 3: Resetting the Lamp Timer

It’s important to reset the lamp timer of the ASK Proxima M2 in order to properly track lamp life. Failure to reset the timer may result in the projector not knowing when the lamp is finished and shutting down suddenly.

To reset the lamp timer:

Open the MENU system.
Scroll down to OPTIONS. Press ENTER.
Scroll down to SERVICE. Press ENTER.
Click on LAMP TIMER RESET.
Click on YES.

Tagged with: ASK M2 projector, ASK Proxima M2 projector, ASK Proxima SP-LAMP-003, authentic lamps, authentic projector lamps, genuine projector lamps

D.I.Y. quick guide for a new ASK DP-1000X projector lamp

Shelagh McNallyPosted on June 26, 2012 Posted in FixYourDLP, Projector Lamp Replacement Guides — No Comments ↓

Follow our step-by-step guide to install a new ASK DP-1000X projector lamp

When it’s time to replace the ASK DP-1000X projector lamp the ALARM indicator, located on the left hand side of the power button, will light red .

Before installation: Go with a genuine lamp

It’s important to invest in the best ASK Proxima SP-LAMP-003 lamp. Counterfeit generic lamplamps, often advertised as “compatible” lamps may be tempting for their lower prices but should be avoided. Generic lamps have a shorter life span, offer poor illumination and reduced clarity with the pictures. Knockoff lamps are prone to explosion and you run the risk of being exposed to the toxic substances such as Krypton-85 being used by generic manufacturers to achieve the same results.

An OEM ASK Proxima SP-LAMP-003 lamp has been created with an individually adjusted holder that works specifically with the ASK DP-1000X projector to your projector model. Installing a genuine ASK Proxima SP-LAMP-003 ensures a projector that is working properly and keeps your warranty in place. Most OEM resellers offer technical support as well. Educate yourself and learn The 7 Ways to spot a counterfeit lamp.

Buy this lamp on Amazon from the following authorized dealers:

Replacing the lamp

1. Disconnect the power cord before opening the ASK DP-1000X lamp lid. The projector should be cool to the touch before changing the lamp. These projectors work under high temperatures and you can burn yourself if the projector has not cooled down for at least one hour for installation.

2. On the ASK DP-1000X projector, the lamp cover is part of the full lamp cage. Unscrew the 3 screws holding the lamp cover in place. Insert the flat end of the screw driver into the tab on the cover and pop the lid off.

3. Carefully lift the ASK Proxima SP-LAMP-003 out of the projector. Be sure to dispose of the used lamp through a local recycling program.

The ASK Proxima SP-LAMP-003 contains mercury and should not be thrown into regular garbage. Recycle your used lamps!

4. Carefully insert the ASK Proxima SP-LAMP-003 lamp all the way into the ASK DP-1000X projector. Avoid touching the bare lamp as this may cause it to break. The oil on your fingers will also heat up and cause a black spot to appear on the lamp reducing the quality of the picture.

5. Tighten the three screws holding the ASK Proxima SP-LAMP-003 lamp in place.

6. You’re now ready to reset the lamp timer.

Reset the lamp timer

It’s important to reset the lamp timer of the ASK DP-1000X projector in order to properly track lamp life. Failure to reset the timer may result in the projector not knowing when the lamp is finished and shutting down suddenly.

To reset the lamp timer:

Open the MENU system.
Scroll down to OPTIONS. Press ENTER.
Scroll down to SERVICE. Press ENTER.
Click on LAMP TIMER RESET.
Click on YES.

Green your projector

Save money, go green

Tagged with: ASK DP-1000X projector, Ask proxima projectors lampss, ASK Proxima SP-LAMP-003, authentic lamps

Step-by-step instructions for ASK Proxima DP-9210 lamp replacement

Shelagh McNallyPosted on June 20, 2012 Posted in FixYourDLP, Projector Lamp Replacement Guides — No Comments ↓

Installing a new ASK Proxima DP-9210 lamp

If the picture is dim or looks unnatural the ASK Proxima DP-9210 lamp may be reaching its end of life. If the Replace Lamp Indicator light on the front panel is blinking orange, you must replace the ASK Proxima DP-9210 lamp immediately. Follow our simple step-by-step instructions to replace your lamp in the ASK Proxima DP-9210 projector easily.

Finding the right lamp

Buy your ASK Proxima LAMP-014 from an authorized manufacturer and avoid the lower-priced knock-off lamps. These counterfeit lamps are usually made with inferior parts including including toxic substances carcinogenic substance Krypton-85 that are a health risk. Prone to exploding and with a much shorter shelf life, generic lamps may end up costing you more particularly if they damage the sensitive mechanisms in your ASK Proxima DP-9210 projector. Buying from a legitimate source keeps your projector under warranty and gives you a solid guarantee.

Buy this lamp on Amazon from the following authorized dealers:

Replacing the ASK Proxima LAMP-014 Lamp

Allow the ASK Proxima DP-9210 projector to thoroughly cool before changing the lamp. Turn off the projector, unplug the AC cord and allow 45 to 60 minutes for the projector to cool. These projectors operate under high heat and there is a possibility of being burned, if the projector is not fully cooled before changing the ASK Proxima LAMP-014 lamp.
The lamp cover for the ASK Proxima DP-9210 projector is located at the bottom of the projector. Gently turn over the projector onto its side and loosen the screw holding the cover in place. Place the cover to one side.
Inside you’ll find the ASK Proxima LAMP-014 lamp cage. Loosen both screws holding the lamp cage in place. Grab the lamp handle and gently lift the lamp out of its socket. Place to one side. Be sure to dispose of the lamp properly through a local recycling program.
Take the new ASK Proxima LAMP-014 lamp cage by the handle—avoid touching the actual bulb as this can break or damage the lamp. Without forcing the lamp, place it into the slot.
Once the lamp is in, tighten both screws on the ASK Proxima LAMP-014 Lamp Assembly. Make sure the screws have been tightened properly or the ASK Proxima DP-9210 projector will not turn on.
Replace the Lamp Cover and tighten the screw. Re-connect the power cord and turn on the ASK Proxima DP-9210 projector. If the ASK Proxima LAMP-014 lamp does not turn on after the warm-up period, try re-installing the lamp. Reset the Lamp Counter Screen by following the instructions below.

NOTE: Your old ASK Proxima LAMP-014 lamp should be properly recycled. These lamps contain mercury and can’t be placed into common garbage.

Resetting the Lamp Replacement Monitor

In order for the projector to properly track the lamp life of your ASK Proxima LAMP-014 you’ll need to reset the Lamp Replacement Monitor Timer. Failure to do so can result in the Replace Lamp Indicator not tracking the lamp life properly.

Turn the ASK Proxima DP-9210 projector on.
Press the POINT LEFT/RIGHT button to move to SETTING option.
Press SELECT to display the SETTING menu.
Using the POINT UP/DOWN button move through the list to the LAMP AGE option. Press SELECT.
The message “Lamp replace monitor Reset?” will be displayed.” Cursor down and highlight YES. Press SELECT.
The second messge “OK?” appears. Click on YES. Press SELECT.
Move the arrow to QUIT and leave the menu area.

RESET the Lamp Replacement Monitor Timer ONLY WHEN the lamp has been REPLACED.

Eco-friendly alternative

Looking for a green alternative? Try replacing only the bulb and re-using the same plastic cage. Watch this Ask Proxima replacement guide to find out more.

Get the ASK Proxima LAMP-014 to last longer with these tips:

Keep your air filters clean to avoid overheating the projector.
Turn off the ASK Proxima DP-9210 and let it stand for at least one hour ever 24 hours.
Make sure there is enough airflow around the projector particularly if it’s been permanently mounted.
Top tips for extending DLP projector lamp life

Tagged with: ASK genuine projector lamps, ASK Proxima DP-9210, ASK Proxima POA-LMP14, authentic projector lamps, replacement projector lamps