About Us - Page 149 of 171 - DLP Lamp Guide - LCD and DLP Repair Tips - Fix Your DLP

Sony Grand WEGA KDF-E55A20

fixyourdlpPosted on November 28, 2007 Posted in TV Reviews — No Comments ↓

To purchase a replacement lamp for this TV, click here

The Sony Grand WEGA KDF-E55A20 is a 55” widescreen high definition LCD projection TV. It has an aspect ratio of 16:9, and a native resolution of 1366 x 768. It supports both the NTSC and ATSC colour systems, in numerous video modes such as 480i, 480p, 720p and 1080i.

The Sony Grand WEGA KDF-E55A20 has a number of input connector ports. At the back, it has 2 sets of composite HD input connectors, a CableCard slot, a 1/8” mini headphone jack, a HDMI port, a Co-Ax tuner port, 2 sets of 4 pin DIN S-Video ports, and 3 sets of Composite RCA input connectors.

The Sony Grand WEGA KDF-E55A20 usually comes in black colour, and requires a power supply of 120V, and consumes 210 Watts of power on normal use, and 17 Watts of power on standby. It weighs approximately 93 lbs, and it’s dimensions are 57.4″ x 37.3″ x 19.4″.

The Sony Grand WEGA series has many features such as usage of the 3LCD Technology, WEGA Engine™ System, Cinema Black Pro, ATSC Integrated Tuner with CableCARD™ Slot, WEGA GATE™ – Easy Operation Guide, Stylish Design, PC Input, HDMI (High Definition Multimedia Interface), TOS Link, Dolby® Digital.

Discount-Merchant.com is among the nation’s largest plasma and LCD TVs replacement parts providers. If you need replacement PCBs, remotes, outer cases, stands, or anything else related to Plasma and LCD TVs, visit Discount-Merchant.com

To purchase a replacement lamp for this TV, click here

JVC HD-56FN97

fixyourdlpPosted on November 28, 2007 Posted in JVC D-ILA — No Comments ↓

To purchase a replacement lamp for this TV, click here

The JVC HD-56FN97 is a 56” High Definition Widescreen TV from JVC. It uses the LCOS technology. Its native resolution is 1920 x 1080. Hence it is able to support full 1080 HD. It has an aspect ratio of 16:9. It supports the NTSC and ATSC colour systems in a number of video modes like 480i, 480p, 720p, 1080i, 1080p_60, 1080p_30, etc.

Like most other HDTVs, The JVC HD-56FN97 has a number of input connectors. At the back, it has 2 sets of component HD input connectors, a CableCARD port, 2 FireWire ports, 2 HDMI ports, a Co-Ax tuner port., an RGB PC port, 2 sets of 4 pin DIN S-Video ports and 3 sets of composite RCA input connectors. In the front, it has another Composite RCA input connector set.

The JVC HD-56FN97 usually comes in black colour, and needs a power supply of 120V. It consumes 215 Watts while working. It’s approximate weight is 88 lbs, and it’ dimensions are 50.9″ x 37.1″ x 17.7″. It is equipped with JVC’s 3 chip D-ILA technology, supporting ‘True 1080p”. It also uses GENESSA picture processor and D.I.S.T 1080p (Digital Image Scaling Technology).

To purchase a replacement lamp for this TV, click here

RCA Scenium HD61THW263

fixyourdlpPosted on November 27, 2007 Posted in TV Reviews — 2 Comments ↓

To purchase a replacement lamp for this TV, click here

The RCA Scenium HD61THW263 is a 61” High Definition wide screen Projection TV from RCA. It has a native resolution of 1280 x 720, and uses the DLP light engine. It has an aspect ratio of 16:9 and a pixel pitch of 0.16 H x V. It can display 16.7 million colours, and has a viewing angle of 40 degrees vertical x 160 deg horizontal. It comes with an anti reflective screen filter on its high gain, high resolution screen.

The RCA Scenium HD61THW263 supports the NTSC and ATSC colour systems, in the 480i, 480p, 720p and 1080i video modes.

The RCA Scenium HD61THW263 has a lot of input connectors. It has 2 component HD input connectors, a CableCard port, an RJ-45 internet port, 2 FireWire ports, a HDMI port, 2 sets of Co-Ax tuner ports, 2 sets of 4 pin DIN S-Video input connectors, and two sets of composite RCA input connectors. It is one of the few HDTVs which don’t have ports at the front or side.

The RCA Scenium HD61THW263 usually comes in silver colour and weighs approximately 135 lbs. It’s dimensions are 62.2″ x 46.7″ x 6.9″.

To purchase a replacement lamp for this TV, click here

Philips 42PF9630A

fixyourdlpPosted on November 27, 2007 Posted in TV Reviews — No Comments ↓

To purchase a replacement lamp for this TV, click here

The Philips 42PF9630A is a 42” Widescreen High Definition TV from Philips. It has an aspect ratio of 16:9, a contrast ratio of 10000:1 and a brightness measure of 1500cd/m². It also has various features for picture enhancement such as Progressive Scan, Active Control Light sensor, Jagged Line Suppression, Widescreen Plus, Pixel plus 2 HD and 3D Comb filter. It supports ATSC and NTSC colour systems, in various video modes such as 480i, 480p, 720p and 1080i. It has a viewing angle of 160 degrees, and its native resolution is 1024 x 768. It also has Ambilight technology, to give a more complete HD experience.

As most other HDTVs, it has a host of input connectors. It has a CableCard port, 2 sets of HDMI ports, a Co-Ax tuner port, 2 sets of 4 pin DIN S-Video ports, and 2 sets of Composite RCA ports. In the side, it has another 4 pin DIN S-Video port and a Composite RCA port, along with a 1/8” mini headphone jack, 2 USB ports, and a memory card slot.

The Philips 42PF9630A comes in black, and needs a power supply of 100V – 250V, and consumes 426 Watts of power. It’s dimensions without the stand or speakers are 48.8″ x 26.8″ x 4.1″, and it weighs approximately 93lbs.

To purchase a replacement lamp for this TV, click here

Zenith D60WLCD

fixyourdlpPosted on November 26, 2007 Posted in Zenith and LG — No Comments ↓

To purchase a replacement lamp for this TV, click here

The Zenith D60WLCD is a 60” Wide screen High Definition LCD TV from Zenith. It has an aspect ratio of 16:9, and a native resolution of 1280 x 720. It has a contrast ratio of 350:1 and a brightness of 350 cd/m². It has a not so good viewing angle of 50 degrees vertical and 110 degrees horizontal, and 16.7 million displayable colours. It also supports Picture in Picture, and 3:2 Pull down.

The Zenith D60WLCD supports only the NTSC colour system and is available only in the 720p video mode. In the back, it has 2 sets of 3RCA Composite HD input connectors, a Co-Ax tuner port, an RGB PC port, a 4 pin DIN S-Video port, and a composite RCA input connector. In the front, it has another 4 pin DIN S-Video port and a Composite RCA input connector port.

The Zenith D60WLCD has a number of viewing modes such as Normal, Wide, Panorama and Zoom, and has aspect ratio correction. The output resolutions can either be NTSC, VGA, SVGA, XGA or HD.

The Zenith D60WLCD comes in silver colour, and has dimensions 56.8″ x 42.5″ x 17.5″ excluding the stand and the speakers. It weighs approximately 132lbs.

To purchase a replacement lamp for this TV, click here

Reset your Panasonic Lamp Counter After Installing a new lamp

FixYourDLP.comPosted on November 24, 2007 Posted in Panasonic — No Comments ↓

If you need to purchase a replacement lamp (TY-LA1000) for your Panasonic Projection LCD TV, we recommend our sister site, Discount-Merchant.com. Discount-Merchant.com is consistently the low price leader on all the Projection TV Lamps and Plasma/LCD parts carried in stock.

For the best price on the TY-LA1000 Enclosure, click here.

INSTRUCTIONS:

1) Press the POWER button to turn on your TV
2) Press and hold the VOLUME DOWN button on the TV Set (not the remote, the actual TV)
3) Press and hold the PIP (Picture in Picture) or SPLIT/PLAY button on your REMOTE control
4) After about 5 seconds, the lamp service menu should appear and say your lamp counter has been reset. That’s it, your all done 🙂

Shop for this lamp on Amazon sold by these authorized distributors:

samsung help

tmcbrayPosted on November 24, 2007 Posted in Samsung — No Comments ↓

I have a Samsung DLP that I just put in a new lamp mdl BP96-00826A. I started the tv up in service mode to reset the lamp hour meter, but accidently hit reset on another feature. Now the tv turns on and I only get sound, you can see the light coming out the back of the tv but no picture and I can not get it back to service mode. I have tried the mute+1+8+2+power and I get the welcome chime and then tv sound.

Tagged with: samsung, troubleshooting

LG 42PX4D

fixyourdlpPosted on November 24, 2007 Posted in Zenith and LG — No Comments ↓

To purchase a replacement lamp for this TV, click here

The LG 42PX4D is a High Definition, Widescreen, Plasma TV from LG. It has a native resolution of 1024 x 728, and an aspect ratio of 16:9. It has 1.1 Billion displayable colours, a contrast ratio of 5000:1 and a brightness measure of 1000cd/m². Its maximum viewing angle is 160 degrees, and has an approximate viewing life of 60,000 hours. It also comes with an anti glare screen filter. It supports the NTSC and ATSC colour modes in the 480i, 480p, 720p and 1080i video modes.

The LG 42PX4D has a range of input connectors. It has, at the back, a Memory Card slot, a CableCard slot, 2 sets of 5 RCA DTV connectors, a 1/8” mini headphone jack, a FireWire port, a HDMI port, 2 Co-Ax tuner ports, an RGB PC port, a 4 pin DIN S-Video port and a Composite RCA Port. Apart from these, it has another S-Video port and a Composite port in the side.

The LG 42PX4D usually comes in black, and needs an input power supply ranging from 100V to 220V. It consumes 550 Watts of power. It’s approximate dimensions are 49.3″ x 25.7″ x 4.0″, and it weighs approximately 100 lbs.

To purchase a replacement lamp for this TV, click here

Samsung HLR6167W

fixyourdlpPosted on November 24, 2007 Posted in Samsung — 1 Comment ↓

To purchase a replacement lamp for this TV, click here

The Samsung HLR6167W is a 61” Widescreen High definition TV from Samsung. It has a native resolution of 1280 x 720. It has an aspect ratio of 16:9, a contrast ratio of 2500:1 and a brightness measure of 600 cd/m². It uses the DLP light engine for display, and supports the NTSC and ATSC colour systems in various video modes such as 480i, 480p, 720p and 1080i.

The Samsung HLR6167W has a host of input connectors, both at the back and front. At the back, it has 2 sets of component HD connectors, a CableCard port, 2 Firewire ports, a DVI input port, a 1/8” mini headphone jack, a HDMI connector, a Co-Ax tuner port, 2 sets of RGB PCV ports, 2 sets of 4 pin DIN S-Video ports and 2 sets of Composite input connectors. In the front, it has another 4 pin DIN S-Video port and a set Composite RCA input connector.

The bezel is usually black in colour, and the Samsung HLR6167W needs a power supply of 110V – 120V. It consumes 230 Watts of power. It’s dimensions without the stand or speakers are 56.9″ x 41.6″ x 18.4″, and it weighs approximately 95lbs.

To purchase a replacement lamp for this TV, click here

Reemplazo de Lampara Mitsubishi 915P049A10

JavierPosted on November 23, 2007 Posted in Mitsubishi en Español — 2 Comments ↓

MITSUBISHI

915P049A10

Lampara Osram P-vip 132 – 150 / 1.0 ASP

132150w / 1.0

132-150w-1.0 asp

132w150w / 1.0

p-vip132-150 / 1.0

pvip132-150 -1.

132150/1.0asp

Base portalamparas 8091A631087867

Cubierta portalampara 51.l6826

Cambio de Lampara

Para este reemplazo necesitas:

1 destornillador Philips(de cruz) 1 pinzas de punta y 1 desarmador plano chico.

Apoyo visual mediante fotografias (Puedes agrandar las fotografias dando click sobre ellas)

AVISO IMPORTANTE : El reemplazo de la lampara Original Osram , por la equivalente Osram, esta no tiene ahumento en la parte frontal de la lampara , lo cual no afecta en nada su funcionamiento ni su luminosidad

1.- Quitar cubierta del portalampara 51.l6826, alzando cuidadosamente con un desarmador , los seguros de la cubierta que van en la ranuras de sujecion de la Base del portalamparas 8091A631087867 jalandola hacia arriba , para destrabarla.

2.- Retirar tornillo y tuerca de los bornes de la lampara y liberar los cables a la lampara P-vip132-150 /1.0 ASP

3.- Retira (1) tornillo y el clip de sujecion Base portalamparas 8091A631087867

4.- Aflojar (2) tornillos de los clips de sujecion de Base portalamparas 8091A631087867 y retirar la lampara P-vip132-150 /1.0ASP , alzandola un poco y jalandola hacia afuera .

A.- Poner la lampara P-vip132-150 / 1.0ASP nueva , introduciendola un poco inclinada a modo que se quede entre en los (2) clips de sujecion del portalampara 8091A631087867

B.- Reinsertar tornillo y clip de sujecion de la lampara P-vip132-150 /1.0ASP y apretar.observar posicion del clip coincida con ranura

C.- Fijar los cables, con la tuerca y tornillo en los bornes de la lampara P-vip132-150 /1.0ASP y apretar firmamente

Quedando armada nuevamente la Lampara osram P-vip 132-150/1.0ASP en su Base portalampara 8091A631087867

D.- Reinstalar la cubierta 51.l6826, alineandola hacia los seguros de sujecion y empujandola firmemente hasta su reinsercion en las ranuras correspondientes

Lista lampara mitsubishi 915P049A10

Tienes dudas o preguntas para el reemplazo de lamparas visita:

http://guides.fixyourdlp.com/guides.php

Si necesitas comprar el reemplazo para esta lampara visita Discount Merchant.

Si requieres otras refacciones o lamparas vista DM ellos tienen entrega directa a tu domicilio en cualquier Pais.

Mitsubishi-915P049A10