If anyone want this POS, I'm up for price negotiations.
Search found 7 matches
- Tue Oct 06, 2015 10:50 pm
- Forum: Mitsubishi Discussion
- Topic: Error 61
- Replies: 2
- Views: 6254
Re: Error 61
If anyone want this POS, I'm up for price negotiations.
- Thu Sep 17, 2015 10:19 pm
- Forum: Mitsubishi Discussion
- Topic: Error 61
- Replies: 2
- Views: 6254
Re: Error 61
- Wed Sep 16, 2015 6:14 pm
- Forum: Mitsubishi Discussion
- Topic: Error 61
- Replies: 2
- Views: 6254
Error 61
My WD-73C12 television is 3 years old and is once again giving me the dreaded "61" error code....if it starts up at all. This first happened about two years ago while it was still under warranty. The shop ended up replacing both the main board and the light engine. The power supply is the only origi...
- Mon Jun 06, 2011 11:29 am
- Forum: Samsung Discussion
- Topic: hlr4667wx does not turn on - NO lights blinking
- Replies: 2
- Views: 4441
Re: hlr4667wx does not turn on - NO lights blinking
Make sure the back cover is tight also, there's an interlock switch that prevents the TV from being turned on while the cover is off.
- Sun Feb 13, 2011 9:57 pm
- Forum: Samsung Discussion
- Topic: Identical TVs...Different Bulbs
- Replies: 3
- Views: 5008
Re: Identical TVs...Different Bulbs
Oh OK....good to know! Thank you. :)
- Sun Feb 13, 2011 1:46 pm
- Forum: Samsung Discussion
- Topic: Identical TVs...Different Bulbs
- Replies: 3
- Views: 5008
Identical TVs...Different Bulbs
I own two of the HLR4667WAX/XAA TVs, bought at different times. I keep a used lamp on hand as a temporary spare while waiting for a replacement to be shipped...it came out of TV1. I had a problem with TV2 (randomly shutting off, no other failure indications at all) so I wanted to swap the lamp first...
- Sun Feb 13, 2011 1:11 pm
- Forum: Samsung Discussion
- Topic: My DLP lamp went for 21,339Hrs
- Replies: 3
- Views: 5378
Re: My DLP lamp went for 21,339Hrs
Because you did have the TV on for 24-48 hours straight at times is most likely why it did last over 21000 hours. Most failures (for most any device) will occur when tranistioning between states....off-to-on, etc. Leaving it on saved it the "shock" of starting.