Search found 6 matches

by Maymoon
Mon Jun 22, 2009 6:13 pm
Forum: Plasma Televisions
Topic: erqerteyhrt546
Replies: 1
Views: 7647

erqerteyhrt546

Hi,Thank you in advance for your help and reply to my techinical questions: I am an electronic tech and have a 1999 Fujitsu model PDS4214w-s Plasma 42" monitor/tv Here is the symtom: It turns on fine ( Red standby light turns to green and stays green NO red Flashing light even after the problem...
by Maymoon
Thu Jun 18, 2009 3:41 pm
Forum: Sony LCD Projection Discussion
Topic: Reset Lamp is near to end message
Replies: 1
Views: 6092

Reset Lamp is near to end message

Hi, I purchased a new lamp for my Sony TV and the message that says “the lamp is near end of life” still displays when I turn the TV on after I replaced the lamp. Do you know how I turn this message off or reset it? I don’t see anything in the TV manual I have that came with the TV. Thanks
by Maymoon
Tue Jun 09, 2009 5:51 pm
Forum: Samsung Discussion
Topic: shadow line
Replies: 3
Views: 6007

shadow line

my samsung dlp tv ,model hlr4266w has a shadow line running dow the left side of screen about 2 inches wide, what part do i need to fix this and do you have one? :?:
by Maymoon
Tue Jun 09, 2009 5:49 pm
Forum: Sony LCD Projection Discussion
Topic: KDF-60WF655 Blue blotch
Replies: 2
Views: 8612

KDF-60WF655 Blue blotch

This tv has the dreaded blue blob along bottom, right side and a huge light haze in center. If light engine problem do you have possible solution?

Merci
by Maymoon
Mon May 04, 2009 8:16 pm
Forum: Plasma Televisions
Topic: LG 42PC1DA lost display
Replies: 1
Views: 7571

LG 42PC1DA lost display

Hi,my customer has an LG 42PC1DA Plasma tv. All of a sudden it lost display, the sound is ok and the tv responds to the remote but the screen stays black. Do you have an idea what the problem could be? P.s the power led flashes 6 or 7 times when i turn the tv on, can't be sure if it did this before ...
by Maymoon
Mon May 04, 2009 8:11 pm
Forum: Plasma Televisions
Topic: PLasma P42W46X pic dark with shadows
Replies: 1
Views: 7849

PLasma P42W46X pic dark with shadows

My customer has a Zenith/ LG plasman model P42W46X. The picture went dark with shadows. I think this is usually a ZSUS board. The top fuse on the board is blown. Put in another and it popped immediately. Checked the voltage coming in noted as 15V. It is 21V. So, I assume the ZSUS board is bad, but w...

Go to advanced search