WD-65735 issue


Moderator: Angel

Forum rules
frankfort16
Newbie
Newbie
Posts: 2
Joined: Tue May 11, 2010 4:51 am

WD-65735 issue

Postby frankfort16 » Tue May 11, 2010 5:08 am

i have a WD-65735 dlp. it turns on and i have sound and everything was working fine til tonight. i still have a picture and sound but my screen is much darker, watchable but barely. what is the issues? any help at all will be great.

thanks for the time

User avatar
ChubbsTech
TV Wizard
TV Wizard
Posts: 404
Joined: Thu Feb 18, 2010 12:53 am
Location: Santa Ana Ca.

Re: WD-65735 issue

Postby ChubbsTech » Tue May 11, 2010 5:56 pm

Hello frankfort16.
There is a very high possibility that you just need to replace your lamp. A very common sign that you need a new lamp is when your picture is getting dimmer & dimmer, after some time only the sound remains. Another possible cause could be the ballast, but I highly doubt it, first focus on discarding the lamp by replacing it.
Here is a post that describes that in more detail.
viewtopic.php?f=10&t=1263
Good luck.
Remember Knowing Is Half The Battle !

frankfort16
Newbie
Newbie
Posts: 2
Joined: Tue May 11, 2010 4:51 am

Re: WD-65735 issue

Postby frankfort16 » Tue May 11, 2010 6:10 pm

i was thinking it was the lamp but all the people i have talked to said i would have a red or yellow flashing light on the tv and i have had neither. thats why im confussed.....

User avatar
ChubbsTech
TV Wizard
TV Wizard
Posts: 404
Joined: Thu Feb 18, 2010 12:53 am
Location: Santa Ana Ca.

Re: WD-65735 issue

Postby ChubbsTech » Tue May 11, 2010 10:14 pm

Hello again frankfort16.
First of all, is your lamp older than 2 or 3 years? If yes, then it’s more than obvious that you need a new lamp, regardless if the problem is not the lamp. Plus it’s the easiest & cheapest part to replace then any other.
Good luck.
Remember Knowing Is Half The Battle !


Return to “Mitsubishi Discussion”