mitubishi dlp wd-60735 lamp hour reset


Moderator: Angel

Forum rules
Brandon0825
Newbie
Newbie
Posts: 2
Joined: Mon Nov 07, 2011 4:55 pm

mitubishi dlp wd-60735 lamp hour reset

Postby Brandon0825 » Mon Nov 07, 2011 5:12 pm

Ok I purchased a new lamp with housing an it works fine. But after a little while the tv will shut off an the lamp led (red) will come back on. I have followed the steps to manually reset the lamp hours. By turning the tv on an pressing menu, 2470, to intialize. This screen shows lamp hours at 1226. I intialize it an the tv shuts down green led will start blinking. With the flashing stops I power the tv on. Now I was told that when the tv powers back on it will show you that the lamp hours have been reset. It does not it goes to a screen were it ask you to select an language. The tv will work for like a day an then I have to repeat this process. An each time it shows me that the hours have not been reset. Am I doing something wrong or missing a step please help me clearify what to do. Thank you!

Return to “Mitsubishi Discussion”