wd 62725 red light blinking code 37


Moderator: Angel

Forum rules
fourdyford
Newbie
Newbie
Posts: 1
Joined: Wed Mar 16, 2011 6:38 am

wd 62725 red light blinking code 37

Postby fourdyford » Thu Mar 17, 2011 4:19 am

My chassis has been sent in about a year ago to mitsubishi (lines thru screen, shutting down not being able to reset) and has been fine till last month. Blew a bulb. Put new bulb in (old one only a year old) and has been fine till last week. TV shuts off and red light blinks. Code is 37 Engine or Lamp fan. Reset and tv works for 2 to 8 hours and does the same thing. Should I go ahead and replace the fans? Really don't want to call the man.

User avatar
BYO
Tech Junkie
Tech Junkie
Posts: 103
Joined: Fri Mar 13, 2009 12:01 am
Location: San Francisco CA

Re: wd 62725 red light blinking code 37

Postby BYO » Wed Mar 23, 2011 8:36 pm

I will definitely try to change the fans first since changing the engine will be very expensive.
I found the set of your fans here:
http://www.discount-merchant.com/MITSUB ... 170814.htm

If situation persist after replacing this fans, than we will need to continue troubleshooting.
[color=#40FF40]Change is the only constant, we must become the change we want to see. [/color]


Return to “Mitsubishi Discussion”