I signed up here from a link from the Shack While I had to wait to get approved to post I had already repaired the PRojector.. But I will post here what had happened and tsome pics of it..
WEll I was gaming one night late and I had looked over at my left screen, I run NVidia 3D Surround with 3 PRojecotrs, I noticed a dark spot on the screen.. Well I thought it was a blob of dust or something and then I smelled something burning. I quickly shut off the Projector and let it cool for a bit then took it apart..
I was looking around when I noticed some brown stuff on the lens.. It was the lens in the Light module, so I took it apart and low and behold the lens had been burnt to a crisp.. WEll I looked around and found a lens on ebay but it was plastic, I wanted to try and find a glass lens but after a ferw days I had no success in tracking down a glass lens or any lens for that matter..
So I ordered the lens from ebay and after about 4 days I got it in the mail and went to work.. I reassembled the lens and when I fired it back up it worked but in the top right there was a shadow.. I thought it was the tape that covered the hole in the light module , so I took it back apoart and looked at the tape and saw it was not that.
I disassembled the light module that housed the 3 lenses and looked at the lens I put in and I checked the service manual and it appeared I had put the lens in the wrong way.. Well I realigned it and assembled the light engine which was a bit tricky but finally managed to get it.. I fired it up and voila worked good as new.. I had taken some pics and here they are: