hello i have a p50hdm and just finished replacing the y and x Sus boards now
every thing works fine the only thing is there are red flashing pixels on the
screen. i read some where that i might have to make a adj..
please help or if you can point me in the right dir.
stefan
The original problem why I purchased the parts was that it just turned off and never came back on. The green LED would flash 10 times and then would stop.
vizio p50hdm flashing red pixels
Moderator: Angel
Forum rules
Re: vizio p50hdm flashing red pixels
flashing pixels can be a product of a bad sustain board or buffers. Can you be more specific on your repair?
Eddie
Re: vizio p50hdm flashing red pixels
Jemtech,
To me it seems like your Y-Sustain board(most likely) or X-Sustain board are starting to fail.. Read this post here:
viewtopic.php?f=6&t=241
And then the red dot post I have here:
viewtopic.php?f=6&t=868
I think the 2nd post explains the red dot affect you are posting about.
Good luck!
To me it seems like your Y-Sustain board(most likely) or X-Sustain board are starting to fail.. Read this post here:
viewtopic.php?f=6&t=241
And then the red dot post I have here:
viewtopic.php?f=6&t=868
I think the 2nd post explains the red dot affect you are posting about.
Good luck!