ASK Proxima SP-LAMP-001 projector lamp

Compatible projectors using the ASK Proxima SP-LAMP-001 projector lamp

You can expect between 1500-2000 hours from your ASK Proxima SP-LAMP-001 projector lamp depending on how usagae and maintenance

When it’s time to replace the ASK Proxima SP-LAMP-001 lamp, the ALARM button next to the power control will light up red.

Go with genuine

It’s important to install a genuine ASK Proxima SP-LAMP-003 rather than a generic “compatible” lamp.

Although lower in price initially, these copy cat lamps usually end up costing much more in the long run. Counterfeit generic lamp offer poor illumination that can damage your eyesight as well as a shorter lamp life. Since these lamps are made with poor workmanship and inferior materials they often damage the sensitive components in your projectors. “Compatible” generic lamps are prone to explosion so you also have the risk of being exposed to the carcinogenic substance Krypton-85 used in the making of these lamps.

Go with genuine and get a lamp that keeps your projector working and your warranty good. The OEM resellers offer technical support as well as a guarantee that the ASK Proxima SP-LAMP-001 lamp you are installing will work properly.

Learn the 7 Ways to spot a counterfeit lamp.

Buy this lamp on Amazon from the following authorized dealers:

• SpArc Bronze for Ask Proxima SP-LAMP-001 Projector Replacement Lamp with Housing
• Lutema SP-LAMP-001-L02-2 Ask Proxima LCD/DLP Projector Lamp (Premium)
• Lutema Economy for Ask Proxima SP-LAMP-001 Projector Lamp with Housing

Compatible Projectors

The ASK Proxima SP-LAMP-001 is compatible with the following projectors

• ASK C13
• ASK C300
• ASK DP800

For step-by-step instructions on replacing your ASK Proxima SP-LAMP-001 projector lamp, click on your projector listed below:

ASK C13 projector, ASK Proxima SP-LAMP-001

Click here for step-by-step instructions on how to change the ASK Proxima SP-LAMP-001 projector lamp for the ASK C13 projector.

ASK C300 projector

Click here for step-by-step instructions on how to change the ASK Proxima SP-LAMP-001 projector lamp for the ASK C300 projector.

ASK DP800 projector

Click here for step-by-step instructions on how to change the ASK Proxima SP-LAMP-001 projector lamp for the ASK DP800 projector.

Green your projector

Looking for an even less expensive option? Watch our step-by-step video on replacing only the bare ASK Proxima SP-LAMP-001 instead of the entire lamp housing.

The post Replacing the ASK Proxima SP-LAMP-001 projector lamp appeared first on DLP Lamp Guide - LCD and DLP Repair Tips - Fix Your DLP - FixYourDLP.com.

ASK C300 projector

When the ALARM is blinking red it’s time to replace the ASK C300 projector lamp. Follow our quick.

Go with genuine

It’s crucial to install the proper type of ASK Proxima SP-LAMP-001 lamp. Avoid buying generic knock-offs or lamps advertised as “compatible.”

Go with an authentic ASK Proxima SP-LAMP-001 OEM lamp sold by a dependable seller.  Counterfeit lamps are prone to explosion and have been created using toxic substances such as Krypton-85. Installing a generic lamp will also void any warranty for your ASK C300 projector.

Using a counterfeit generic lamp may result in poor illumination as well as malfunction of the sensitive components in your projector.  Go with a genuine lamp. Learn the 7 Ways to spot a counterfeit lamp.

Buy this lamp on Amazon from the following authorized dealers:

• SpArc Bronze for Ask Proxima SP-LAMP-001 Projector Replacement Lamp with Housing
• Lutema SP-LAMP-001-L02-2 Ask Proxima LCD/DLP Projector Lamp (Premium)
• Lutema Economy for Ask Proxima SP-LAMP-001 Projector Lamp with Housing

Replacing the lamp

Step 1: Turn off the ASK C300 projector and disconnect the power cord. Allow the projector to cool down before replacing the ASK Proxima SP-LAMP-001. These projectors operate at high temperatures and you run the risk of burning yourself if the projector has not cooled.
Loosen the screw holding the lamp cover on the ASK C300. Put the lamp cover to one side.

Step 2: Unscrew the 3 screws holding the ASK Proxima SP-LAMP-001 in the place. Gently lift out the used ASK Proxima SP-LAMP-001. Gently insert the new ASK Proxima SP-LAMP-001 into the projector.

The ASK Proxima SP-LAMP-001 contains mercury and should not be thrown into regular garbage. Recycle  your used lamps! Don’t throw this lamp into regular garbage as it contains mercury.

Step 3: Tighten the screws on the new ASK Proxima SP-LAMP-001 lamp.
Place the lid back on and tighten the screw holding it in place.
You’re ready to reset the lamp timer.

Resetting the Lamp Timer

It’s important to reset the lamp timer of the ASK C300 in order to properly track lamp life. Failure to reset the timer may result in the projector not knowing when the lamp is finished and shutting down suddenly.

To reset the lamp timer:

• Open the MENU system.
• Scroll down to OPTIONS. Press ENTER.
• Scroll down to SERVICE. Press ENTER.
• Click on LAMP TIMER RESET.
• Click on YES.

Green your projector

Looking for an even less expensive only try replacing the bare ASK LAMP-001 bulb instead of the entire lamp housing.

Watch our step-by-step video on replacing only the lamp.

The post Replacing the ASK C300 projector lamp appeared first on DLP Lamp Guide - LCD and DLP Repair Tips - Fix Your DLP - FixYourDLP.com.