Which projectors are compatible with the ASK LAMP-013 projector lamp

The ASK LAMP-013 projector lamp will run for approximately 1500 hours before needing to be replaced.   It’s critical to buy and install a genuine ASK LAMP-013 rather than a generic lamps. Although lower in price initially, these copy cat lamps usually end up costing much more in the long run. Billed as “compatible” these lamps are prone to explosion and you run the risk of being exposed to the carcinogenic substance Krypton-85 used in the making of these lamps.

Counterfeit generic lamp damage the sensitive components since copy cat manufacturers don’t have the  correct components or know-how to build a proper lamp. The light provided by these lamps is also substandard with poor illumination and can damage your eyesight.

Installing a generic lamp will also void any warranty for your ASK Proxima projectors. Go with an authentic ASK LAMP-013 OEM lamp sold by a dependable seller.  Learn the 7 Ways to spot a counterfeit lamp.

Buy this lamp on Amazon from the following authorized dealers:

Lutema Economy for Ask Proxima LAMP-013 TV Lamp (Bulb Only)
Lutema Platinum for Ask Proxima SP-LAMP-013 Projector Lamp (Original Philips Bulb)
Original Philips Projector Lamp Replacement for Ask Proxima LAMP-013 (Bulb Only)

Compatible Projectors

The ASK LAMP-013 is compatible with:

• ASK C2 Compact/C6 Compact
  
  ASK C1 Compact/C5 Compact
• ASK A6 Compact
• ASK Compact A4

For step-by-step instructions on replacing your ASK LAMP-013 projector lamp, click on your projector listed below:

ASK C2 Compact/ C6 Compact projector

Click here for step-by-step instructions on how to change the ASK LAMP-013 projector lamp for the ASK C2 Compact/C6 Compact projector.

ASK C1 Compact projector

Click here for step-by-step instructions on how to change the ASK LAMP-013 projector lamp for the ASK C1 Compact/C5 Compact projector.

ASK A6 Compact projector

Click here for step-by-step instructions on how to change the ASK LAMP-013 projector lamp for the ASK A6 Compact projector.

ASK Compact A4 projector

Click here for step-by-step instructions on how to change the ASK LAMP-013 projector lamp for the ASK Compact A4 projector.

The post When to replace the ASK LAMP-013 projector lamp appeared first on DLP Lamp Guide - LCD and DLP Repair Tips - Fix Your DLP - FixYourDLP.com.

ASK Compact A4 projector

Install a new ASK A4 Compact projector lamp in 3 easy steps

When it’s time ASK A4 Compact projector lamp a warning message will appear on screen and the ALARM indicator located on the right side of the projector will flash red.

STEP ONE: Buying the right lamp

It’s important to install a genuine ASK LAMP-013 lamp. Even though they are cheaper in price, avoid buying generic knock-offs or lamps advertised as “compatible.” These lamps are prone to explosion and have been created using toxic substances such as Krypton-85.

Using a counterfeit generic lamp will void any warranty for your ASK A4 Compact projector. A generic lamp can create poor illumination as well damaging the sensitive components in your projector. Knock-off lamps lack both the proper components and workmanship to ensure your projector is working at its peak.  Learn how to spot a counterfeit lamp.

Buy this lamp on Amazon from the following authorized dealers:

Lutema Economy for Ask Proxima LAMP-013 TV Lamp (Bulb Only)
Lutema Platinum for Ask Proxima SP-LAMP-013 Projector Lamp (Original Philips Bulb)
Original Philips Projector Lamp Replacement for Ask Proxima LAMP-013 (Bulb Only)

STEP TWO: Replacing the lamp

1. Disconnect the power cord before opening the ASK A4 Compact lamp lid. The projector should be cool to the touch before changing the lamp.

2. Press the snap lock and lift up to remove the ASK A4 Compact lamp lid. A safety switch will cut off power supply to the ASK LAMP-013 lamp completely.

3. Unscrew the two safety screws holding the ASK LAMP-013 lamp holder in place. Fold out the handle and pull out the old lamp holder. Be sure to dispose of the used ASK LAMP-013 lamp through a local recycling program. Recycle this lamp.

4. Inset the new lamp all the way into the ASK A4 Compact projector until it stops.

5. Fold the handle back in. Tighten the two screws that hold the ASK LAMP-013 lamp in place.

6. Snap the lamp lid on back the projector. You’re now ready to reset the lamp timer.

STEP THREE: Reset the lamp timer

To reset the lamp timer:

• Open the MENU system.
• Scroll down to OPTIONS. Press ENTER.
• Scroll down to SERVICE. Press ENTER.
• Click on LAMP TIMER RESET.
• Click on YES.

The system will now recognize the new lamp and begin counting the lamp life of the newly installed ASK LAMP-013 lamp.

The post 3 Steps to a new ASK A4 Compact projector lamp appeared first on DLP Lamp Guide - LCD and DLP Repair Tips - Fix Your DLP - FixYourDLP.com.