Epson ELPLP50 projector lamp – DLP Lamp Guide – LCD and DLP Repair Tips – Fix Your DLP – FixYourDLP.com

Replacement lamp for Epson EB-826WH projector

Shelagh McNally — Tue, 28 Apr 2015 06:40:00 +0000

Replace your Epson EB-826WH projector lamp in 3 easy steps.

Step 1: Invest in an OEM replacement lamp

Your Epson EB- 826WH needs an authentic lamp in order to work at it’s optimum levels. While buying counterfeit may seem like a bargain, their poor performance and poor quality actually make them more costly in the long run. Not only can they damage the sensitive electronics in your projector. counterfeits have a shorter lamp life and are prone to explosions. They can damage your eyesight as well as exposing you carcinogenic materials. Invest in an authentic Epson EB- 826WH projector lamp.

Find this lamp on Amazon sold by these authorized dealers:

Step 2: Watching for end of life

When the image gets dark or starts to deteriorate or when the projector lamp warning light starts flashing, followed by a Replace the lamp message on screen, it’s time to install a Epson ELPLP50 replacement projector lamp

Step 3: Installing the projector lamp replacement

After turning off the power button on the Epson EB-826WH projector off wait for the light to stop flashing.
Unplug the power cord.
Allow the Epson EB-826WH projector to cool down before replacing the projector lamp. It should be cool to the touch so you don’t run the risk of burning yourself.
Do not operate the projectors while any of the lamps are removed as this may result in malfunctions, fire hazard and other accidents.
The lamp cover is found on top of the Epson EB-826WH projector. Loosen the lamp cover screw — you can’t remove it only loosen it.
Slide the Epson EB-826WH projector lamp cover off.
Loosen the two screws holding the Epson ELPLP50 projector lamp in place.

Grab the Epson ELPLP50 projector lamp by the side indents. Gently pull the lamp out. Pulling too quickly can cause the bulb to shatter. Learn what to do should this happen. Caution: Don’t touch the actual bulb with your fingers since the oil from your skin can cause a black spot on the bulb.

NOTE: The Epson EL PLP50 projector lamp contains mercury and should not be thrown into regular garbage. Recycle your used lamps!

Gently insert the Epson ELPLP50 projector lamp making sure it’s facing the right way.

Tighten the screws on the new Epson ELPLP50 projector lamp. Be sure not to tighten too much or the lamp may not work.

Replace the lamp cover and tighten the screw on the EB-824H projector lamp cover.

Reset the Epson EB-824H projector lamp timer.

Reset the projector lamp timer

Reset the Epson EB-826WH projector Lamp Replacement Counter only when the Epson ELPLP50 projector lamp has been replaced.

Press the MENU button on the remote control. The Lamp Reset Menu will appear.
Scroll down to the RESET LAMP HOURS. Press ENTER.
A prompt appears asking if you want to RESET LAMP HOURS?
Select YES and press ENTER.
Press MENU to exit.

Prolong the life of the Epson ELPLP50 projector lamp:

Extend the life of the newly installed Epson ELPLP50 projector lamp with the following tips:

Keep your air filters clean to avoid overheating the projector.
Turn off the Epson EB-826WH projector and let it stand for at least one hour ever 24 hours. An average use of four to five hours per day will ensure longer lamp life.
Make sure there is enough airflow around the projector particularly if it’s been permanently mounted.
Learn more with Top tips for extending DLP projector lamp life.

The post Replacement lamp for Epson EB-826WH projector appeared first on DLP Lamp Guide - LCD and DLP Repair Tips - Fix Your DLP - FixYourDLP.com.

Epson EB-825W projector lamp replacement

Shelagh McNally — Fri, 10 Apr 2015 01:37:00 +0000

Replace the Epson EB-825W projector lamp using this handy guide.

End of life

Watch for these signs that signal it’s time to replace the Epson EB-825W projector lamp:

The projected image gets darker or starts to deteriorate.
The message Replace the lamp appears on the screen
The projector lamp warning starts flashing.

Invest in authentic

Keep Epson EB-825W projector keep working at its best levels by installing an authentic replacement projector lamp. Look for the seal of approval before buying your Epson EB-825W projector lamp. Generic lamps may appear to be a bargain die to their prices but athey can damage the sensitive electronics in your projector. Generic lamps have a shorter lamp life and are prone to explosions that can damage your projector beyond repair. Without the necessary protective guards in place they can damage your eyesight and expose you to toxic materials and carcinogenic materials. Learn how to protect yourself. Read the 7 Ways to Spot a Counterfeit Lamp.

Find this lamp on Amazon sold by these authorized dealers:

Installing the new projector lamp

The Epson EB-825W uses the Epson ELPLP50 projector lamp.

Before installation:

Turn power button off wait for light to stop flashing.
Turn off power switch on Epson EB-825W projector.
Unplug the power cord.
Before changing the projector lamp, allow the Epson EB-825W projector to cool down. It should be cool to the touch before you open it to change the projector lamp. Otherwise you run the risk of burning yourself.
Do not operate the projectors while any of the lamps are removed as this may result in malfunctions, fire hazard and other accidents.

Caution: Don’t touch the actual bulb with your fingers since the oil from your skin can cause a black spot on the bulb.

The lamp cover is found on top of the Epson EB-825W projector. Loosen the lamp cover screw — you can’t remove it only loosen it.

Slide the Epson EB-825W projector lamp cover off.

Loosen the two screws holding the Epson ELPLP50 projector lamp in place.

Grab the Epson ELPLP50 projector lamp by the side indents. Gently pull the lamp out. Pulling too quickly can cause the bulb to shatter. Learn what to do should this happen.

NOTE: The Epson ELPLP50 V13H010L50 projector lamp contains mercury and should not be thrown into regular garbage. Recycle your used lamps! If you bought from an authentic manufacturer they will recycle the lamp for you at no extra cost (another reason to buy authentic lamps).

Gently insert the Epson ELPLP50 projector lamp making sure it’s facing the right way.

Tighten the screws on the new Epson ELPLP50 projector lamp. Be sure not to tighten too much or the lamp may not work.

Replace the lamp cover and tighten the screw on the EB-825W projector lamp cover.

Reset the Epson EB-825W projector lamp timer.

Reset the projector lamp timer

Reset the Epson EB-825W projector Lamp Replacement Counter only when the Epson ELPLP50 projector lamp has been replaced.

Press the MENU button on the remote control. The Lamp Reset Menu will appear.
Scroll down to the RESET LAMP HOURS. Press ENTER.
A prompt appears asking if you want to RESET LAMP HOURS?
Select YES and press ENTER.
Press MENU to exit.

Prolong the life of the Epson ELPLP50 projector lamp:

Extend the life of the newly installed Epson ELPLP50 projector lamp with the following tips:

Keep your air filters clean to avoid overheating the projector.
Turn off the Epson EB-825W projector and let it stand for at least one hour ever 24 hours. An average use of four to five hours per day will ensure longer lamp life.
Make sure there is enough airflow around the projector particularly if it’s been permanently mounted.
Learn more with Top tips for extending DLP projector lamp life.

The post Epson EB-825W projector lamp replacement appeared first on DLP Lamp Guide - LCD and DLP Repair Tips - Fix Your DLP - FixYourDLP.com.

How to replace the Epson EB-824H projector lamp

Shelagh McNally — Tue, 13 Jan 2015 20:05:00 +0000

This guide shows you how to install a replacement Epson EB-824H projector projector lamp.

Why buy OEM replacement lamps?

Your Epson EB- 824H uses the Epson ELPLP50 projector lamp. An authentic OEM replacement projector lamp makes all the difference in how your Epson EB-824H projector performs. Generics just can’t offer the same performance and damage the sensitive electronics in your projector. Look for the seal of approval before buying your OEM Epson EB-824H projector lamp. Generic lamps have a shorter lamp life and are prone to explosions. Without the necessary protective guards in place generics can damage your eyesight as well as exposing you carcinogenic materials. Learm how to protect yourself. Read the 7 Ways to Spot a Counterfeit Lamp.

Find this lamp on Amazon sold by these authorized dealers:

Watching for end of life

It is time to replace the Epson EB-824H projector lamp when the following signs are seen:

The projected image gets darker or starts to deteriorate.
The message Replace the lamp appears on the screen
The projector lamp warning starts flashing.

Installing the Projector Lamp Replacement

Before installation:

Turn power button off wait for light to stop flashing.
Turn off power switch on Epson EB-824H projector.
Unplug the power cord.
Before changing the projector lamp, allow the Epson EB-824H projector to cool down. It should be cool to the touch before you open it to change the projector lamp. Otherwise you run the risk of burning yourself.
Do not operate the projectors while any of the lamps are removed as this may result in malfunctions, fire hazard and other accidents.

Caution: Don’t touch the actual bulb with your fingers since the oil from your skin can cause a black spot on the bulb.

The lamp cover is found on top of the Epson EB-824H projector. Loosen the lamp cover screw — you can’t remove it only loosen it.

Slide the Epson EB-824H projector lamp cover off.

Loosen the two screws holding the Epson ELPLP50 projector lamp in place.

Grab the Epson ELPLP50 projector lamp by the side indents. Gently pull the lamp out. Pulling too quickly can cause the bulb to shatter. Learn what to do should this happen.

NOTE: The Epson ELPLP50 projector lamp contains mercury and should not be thrown into regular garbage. Recycle your used lamps! If you bought from an authentic manufacturer they will recycle the lamp for you at no extra cost (another reason to buy authentic lamps).

Gently insert the Epson ELPLP50 projector lamp making sure it’s facing the right way.

Tighten the screws on the new Epson ELPLP50 projector lamp. Be sure not to tighten too much or the lamp may not work.

Replace the lamp cover and tighten the screw on the EB-824H projector lamp cover.

Reset the Epson EB-824H projector lamp timer.

Reset the projector lamp timer

Reset the Epson EB-824H projector Lamp Replacement Counter only when the Epson ELPLP50 projector lamp has been replaced.

Press the MENU button on the remote control. The Lamp Reset Menu will appear.
Scroll down to the RESET LAMP HOURS. Press ENTER.
A prompt appears asking if you want to RESET LAMP HOURS?
Select YES and press ENTER.
Press MENU to exit.

Prolong the life of the Epson ELPLP50 projector lamp:

Extend the life of the newly installed Epson ELPLP50 projector lamp with the following tips:

Keep your air filters clean to avoid overheating the projector.
Turn off the Epson EB-824H projector and let it stand for at least one hour ever 24 hours. An average use of four to five hours per day will ensure longer lamp life.
Make sure there is enough airflow around the projector particularly if it’s been permanently mounted.
Learn more with Top tips for extending DLP projector lamp life.

The post How to replace the Epson EB-824H projector lamp appeared first on DLP Lamp Guide - LCD and DLP Repair Tips - Fix Your DLP - FixYourDLP.com.

Installing an Epson PowerLite 825+ projector lamp replacement

Shelagh McNally — Wed, 07 Jan 2015 05:10:00 +0000

Follow this step-by-step guide to install a replacement Epson PowerLite 825+ projector lamp.

Know when to replace

Watch for the following signs indicating it’s time for you to install an Epson PowerLite 825+ projector:

The projected image gets darker or starts to deteriorate.
The message Replace the lamp appears on the screen and the warning light flashes orange.
If the warning light is flashing red then the projector lamp has burnt out and the projector will shut down. Replace the lamp immediately!

Invest in authentic replacements

Keep your Epson PowerLite 825+ working at its best optimum levels and purchase OEM authentic projector lamps. You’ll recognize them by their seal of approval. The bargain prices for generic lamps can be tempting but in the end they cause more problems then they are worth.

Reasons to avoid to generics:

generics can damage the sensitive electronics in your projector.
they have a shorter lamp life
often prone to explosions
generics are missing protective guards and can damage your eyesight
are created with a carcinogenic materials

Protect yourself from buying counterfeit lamps. Read the 7 Ways to Spot a Counterfeit Lamp.

Find this lamp on Amazon sold by these authorized dealers:

Installing the replacement projector lamp

The Epson PowerLite 825+ uses the Epson ELPLP50 V13H010L50 projector lamp.

Before installation:

Turn power button off wait for light to stop flashing.
Turn off power switch on Epson PowerLite 825+ projector.
Unplug the power cord.
Before changing the projector lamp, allow the Epson PowerLite 825+ projector to cool down. It should be cool to the touch before you open it to change the projector lamp. Otherwise you run the risk of burning yourself.
Do not operate the projectors while any of the lamps are removed as this may result in malfunctions, fire hazard and other accidents.

Caution: Don’t touch the actual bulb with your fingers since the oil from your skin can cause a black spot on the bulb.

The lamp cover is found on top of the Epson PowerLite 825+ projector. Loosen the lamp cover screw — you can’t remove it only loosen it.

Slide the projector lamp cover off.

Loosen the two screws holding the Epson ELPLP50 V13H010L50 projector lamp in place.

Grab the Epson ELPLP50 projector lamp by the side indents. Gently pull the lamp out. Pulling too quickly can cause the bulb to shatter. Learn what to do should this happen.

NOTE: The Epson ELPLP50 V13H010L50 projector lamp contains mercury and should not be thrown into regular garbage. Recycle your used lamps!

Gently insert the Epson ELPLP50 projector lamp making sure it’s facing the right way. Push down on the side marked PUSH until it snaps into place. Tighten the screws on the new Epson ELPLP50 projector lamp. Be sure not to tighten too much or the lamp may not work.

Replace the lamp cover and tighten the screw on the Epson PowerLite 825+ projector lamp cover. You are now ready to reset the projector lamp timer.

Reset the projector lamp timer

Reset the Epson PowerLite 825+ projector Lamp Replacement Counter only when the Epson ELPLP50 projector lamp has been replaced.

Press the MENU button on the remote control. The Lamp Reset Menu will appear.
Scroll down to the RESET LAMP HOURS. Press ENTER.
A prompt appears asking if you want to RESET LAMP HOURS?
Select YES and press ENTER.
Press MENU to exit.

Prolong the life of the Epson ELPLP50 projector lamp:

Extend the life of the newly installed Epson ELPLP50 projector lamp with the following tips:

Keep your air filters clean to avoid overheating the projector.
Turn off the Epson PowerLite 825+ projector and let it stand for at least one hour ever 24 hours. An average use of four to five hours per day will ensure longer lamp life.
Make sure there is enough airflow around the projector particularly if it’s been permanently mounted.
Learn more with Top tips for extending DLP projector lamp life.

The post Installing an Epson PowerLite 825+ projector lamp replacement appeared first on DLP Lamp Guide - LCD and DLP Repair Tips - Fix Your DLP - FixYourDLP.com.

Replacing the Epson EB-825 projector lamp

Shelagh McNally — Tue, 30 Dec 2014 07:56:00 +0000

Keep reading for a step-by-step guide on how to replace the Epson EB-825 projector lamp.

Go with authentic

An authentic projector lamp makes all the difference in how your Epson EB-825 projector performs. Generics just can’t offer the same performance or value. Look for the seal of approval before buying your Epson EB-825 projector lamp. Generic lamps have a number of problems:

shorter lamp life
prone to explosions
damage your eyesight
expose you to toxic materials and carcinogenic materials
damage the sensitive electronics in your projector

Avoid getting fooled into buying generic lamps posing as the real deal. Learn how to protect yourself. Read the 7 Ways to Spot a Counterfeit Lamp.

Find this lamp on Amazon sold by these authorized dealers:

End of life warnings

It is time to replace the Epson EB-825 projector lamp when the following signs are seen:

The projected image gets darker or starts to deteriorate.
The message Replace the lamp appears on the screen
The projector lamp warning starts flashing.

Installing the newProjector Lamp

The Epson EB-825 uses the Epson ELPLP50rojector lamp.

Before installation:

Turn power button off wait for light to stop flashing.
Turn off power switch on Epson EB-825 projector.
Unplug the power cord.
Before changing the projector lamp, allow the Epson EB-825 projector to cool down. It should be cool to the touch before you open it to change the projector lamp. Otherwise you run the risk of burning yourself.
Do not operate the projectors while any of the lamps are removed as this may result in malfunctions, fire hazard and other accidents.

Caution: Don’t touch the actual bulb with your fingers since the oil from your skin can cause a black spot on the bulb.

The lamp cover is found on top of the Epson EB-825 projector. Loosen the lamp cover screw — you can’t remove it only loosen it.

Slide the Epson EB-825 projector lamp cover off.

Loosen the two screws holding the Epson ELPLP50 projector lamp in place.

Grab the Epson ELPLP50 projector lamp by the side indents. Gently pull the lamp out. Pulling too quickly can cause the bulb to shatter. Learn what to do should this happen.

Gently insert the Epson ELPLP50 projector lamp making sure it’s facing the right way.

Tighten the screws on the new Epson ELPLP50 projector lamp. Be sure not to tighten too much or the lamp may not work.

Replace the lamp cover and tighten the screw on the EB-825 projector lamp cover.

Reset the Epson EB-825 projector lamp timer.

Reset the projector lamp timer

Reset the Epson EB-825 projector Lamp Replacement Counter only when the Epson ELPLP50 projector lamp has been replaced.

Press the MENU button on the remote control. The Lamp Reset Menu will appear.
Scroll down to the RESET LAMP HOURS. Press ENTER.
A prompt appears asking if you want to RESET LAMP HOURS?
Select YES and press ENTER.
Press MENU to exit.

Prolong the life of the Epson ELPLP50 projector lamp:

Extend the life of the newly installed Epson ELPLP50 projector lamp with the following tips:

Keep your air filters clean to avoid overheating the projector.
Turn off the Epson EB-825 projector and let it stand for at least one hour ever 24 hours. An average use of four to five hours per day will ensure longer lamp life.
Make sure there is enough airflow around the projector particularly if it’s been permanently mounted.
Learn more with Top tips for extending DLP projector lamp life

The post Replacing the Epson EB-825 projector lamp appeared first on DLP Lamp Guide - LCD and DLP Repair Tips - Fix Your DLP - FixYourDLP.com.

Guide for installing the Epson EB-826 projector lamp

Shelagh McNally — Fri, 12 Dec 2014 22:12:00 +0000

We show you how to replace the Epson EB-826 projector lamp using this step-by step guide.

The importance of authentic projector lamps

An authentic projector lamp makes all the difference in how your Epson EB-826 projector performs. Generics just can’t offer the same performance or value. Look for the seal of approval before buying your Epson EB-824 projector lamp. Avoid getting fooled into buying generic lamps posing as the real deal. Learm how to protect yourself. Read the 7 Ways to Spot a Counterfeit Lamp.

Reasons to avoid generic:

shorter lamp life
prone to explosions
damage your eyesight
exposure to carcinogenic materials
damage the sensitive electronics in your projector.

Find this lamp on Amazon sold by these authorized dealers:

Watching for end of life

It is time to replace the Epson EB-826 projector lamp when the following signs are seen:

The projected image gets darker or starts to deteriorate.
The message Replace the lamp appears on the screen
The projector lamp warning starts flashing.

Installing the Projector Lamp Replacement

The Epson EB- 826 uses the Epson ELPLP50 projector lamp.

Before installation:

Turn power button off wait for light to stop flashing.
Turn off power switch on Epson EB-826 projector.
Unplug the power cord.
Before changing the projector lamp, allow the Epson EB-826 projector to cool down. It should be cool to the touch before you open it to change the projector lamp. Otherwise you run the risk of burning yourself.
Do not operate the projectors while any of the lamps are removed as this may result in malfunctions, fire hazard and other accidents.

Caution: Don’t touch the actual bulb with your fingers since the oil from your skin can cause a black spot on the bulb.

The lamp cover is found on top of the Epson EB-826 projector. Loosen the lamp cover screw — you can’t remove it only loosen it.

Slide the Epson EB-826 projector lamp cover off.

Loosen the two screws holding the Epson ELPLP50 projector lamp in place.

Grab the Epson ELPLP50 projector lamp by the side indents. Gently pull the lamp out. Pulling too quickly can cause the bulb to shatter. Learn what to do should this happen.

Gently insert the Epson ELPLP50 projector lamp making sure it’s facing the right way.

Tighten the screws on the new Epson ELPLP50 projector lamp. Be sure not to tighten too much or the lamp may not work.

Replace the lamp cover and tighten the screw on the EB-826 projector lamp cover.

Reset the Epson EB-826 projector lamp timer.

Reset the projector lamp timer

Reset the Epson EB-826 projector Lamp Replacement Counter only when the Epson ELPLP50 projector lamp has been replaced.

Press the MENU button on the remote control. The Lamp Reset Menu will appear.
Scroll down to the RESET LAMP HOURS. Press ENTER.
A prompt appears asking if you want to RESET LAMP HOURS?
Select YES and press ENTER.
Press MENU to exit.

Prolong the life of the Epson ELPLP50 projector lamp:

Extend the life of the newly installed Epson ELPLP50 projector lamp with the following tips:

Keep your air filters clean to avoid overheating the projector.
Turn off the Epson EB-826 projector and let it stand for at least one hour ever 24 hours. An average use of four to five hours per day will ensure longer lamp life.
Make sure there is enough airflow around the projector particularly if it’s been permanently mounted.
Learn more with Top tips for extending DLP projector lamp life

The post Guide for installing the Epson EB-826 projector lamp appeared first on DLP Lamp Guide - LCD and DLP Repair Tips - Fix Your DLP - FixYourDLP.com.

3 steps to a new Epson EB-826W projector lamp

Shelagh McNally — Wed, 26 Nov 2014 18:30:00 +0000

This guide will show you how to replace the Epson EB-826W projector lamp in three easy steps.

Step 1: Watching for end of life

It is time to replace the Epson EB-826W projector lamp when the following signs are seen:

The projected image gets darker or starts to deteriorate.
The message Replace the lamp appears on the screen
The projector lamp warning starts flashing.

Step 2: Buy authentic Epson EB-826W projector lamp

Your Epson EB-826W projector needs an authentic projector lamp in order to keep working at its best levels. Look for the seal of approval before buying your Epson EB-826W projector lamp. Avoid generic lamps and don’t be tempted by their bargain prices– they can damage the sensitive electronics in your projector. Generic lamps have a shorter lamp life and are prone to explosions. Without the necessary protective guards in place they can damage your eyesight and expose you to toxic materials and carcinogenic materials. Learn how to protect yourself. Read the 7 Ways to Spot a Counterfeit Lamp.

Find this lamp on Amazon sold by these authorized dealers:

Step 3: Installing the Epson EB-826W projector lamp

The Epson EB-826W uses the Epson ELPLP50 V13H010L50 projector lamp.

Before installation:

Turn power button off wait for light to stop flashing.
Turn off power switch on Epson EB-826W projector.
Unplug the power cord.
Before changing the projector lamp, allow the Epson EB-826W projector to cool down. It should be cool to the touch before you open it to change the projector lamp. Otherwise you run the risk of burning yourself.
Do not operate the projectors while any of the lamps are removed as this may result in malfunctions, fire hazard and other accidents.

Caution: Don’t touch the actual bulb with your fingers since the oil from your skin can cause a black spot on the bulb.

The lamp cover is found on top of the Epson EB-826W projector. Loosen the lamp cover screw — you can’t remove it only loosen it.

Slide the Epson EB-826W projector lamp cover off.

Loosen the two screws holding the Epson ELPLP50 V13H010L50 projector lamp in place.

Grab the Epson ELPLP50 projector lamp by the side indents. Gently pull the lamp out. Pulling too quickly can cause the bulb to shatter. Learn what to do should this happen.

Gently insert the Epson ELPLP50 projector lamp making sure it’s facing the right way.

Tighten the screws on the new Epson ELPLP50 projector lamp. Be sure not to tighten too much or the lamp may not work.

Replace the lamp cover and tighten the screw on the EB-826W projector lamp cover.

Reset the Epson EB-826W projector lamp timer.

Reset the projector lamp timer

Reset the Epson EB-826W projector Lamp Replacement Counter only when the Epson ELPLP50 projector lamp has been replaced.

Press the MENU button on the remote control. The Lamp Reset Menu will appear.
Scroll down to the RESET LAMP HOURS. Press ENTER.
A prompt appears asking if you want to RESET LAMP HOURS?
Select YES and press ENTER.
Press MENU to exit.

Prolong the life of the Epson ELPLP50 projector lamp:

Extend the life of the newly installed Epson ELPLP50 projector lamp with the following tips:

Keep your air filters clean to avoid overheating the projector.
Turn off the Epson EB-826W projector and let it stand for at least one hour ever 24 hours. An average use of four to five hours per day will ensure longer lamp life.
Make sure there is enough airflow around the projector particularly if it’s been permanently mounted.
Learn more with Top tips for extending DLP projector lamp life.

The post 3 steps to a new Epson EB-826W projector lamp appeared first on DLP Lamp Guide - LCD and DLP Repair Tips - Fix Your DLP - FixYourDLP.com.

Changing the Epson EB-824 projector lamp

Shelagh McNally — Tue, 25 Nov 2014 06:43:00 +0000

Wondering when and how to replace the Epson EB-824 projector lamp? We’ll show you how! Keep reading.

Watching for end of life

It is time to replace the Epson EB-824 projector lamp when the following signs are seen:

The projected image gets darker or starts to deteriorate.
The message Replace the lamp appears on the screen
The projector lamp warning starts flashing.

The importance of authentic projector lamps

An authentic projector lamp makes all the difference in how your Epson EB-824 projector performs. Generics just can’t offer the same performance or value. Look for the seal of approval before buying your Epson EB-824 projector lamp. Generic lamps have a shorter lamp life and are prone to explosions. Without the necessary protective guards in place generics can damage your eyesight as well as exposing you to toxic materials and carcinogenic materials. Installing them can damage the sensitive electronics in your projector.

Avoid getting fooled into buying generic lamps posing as the real deal. Learm how to protect yourself. Read the 7 Ways to Spot a Counterfeit Lamp.

Find this lamp on Amazon sold by these authorized dealers:

Installing the Projector Lamp Replacement

The Epson EB- 824 uses the Epson ELPLP50 V13H010L50 projector lamp.

Before installation:

Turn power button off wait for light to stop flashing.
Turn off power switch on Epson EB-824 projector.
Unplug the power cord.
Before changing the projector lamp, allow the Epson EB-824 projector to cool down. It should be cool to the touch before you open it to change the projector lamp. Otherwise you run the risk of burning yourself.
Do not operate the projectors while any of the lamps are removed as this may result in malfunctions, fire hazard and other accidents.

Caution: Don’t touch the actual bulb with your fingers since the oil from your skin can cause a black spot on the bulb.

The lamp cover is found on top of the Epson EB-824 projector. Loosen the lamp cover screw — you can’t remove it only loosen it.

Slide the Epson EB-824 projector lamp cover off.

Loosen the two screws holding the Epson ELPLP50 V13H010L50 projector lamp in place.

Grab the Epson ELPLP50 projector lamp by the side indents. Gently pull the lamp out. Pulling too quickly can cause the bulb to shatter. Learn what to do should this happen.

Gently insert the Epson ELPLP50 projector lamp making sure it’s facing the right way.

Tighten the screws on the new Epson ELPLP50 projector lamp. Be sure not to tighten too much or the lamp may not work.

Replace the lamp cover and tighten the screw on the EB-824 projector lamp cover.

Reset the Epson EB-824 projector lamp timer.

Reset the projector lamp timer

Reset the Epson EB-824 projector Lamp Replacement Counter only when the Epson ELPLP50 projector lamp has been replaced.

Press the MENU button on the remote control. The Lamp Reset Menu will appear.
Scroll down to the RESET LAMP HOURS. Press ENTER.
A prompt appears asking if you want to RESET LAMP HOURS?
Select YES and press ENTER.
Press MENU to exit.

Prolong the life of the Epson ELPLP50 projector lamp:

Extend the life of the newly installed Epson ELPLP50 projector lamp with the following tips:

Keep your air filters clean to avoid overheating the projector.
Turn off the Epson EB-824 projector and let it stand for at least one hour ever 24 hours. An average use of four to five hours per day will ensure longer lamp life.
Make sure there is enough airflow around the projector particularly if it’s been permanently mounted.
Learn more with Top tips for extending DLP projector lamp life

The post Changing the Epson EB-824 projector lamp appeared first on DLP Lamp Guide - LCD and DLP Repair Tips - Fix Your DLP - FixYourDLP.com.

Replace the Epson PowerLite 85 projector lamp

Shelagh McNally — Thu, 20 Nov 2014 04:50:00 +0000

When it’s time to install a new Epson PowerLite 85 projector lamp, this guide can help.

Note: These instructions can also be used for the Epson PowerLite 85+ projector.

Authentic projector lamps are critical

The Epson PowerLite 85 projector needs a proper projector lamp that works in harmony with its sophisticated optics. Only an authorized OEM dealer can provide these lamps. Knock-off generics, sold at discount prices, simply can’t offer the same performance — they don’t have the correct parts and haven’t been calibrated. Look for the seal of approval before buying your Epson PowerLite 85 projector lamp.

6 reasons to buy authentic:

generice have a shorter lamp life and actually cost you more money in the long run
knockoff lamps are created with toxic materials and carcinogenic parts
genreica prone to explosions
knockoffs damage the sensitive electronics in your projectors
generic lamp manufacturers have not installed any safeguards to protect your eyesight
no guarantee or refunds offered.

Learn the 7 Ways to Spot a Counterfeit Lamp.

Find this lamp on Amazon sold by these authorized dealers:

When to replace

If Power Consumption is set to normal, you can expect approximately 5000 hours of Epson PowerLite 85 projector lamp lamp life. (Extend that time to 6000 hours by using the ECO Mode setting). When it’s time to replace the Epson PowerLite 85 projector lamp, you’ll see the following end of life signs:

projected image gets darker or starts to deteriorate.
a message Replace the lamp appears on the screen
Epson Powerlite 85 projector lamp warning light flashes orange.
projector lamp is burnt out and must be replaced immediately when the lamp warning light flashes red.

Installing the Projector Lamp Replacement

The Epson Powerlite 85 uses the Epson ELPLP50 V13H010L50 projector lamp replacement. Before installating the new projector lamp followe these important safety procedures:

Turn power button off wait for light to stop flashing.
Turn off power switch on Epson PowerLite 85 projector.
Unplug the power cord.
Allow the Epson PowerLite 85 projector to cool for one hour – it should be cool to the touch. These projectors run a high temperatures so you can burn yourself badly if the projector has not cooled enough before being opened up.
Do not operate the projectors while any of the lamps are removed as this may result in malfunctions, fire hazard and other accidents.

The lamp cover is found on top of the Epson PowerLite 85 projector. Loosen the lamp cover screw — you can’t remove it only loosen it.

Slide the Epson PowerLite 85 projector lamp cover off.

Loosen the two screws holding the Epson ELPLP50 V13H010L50 projector lamp in place.

Grab the Epson ELPLP50 projector amp by side indents. Gently pull the lamp out. Pulling too quickly can cause the bulb to shatter. Learn what to do should this happen.

Gently insert the Epson ELPLP50 projector lamp making sure it’s facing the right way. Caution: Don’t touch the screen or the actual bulb with your finger since the oil from your skin can cause a black spot on the bulb.

Tighten the screws on the new Epson ELPLP50 projector lamp. Be sure not to tighten too much or the lamp may not work.

Replace the lamp cover and tighten the screw on the PowerLite 85 projector lamp cover. You’re ready to reset the Epson PowerLite 85 projector lamp timer.

Reset the projector lamp timer

Reset the Epson PowerLite 85 projector Lamp Replacement Counter only when the Epson ELPLP50 projector lamp has been replaced.

Press the MENU button on the remote control. The Lamp Reset Menu will appear.
Scroll down to the RESET LAMP HOURS. Press ENTER.
A prompt appears asking if you want to RESET LAMP HOURS?
Select YES and press ENTER.
Press MENU to exit.

Prolong the life of the Epson ELPLP50 projector lamp:

Extend the life of the newly installed Epson ELPLP50 projector lamp by:

Keeping your air filters clean to avoid overheating the projector.
Turning off the Epson PowerLite 85 projector and letting it rest at least one hour ever 24 hours. An average use of four to five hours per day will ensure longer lamp life.
Make sure there is enough airflow around the projector particularly if it’s been permanently mounted.
Learn more with Top tips for extending DLP projector lamp life.

The post Replace the Epson PowerLite 85 projector lamp appeared first on DLP Lamp Guide - LCD and DLP Repair Tips - Fix Your DLP - FixYourDLP.com.

Replacing the Epson PowerLite 84 projector lamp

Shelagh McNally — Wed, 12 Nov 2014 01:41:00 +0000

This guide shows you how to install a new Epson PowerLite 84 projector lamp.

Note: These instructions can also be used for the Epson PowerLite 84+ projector.

When to replace

If Power Consumption is set to normal, you can expect approximately 5000 hours of Epson PowerLite 84 projector lamp lamp life. (Extend that time to 6000 hours by using the ECO Mode setting). When it’s time to replace the Epson PowerLite 84 projector lamp, you’ll see the following end of life signs:

projected image gets darker or starts to deteriorate.
a message Replace the lamp appears on the screen
Epson Powerlite 84 projector lamp warning light flashes orange.
projector lamp is burnt out and must be replaced immediately when the lamp warning light flashes red.

Authentic projector lamps are critical

Your Epson PowerLite 84 projector is a complicated machine with high-end optics. It needs a properly calibrated projector lamp in order to keep working at its best. Only an authorized OEM dealer can provide these lamps. Knock-off generics, sold at discount prices, simply can’t offer the same performance — they don’t have the correct parts and haven’t been calibrated. Look for the seal of approval before buying your Epson PowerLite 84 projector lamp.

6 reasons to buy authentic:

generice have a shorter lamp life and actually cost you more money in the long run
knockoff lamps are created with toxic materials and carcinogenic parts
genreica prone to explosions
knockoffs damage the sensitive electronics in your projectors
generic lamp manufacturers have not installed any safeguards to protect your eyesight
no guarantee or refunds offered.

Learm how to protect yourself with 7 Ways to Spot a Counterfeit Lamp.

Find this lamp on Amazon sold by these authorized dealers:

Installing the Projector Lamp Replacement

The Epson Powerlite 84 uses the Epson ELPLP50 V13H010L50 projector lamp replacement. Before installating the new projector lamp followe these important safety procedures:

Turn power button off wait for light to stop flashing.
Turn off power switch on Epson PowerLite 84 projector.
Unplug the power cord.
Allow the Epson PowerLite 84 projector to cool for one hour – it should be cool to the touch. These projectors run a high temperatures so you can burn yourself badly if the projector has not cooled enough before being opened up.
Do not operate the projectors while any of the lamps are removed as this may result in malfunctions, fire hazard and other accidents.

The lamp cover is found on top of the Epson PowerLite 84 projector. Loosen the lamp cover screw — you can’t remove it only loosen it.

Slide the Epson PowerLite 826W projector lamp cover off.

Loosen the two screws holding the Epson ELPLP50 V13H010L50 projector lamp in place.

Grab the Epson ELPLP50 projector amp by side indents. Gently pull the lamp out. Pulling too quickly can cause the bulb to shatter. Learn what to do should this happen.

Tighten the screws on the new Epson ELPLP50 projector lamp. Be sure not to tighten too much or the lamp may not work.

Replace the lamp cover and tighten the screw on the PowerLite 84 projector lamp cover. You’re ready to reset the Epson PowerLite 84 projector lamp timer.

Reset the projector lamp timer

Reset the Epson PowerLite 84 projector Lamp Replacement Counter only when the Epson ELPLP50 projector lamp has been replaced.

Press the MENU button on the remote control. The Lamp Reset Menu will appear.
Scroll down to the RESET LAMP HOURS. Press ENTER.
A prompt appears asking if you want to RESET LAMP HOURS?
Select YES and press ENTER.
Press MENU to exit.

Prolong the life of the Epson ELPLP50 projector lamp:

Extend the life of the newly installed Epson ELPLP50 projector lamp by:

Keeping your air filters clean to avoid overheating the projector.
Turning off the Epson PowerLite 84 projector and letting it rest at least one hour ever 24 hours. An average use of four to five hours per day will ensure longer lamp life.
Make sure there is enough airflow around the projector particularly if it’s been permanently mounted.
Learn more with Top tips for extending DLP projector lamp life.

The post Replacing the Epson PowerLite 84 projector lamp appeared first on DLP Lamp Guide - LCD and DLP Repair Tips - Fix Your DLP - FixYourDLP.com.