Epson ELPLP50 V13H010L50 projector lamp – DLP Lamp Guide – LCD and DLP Repair Tips – Fix Your DLP – FixYourDLP.com

Replacement lamp for Epson EB-826WH projector

Shelagh McNally — Tue, 28 Apr 2015 06:40:00 +0000

Replace your Epson EB-826WH projector lamp in 3 easy steps.

Step 1: Invest in an OEM replacement lamp

Your Epson EB- 826WH needs an authentic lamp in order to work at it’s optimum levels. While buying counterfeit may seem like a bargain, their poor performance and poor quality actually make them more costly in the long run. Not only can they damage the sensitive electronics in your projector. counterfeits have a shorter lamp life and are prone to explosions. They can damage your eyesight as well as exposing you carcinogenic materials. Invest in an authentic Epson EB- 826WH projector lamp.

Find this lamp on Amazon sold by these authorized dealers:

Step 2: Watching for end of life

When the image gets dark or starts to deteriorate or when the projector lamp warning light starts flashing, followed by a Replace the lamp message on screen, it’s time to install a Epson ELPLP50 replacement projector lamp

Step 3: Installing the projector lamp replacement

After turning off the power button on the Epson EB-826WH projector off wait for the light to stop flashing.
Unplug the power cord.
Allow the Epson EB-826WH projector to cool down before replacing the projector lamp. It should be cool to the touch so you don’t run the risk of burning yourself.
Do not operate the projectors while any of the lamps are removed as this may result in malfunctions, fire hazard and other accidents.
The lamp cover is found on top of the Epson EB-826WH projector. Loosen the lamp cover screw — you can’t remove it only loosen it.
Slide the Epson EB-826WH projector lamp cover off.
Loosen the two screws holding the Epson ELPLP50 projector lamp in place.

Grab the Epson ELPLP50 projector lamp by the side indents. Gently pull the lamp out. Pulling too quickly can cause the bulb to shatter. Learn what to do should this happen. Caution: Don’t touch the actual bulb with your fingers since the oil from your skin can cause a black spot on the bulb.

NOTE: The Epson EL PLP50 projector lamp contains mercury and should not be thrown into regular garbage. Recycle your used lamps!

Gently insert the Epson ELPLP50 projector lamp making sure it’s facing the right way.

Tighten the screws on the new Epson ELPLP50 projector lamp. Be sure not to tighten too much or the lamp may not work.

Replace the lamp cover and tighten the screw on the EB-824H projector lamp cover.

Reset the Epson EB-824H projector lamp timer.

Reset the projector lamp timer

Reset the Epson EB-826WH projector Lamp Replacement Counter only when the Epson ELPLP50 projector lamp has been replaced.

Press the MENU button on the remote control. The Lamp Reset Menu will appear.
Scroll down to the RESET LAMP HOURS. Press ENTER.
A prompt appears asking if you want to RESET LAMP HOURS?
Select YES and press ENTER.
Press MENU to exit.

Prolong the life of the Epson ELPLP50 projector lamp:

Extend the life of the newly installed Epson ELPLP50 projector lamp with the following tips:

Keep your air filters clean to avoid overheating the projector.
Turn off the Epson EB-826WH projector and let it stand for at least one hour ever 24 hours. An average use of four to five hours per day will ensure longer lamp life.
Make sure there is enough airflow around the projector particularly if it’s been permanently mounted.
Learn more with Top tips for extending DLP projector lamp life.

The post Replacement lamp for Epson EB-826WH projector appeared first on DLP Lamp Guide - LCD and DLP Repair Tips - Fix Your DLP - FixYourDLP.com.

Swap your old Epson EB-85 projector lamp for new

Shelagh McNally — Tue, 02 Dec 2014 00:44:10 +0000

This guide shows you how to replace your old Epson EB-85 projector lamp for new for a new one.

Invest in authentic

Keep your Epson EB-85 working at its optimum level by only installing an authentic projector lamp. It will make all the difference in how your projector performs. Generic lamps have a shorter lamp life and are prone to explosions. Without the necessary protective guards in place generics can damage your eyesight as well as exposing you to toxic materials and carcinogenic materials. Installing them can damage the sensitive electronics in your projector. Look for the seal of approval before buying your Epson EB-824 projector lamp. Read the 7 Ways to Spot a Counterfeit Lamp.

Find this lamp on Amazon sold by these authorized dealers:

Watching for end of life

It is time to replace the Epson EB-85 projector lamp when the following signs are seen:

The projected image gets darker or starts to deteriorate.
The message Replace the lamp appears on the screen
The projector lamp warning starts flashing.

Installing the Projector Lamp Replacement

The Epson EB- 85 uses the Epson ELPLP50 projector lamp.

Before installation:

Turn power button off wait for light to stop flashing.
Turn off power switch on Epson EB-85 projector.
Unplug the power cord.
Before changing the projector lamp, allow the Epson EB-85 projector to cool down. It should be cool to the touch before you open it to change the projector lamp. Otherwise you run the risk of burning yourself.
Do not operate the projectors while any of the lamps are removed as this may result in malfunctions, fire hazard and other accidents.

Caution: Don’t touch the actual bulb with your fingers since the oil from your skin can cause a black spot on the bulb.

The lamp cover is found on top of the Epson EB-85 projector. Loosen the lamp cover screw — you can’t remove it only loosen it.

Slide the Epson EB-85 projector lamp cover off.

Loosen the two screws holding the Epson ELPLP50 projector lamp in place.

Grab the Epson ELPLP50 projector lamp by the side indents. Gently pull the lamp out. Pulling too quickly can cause the bulb to shatter. Learn what to do should this happen.

NOTE: The Epson ELPLP50 projector lamp contains mercury and should not be thrown into regular garbage. Recycle your used lamps! If you bought from an authentic manufacturer they will recycle the lamp for you at no extra cost (another reason to buy authentic lamps).

Gently insert the Epson ELPLP50 projector lamp making sure it’s facing the right way.

Tighten the screws on the new Epson ELPLP50 projector lamp. Be sure not to tighten too much or the lamp may not work.

Replace the lamp cover and tighten the screw on the EB-85 projector lamp cover.

Reset the Epson EB-85 projector lamp timer.

Reset the projector lamp timer

Reset the Epson EB-85 projector Lamp Replacement Counter only when the Epson ELPLP50 projector lamp has been replaced.

Press the MENU button on the remote control. The Lamp Reset Menu will appear.
Scroll down to the RESET LAMP HOURS. Press ENTER.
A prompt appears asking if you want to RESET LAMP HOURS?
Select YES and press ENTER.
Press MENU to exit.

Prolong the life of the Epson ELPLP50 projector lamp:

Extend the life of the newly installed Epson ELPLP50 projector lamp with the following tips:

Keep your air filters clean to avoid overheating the projector.
Turn off the Epson EB-85 projector and let it stand for at least one hour ever 24 hours. An average use of four to five hours per day will ensure longer lamp life.
Make sure there is enough airflow around the projector particularly if it’s been permanently mounted.
Learn more with Top tips for extending DLP projector lamp life

The post Swap your old Epson EB-85 projector lamp for new appeared first on DLP Lamp Guide - LCD and DLP Repair Tips - Fix Your DLP - FixYourDLP.com.

3 steps to a new Epson EB-826W projector lamp

Shelagh McNally — Wed, 26 Nov 2014 18:30:00 +0000

This guide will show you how to replace the Epson EB-826W projector lamp in three easy steps.

Step 1: Watching for end of life

It is time to replace the Epson EB-826W projector lamp when the following signs are seen:

The projected image gets darker or starts to deteriorate.
The message Replace the lamp appears on the screen
The projector lamp warning starts flashing.

Step 2: Buy authentic Epson EB-826W projector lamp

Your Epson EB-826W projector needs an authentic projector lamp in order to keep working at its best levels. Look for the seal of approval before buying your Epson EB-826W projector lamp. Avoid generic lamps and don’t be tempted by their bargain prices– they can damage the sensitive electronics in your projector. Generic lamps have a shorter lamp life and are prone to explosions. Without the necessary protective guards in place they can damage your eyesight and expose you to toxic materials and carcinogenic materials. Learn how to protect yourself. Read the 7 Ways to Spot a Counterfeit Lamp.

Find this lamp on Amazon sold by these authorized dealers:

Step 3: Installing the Epson EB-826W projector lamp

The Epson EB-826W uses the Epson ELPLP50 V13H010L50 projector lamp.

Before installation:

Turn power button off wait for light to stop flashing.
Turn off power switch on Epson EB-826W projector.
Unplug the power cord.
Before changing the projector lamp, allow the Epson EB-826W projector to cool down. It should be cool to the touch before you open it to change the projector lamp. Otherwise you run the risk of burning yourself.
Do not operate the projectors while any of the lamps are removed as this may result in malfunctions, fire hazard and other accidents.

Caution: Don’t touch the actual bulb with your fingers since the oil from your skin can cause a black spot on the bulb.

The lamp cover is found on top of the Epson EB-826W projector. Loosen the lamp cover screw — you can’t remove it only loosen it.

Slide the Epson EB-826W projector lamp cover off.

Loosen the two screws holding the Epson ELPLP50 V13H010L50 projector lamp in place.

Grab the Epson ELPLP50 projector lamp by the side indents. Gently pull the lamp out. Pulling too quickly can cause the bulb to shatter. Learn what to do should this happen.

NOTE: The Epson ELPLP50 V13H010L50 projector lamp contains mercury and should not be thrown into regular garbage. Recycle your used lamps! If you bought from an authentic manufacturer they will recycle the lamp for you at no extra cost (another reason to buy authentic lamps).

Gently insert the Epson ELPLP50 projector lamp making sure it’s facing the right way.

Tighten the screws on the new Epson ELPLP50 projector lamp. Be sure not to tighten too much or the lamp may not work.

Replace the lamp cover and tighten the screw on the EB-826W projector lamp cover.

Reset the Epson EB-826W projector lamp timer.

Reset the projector lamp timer

Reset the Epson EB-826W projector Lamp Replacement Counter only when the Epson ELPLP50 projector lamp has been replaced.

Press the MENU button on the remote control. The Lamp Reset Menu will appear.
Scroll down to the RESET LAMP HOURS. Press ENTER.
A prompt appears asking if you want to RESET LAMP HOURS?
Select YES and press ENTER.
Press MENU to exit.

Prolong the life of the Epson ELPLP50 projector lamp:

Extend the life of the newly installed Epson ELPLP50 projector lamp with the following tips:

Keep your air filters clean to avoid overheating the projector.
Turn off the Epson EB-826W projector and let it stand for at least one hour ever 24 hours. An average use of four to five hours per day will ensure longer lamp life.
Make sure there is enough airflow around the projector particularly if it’s been permanently mounted.
Learn more with Top tips for extending DLP projector lamp life.

The post 3 steps to a new Epson EB-826W projector lamp appeared first on DLP Lamp Guide - LCD and DLP Repair Tips - Fix Your DLP - FixYourDLP.com.

Changing the Epson EB-824 projector lamp

Shelagh McNally — Tue, 25 Nov 2014 06:43:00 +0000

Wondering when and how to replace the Epson EB-824 projector lamp? We’ll show you how! Keep reading.

Watching for end of life

It is time to replace the Epson EB-824 projector lamp when the following signs are seen:

The projected image gets darker or starts to deteriorate.
The message Replace the lamp appears on the screen
The projector lamp warning starts flashing.

The importance of authentic projector lamps

An authentic projector lamp makes all the difference in how your Epson EB-824 projector performs. Generics just can’t offer the same performance or value. Look for the seal of approval before buying your Epson EB-824 projector lamp. Generic lamps have a shorter lamp life and are prone to explosions. Without the necessary protective guards in place generics can damage your eyesight as well as exposing you to toxic materials and carcinogenic materials. Installing them can damage the sensitive electronics in your projector.

Avoid getting fooled into buying generic lamps posing as the real deal. Learm how to protect yourself. Read the 7 Ways to Spot a Counterfeit Lamp.

Find this lamp on Amazon sold by these authorized dealers:

Installing the Projector Lamp Replacement

The Epson EB- 824 uses the Epson ELPLP50 V13H010L50 projector lamp.

Before installation:

Turn power button off wait for light to stop flashing.
Turn off power switch on Epson EB-824 projector.
Unplug the power cord.
Before changing the projector lamp, allow the Epson EB-824 projector to cool down. It should be cool to the touch before you open it to change the projector lamp. Otherwise you run the risk of burning yourself.
Do not operate the projectors while any of the lamps are removed as this may result in malfunctions, fire hazard and other accidents.

Caution: Don’t touch the actual bulb with your fingers since the oil from your skin can cause a black spot on the bulb.

The lamp cover is found on top of the Epson EB-824 projector. Loosen the lamp cover screw — you can’t remove it only loosen it.

Slide the Epson EB-824 projector lamp cover off.

Loosen the two screws holding the Epson ELPLP50 V13H010L50 projector lamp in place.

Grab the Epson ELPLP50 projector lamp by the side indents. Gently pull the lamp out. Pulling too quickly can cause the bulb to shatter. Learn what to do should this happen.

Gently insert the Epson ELPLP50 projector lamp making sure it’s facing the right way.

Tighten the screws on the new Epson ELPLP50 projector lamp. Be sure not to tighten too much or the lamp may not work.

Replace the lamp cover and tighten the screw on the EB-824 projector lamp cover.

Reset the Epson EB-824 projector lamp timer.

Reset the projector lamp timer

Reset the Epson EB-824 projector Lamp Replacement Counter only when the Epson ELPLP50 projector lamp has been replaced.

Press the MENU button on the remote control. The Lamp Reset Menu will appear.
Scroll down to the RESET LAMP HOURS. Press ENTER.
A prompt appears asking if you want to RESET LAMP HOURS?
Select YES and press ENTER.
Press MENU to exit.

Prolong the life of the Epson ELPLP50 projector lamp:

Extend the life of the newly installed Epson ELPLP50 projector lamp with the following tips:

Keep your air filters clean to avoid overheating the projector.
Turn off the Epson EB-824 projector and let it stand for at least one hour ever 24 hours. An average use of four to five hours per day will ensure longer lamp life.
Make sure there is enough airflow around the projector particularly if it’s been permanently mounted.
Learn more with Top tips for extending DLP projector lamp life

The post Changing the Epson EB-824 projector lamp appeared first on DLP Lamp Guide - LCD and DLP Repair Tips - Fix Your DLP - FixYourDLP.com.

Replace the Epson Powerlite 826W projector lamp

Shelagh McNally — Wed, 05 Nov 2014 05:14:00 +0000

When the Epson Powerlite 826W projector lamp has reached its end of life this guide will show you how to install a new projector lamp.

Note: These instructions can also be used for the PowerLite 826W+ projector.

Why invest in authentic projector lamps

An authentic projector lamp makes all the difference in how your Epson PowerLite 826W projector performs. Generics just can’t offer the same performance or value. Look for the seal of approval before buying your Epson PowerLite 826W projector lamp.

6 reasons to avoid generic lamps:

shorter lamp life
created with toxic materials and carcinogenic parts including Krypton-85
prone to explosions
can damage the sensitive electronics in your projectors
no safeguards to protect your eyesight
no guarantee or refunds offered.

Learm how to protect yourself. Read the 7 Ways to Spot a Counterfeit Lamp.

Find this lamp on Amazon sold by these authorized dealers:

Watching for end of life

The life span of the Epson PowerLite 826W projector lamp is approximately 5000 hours when the Power Consumption in the Setting menu is set to Normal. When Power Consumption is set to ECO mode, there is approximately 6000 hours.

It is time to replace the Epson PowerLite 826W projector lamp when the following signs are seen:

The projected image gets darker or starts to deteriorate.
The message Replace the lamp appears on the screen
The projector lamp warning light flashes orange.
When the lamp warning light flashes red — this projector lamp is burnt out and must be replaced immediately.

Installing the Projector Lamp Replacement

The Epson Powerlite 826W uses the Epson ELPLP50 V13H010L50 projector lamp replacement.

Before installation:

Turn power button off wait for light to stop flashing.
Turn off power switch on Epson PowerLite 826W projector.
Unplug the power cord.
Allow the Epson PowerLite 826Wprojector to cool for one hour – it should be cool to the touch. These projectors run a high temperatures so you can burn yourself very badly if the projector has not cooled enough before being opened up.
Do not operate the projectors while any of the lamps are removed as this may result in malfunctions, fire hazard and other accidents.

Caution: Don’t touch the actual bulb with your fingers since the oil from your skin can cause a black spot on the bulb.

The lamp cover is found on top of the Epson PowerLite 826W projector. Loosen the lamp cover screw — you can’t remove it only loosen it.

Slide the Epson PowerLite 826W projector lamp cover off.

Loosen the two screws holding the Epson ELPLP50 V13H010L50 projector lamp in place.

Grab the Epson ELPLP50 projector amp by side indents. Gently pull the lamp out. Pulling too quickly can cause the bulb to shatter. Learn what to do should this happen.

Gently insert the Epson ELPLP50 projector lamp making sure it’s facing the right way.

Tighten the screws on the new Epson ELPLP50 projector lamp. Be sure not to tighten too much or the lamp may not work.

Replace the lamp cover and tighten the screw on the PowerLite 826W projector lamp cover.

Reset the Epson PowerLite 826W projector lamp timer.

Reset the projector lamp timer

Reset the Epson PowerLite 826W projector Lamp Replacement Counter only when the Epson ELPLP50 projector lamp has been replaced.

Press the MENU button on the remote control. The Lamp Reset Menu will appear.
Scroll down to the RESET LAMP HOURS. Press ENTER.
A prompt appears asking if you want to RESET LAMP HOURS?
Select YES and press ENTER.
Press MENU to exit.

Prolong the life of the Epson ELPLP50 projector lamp:

Extend the life of the newly installed Epson ELPLP50 projector lamp with the following tips:

Keep your air filters clean to avoid overheating the projector.
Turn off the Epson PowerLite 826W projector and let it stand for at least one hour ever 24 hours. An average use of four to five hours per day will ensure longer lamp life.
Make sure there is enough airflow around the projector particularly if it’s been permanently mounted.
Learn more with Top tips for extending DLP projector lamp life

The post Replace the Epson Powerlite 826W projector lamp appeared first on DLP Lamp Guide - LCD and DLP Repair Tips - Fix Your DLP - FixYourDLP.com.

3 steps to a new Epson PowerLite 825 projector lamp

Shelagh McNally — Wed, 29 Oct 2014 17:11:00 +0000

Don’t stress about changing the Epson PowerLite 825 projector lamp. Use this guide to help you out!

Note: These instructions can also be used for the PowerLite 825+ projector

Step 1: Recognize end of life warnings

The life span of the Epson PowerLite 825 projector lamp is approximately 5000 hours when the Power Consumption in the Setting menu is set to Normal. When Power Consumption is set to ECO mode, there is approximately 6000 hours.

It is time to replace the projector lamp when:

The projected image gets darker or starts to deteriorate.
The message Replace the lamp appears on the screen
The projector lamp warning light flashes orange.
When the lamp warning light flashes red — this projector lamp is burnt out and must be replaced immediately.

Step 2: Purchasing the correct projector lamp

It’s critical to install the correct kind of projector lamp into your Epson PowerLite 825 projector to keep it working at its best levels. While their price can be tempting. generic lamps don’t offer the same kind of performance or value. Save time and money — buy an authentic Epson ELPLP50 Projector Lamp Replacement V13H010L50. Look for the seal of approval before buying.

6 reasons to avoid generic lamps:

generics have a shorter lamp life than original lamps
knock off lamps have been created with toxic materials and carcinogenic parts including Krypton-85
generic lamps are prone to explosions
copycat lamps can damage the sensitive electronics in your projectors
generic lamps offer no safeguards to protect your eyesight
no guarantee or refunds offered with generic lamps.

Learn how to protect yourself with 7 Ways to Spot a Counterfeit Lamp.

Find this lamp on Amazon sold by these authorized dealers:

Step 3: Installing the Epson ELPLP50 Projector Lamp Replacement

Before installation:

Turn power button off wait for light to stop flashing.
Turn off power switch on Epson PowerLite 825 projector.
Unplug the power cord.
Allow the Epson PowerLite 825 projector to cool for one hour – it should be cool to the touch. These projectors run a high temperatures so you can burn yourself every badly if the projector has not cooled enough before being opened up.
Do not operate the projectors while any of the lamps are removed as this may result in malfunctions, fire hazard and other accidents.

Caution: Don’t touch the screen or the actual bulb with your finger since the oil from your skin can cause a black spot on the bulb.

The lamp cover is found on top of the Epson PowerLite 825 projector. Loosen the lamp cover screw — you can’t remove it only loosen it.

Slide the Epson PowerLite 825 projector lamp cover off.

Loosen the two screws holding the Epson ELPLP50 V13H010L50 projector lamp in place.

Grab the Epson ELPLP50 projector amp by side indents. Gently pull the lamp out. Pulling too quickly can cause the bulb to shatter. Learn what to do should this happen.

Gently insert the Epson ELPLP50 projector lamp making sure it’s facing the right way.

Tighten the screws on the new Epson ELPLP50 projector lamp. Be sure not to tighten too much or the lamp may not work.

Replace the lamp cover and tighten the screw on the PowerLite 825 projector lamp cover.

Reset the Epson PowerLite 825 projector lamp timer.

Reset the projector lamp timer

Reset the Epson PowerLite 825 projector Lamp Replacement Counter only when the Epson ELPLP50 projector lamp has been replaced.

Press the MENU button on the remote control. The Lamp Reset Menu will appear.
Scroll down to the RESET LAMP HOURS. Press ENTER.
A prompt appears asking if you want to RESET LAMP HOURS?
Select YES and press ENTER.
Press MENU to exit.

Prolong the life of the Epson ELPLP50 projector lamp:

Extend the life of the newly installed Epson ELPLP50 projector lamp with the following tips:

Keep your air filters clean to avoid overheating the projector.
Turn off the Epson PowerLite 825 projector and let it stand for at least one hour ever 24 hours. An average use of four to five hours per day will ensure longer lamp life.
Make sure there is enough airflow around the projector particularly if it’s been permanently mounted.
Learn more with Top tips for extending DLP projector lamp life

The post 3 steps to a new Epson PowerLite 825 projector lamp appeared first on DLP Lamp Guide - LCD and DLP Repair Tips - Fix Your DLP - FixYourDLP.com.