Sanyo POA-LMP99

You can expect between 1,000 to 3,000 hours of use from the Sanyo POA-LMP99 if you’ve installed an authentic projector lamp.  The exact amount of time will vary depending on how much your projector is used and how regularly the air filters are cleaned. (Clogged air filters cause the projector to heat up and this puts stress on the lamp.)

You won’t get as many hours if you’ve installed a knock-offs lamp since they have much shorter life spans due to their inferior workmanship and materials. Installing a generic projector lamp also voids the warranty on your projector. Walk away from lamps with a price tag that seems too good to be true. The few dollars you save are not worth, especially if the knock-off explodes inside your computer. Learn the 7 tips for spotting counterfeits lamps and protect yourself.

Eco-friendly alternative

Looking for a green alternative? Try replacing only the bulb and re-using the same plastic cage. Watch this Sanyo POA-LMP69 replacement guide to find out more.

Projectors compatible with the Sanyo POA-LMP99 projector lamp:

• Sanyo PLC-XP40
• Sanyo PLC-XP45
• Sanyo PLV-70
• Sanyo PLV-75

Scroll down for links to step-by-step instructions on replacing the Sanyo POA-LMP99 lamp for each of these projectors.

When it’s time to replace the Sanyo POA-LMP99 your projector’s Lamp Replacement Indicator will turn yellow. Be sure to buy an genuine projector lamp and get a lamp that keeps your projector working properly.

For step-by-step instructions on replacing your Sanyo POA-LMP99 lamp, click on your model listed below:

Sanyo PLC-XP40 projector

Click here for step-by-step instructionson how to change the Sanyo POA-LMP99 projector bulb for the Sanyo PLC-XP40 projector.

Sanyo PLC-XP45 projector

Click here for step-by-step instructions on how to change the Sanyo POA-LMP99 projector bulb for the Sanyo PLC-XP45 projector.

Sanyo PLV-70 projector

Click here for step-by-step instructions on how to change the Sanyo POA-LMP99 projector bulb for the Sanyo PLV-70 projector.

Sanyo PLV-75 projector

Click here for step-by-step instructions on how to change the Sanyo POA-LMP99 projector bulb for the Sanyo PLV-75 projector.

The post When to replace Sanyo POA-LMP99 projector lamp appeared first on DLP Lamp Guide - LCD and DLP Repair Tips - Fix Your DLP - FixYourDLP.com.

Sanyo POA-LMP38

You can expect between 1,000 to 3,000 hours of use from the SANYO POA-LMP38 (service part no 610 291 5868) if you’ve installed an authentic projector lamp.  The exact amount of time will vary depending on how much your projector is used and how regularly the air filters are cleaned. (Clogged air filters cause the projector to heat up and this puts stress on the lamp.)

You won’t get as many hours if you’ve installed a knock-offs lamp since they have much shorter life spans due to their inferior workmanship and materials. Installing a generic projector lamp also voids the warranty on your projector. Walk away from lamps with a price tag that seems too good to be true. The few dollars you save are not worth, especially if the knock-off explodes inside your computer. Learn the 7 tips for spotting counterfeits lamps and protect yourself.

Projectors compatible with the SANYO POA-LMP38 (service part no 610 291 5868) projector lamp:

Sanyo PLC-XP40

Sanyo PLC-XP45

Sanyo PLV-70

Sanyo PLV-75

Scroll down for links to step-by-step instructions on replacing the SANYO POA-LMP38 (service part no 610 291 5868) lamp for each of these projectors.

When it’s time to replace the Sanyo POA-LMP38 your projector’s Lamp Replacement Indicator will turn yellow. Be sure to buy an genuine projector lamp and get a lamp that keeps your projector working properly.

For step-by-step instructions on replacing your SANYO POA-LMP38 (service part no 610 291 5868) lamp, click on your model listed below:

Sanyo PLC-XP40 projector

Click here for step-by-step instructions on how to change the SANYO POA-LMP38 (service part no 610 291 5868)projector bulb for the Sanyo PLC-XP40 projector.

Sanyo PLC-XP45 projector

Click here for step-by-step instructions on how to change the SANYO POA-LMP38 (service part no 610 291 5868) projector bulb for the Sanyo PLC-XP45 projector.

Sanyo PLV-70 projector

Click here for step-by-step instructions on how to change the SANYO POA-LMP38 (service part no 610 291 5868) projector bulb for the Sanyo PLV-70 projector.

Sanyo PLV-75 projector

Click here for step-by-step instructions on how to change the SANYO POA-LMP38 (service part no 610 291 5868) projector bulb for the Sanyo PLV-75 projector.

The post Lifespan of the Sanyo POA-LMP33 appeared first on DLP Lamp Guide - LCD and DLP Repair Tips - Fix Your DLP - FixYourDLP.com.

Sanyo PLV-75 projector

When your Sanyo PLV-75 projector lamp nears end of life, you’ll see the Lamp Replacement Indicator on the top panel turn yellow. Replace the lamp immediately with model Sanyo POA-LMP99 (service parts no 610 325 2940).

STEP ONE: Purchasing the correct projector lamp

Prolong the life of your Sanyo PLV-75 projector and save money by installing an original Sanyo POA-LMP99 (service parts no 610 325 2940) projector lamp. Generic lamps look like a great bargain but these knock-off lamps are created with inferior materials making them susceptible to explosions when installed. They also  have a shorter life span and can damage the precise components in your Sanyo PLC-PLV-75 projector.

Buying authentic guarantees a projector lamp created with genuine, non-hazardous materials by the original manufacturer. These lamps come with money-back guarantee and warranty covering.   It’s worth the few extra dollars to eliminate potential problems and have a lamp built to work properly with your Sanyo PLC-PLV-75 sensitive mechanisms.. Go with an authentic Sanyo POA-LMP99 (service parts no 610 325 2940) projector lamp and make life easier.  Learn more about spotting dangerous projector lamps by reading our article: 7 tips for spotting counterfeits.

Eco-friendly alternative

Looking for a green alternative? Try replacing only the bulb and re-using the same plastic cage. Watch this Sanyo POA-LMP69 replacement guide to find out more.

STEP TWO: Installing the new Sanyo POA-LMP99 lamps

• Wait until the  Sanyo PLV-75 is cool to the touch before installing the new lamp.  Turn off the projector, unplug the AC cord and allow 45 to 60 minutes. These projectors operate under high heat and there is a possibility of being burned, if the projector is not fully cooled before changing the Sanyo POA-LMP99 (service parts no 610 325 2940) lamp.
• The lamp cover for the PLV-75 projector is located at the back of the projector. Turn the projector around and loosen the two screws holding the cover in place. Place the cover to one side.
• Inside you’ll find the Sanyo POA-LMP99 (610 325 2940) lamp cage. Loosen both screws holding the lamp cage in place. Grab the lamp handle and gently lift the lamp out of its socket. Place to one side. Be sure to dispose of the used lamp through a local recycling program. Don’t throw this lamp into the regular garbage as it contains mercury.

• Taking the newSanyo POA-LMP99 (6103252940) lamp assembly by the handle place it into the slot. Avoid touching the actual bulb as the oil from your fingers can burn a black spot on the lenses or you can accidentally break the bulb. Don’t force the lamp into place — it should slide into the slot easily.
• Once the lamp is in, tighten both screws on the Sanyo POA-LMP99 (service parts no 610 325 2940) lamp assembly. Make sure the screws have been tightened properly or the Sanyo PLV-75 projector will not turn on.
• Replace the Lamp Cover and tighten the screw. Re-connect the power cord and turn on the Sanyo PLV-75 projector. If the Sanyo POA-LMP99 (610 325 2940) lamp does not turn on after the warm-up period, try re-installing the lamp.
• Reset the Lamp Replace Counter by following the instructions below.

NOTE: Your old  Sanyo POA-LMP99 (service parts no 610 325 2940) lamp should be properly recycled. These lamps contain mercury and can’t be placed into common garbage.

STEP THREE: Reset the Lamp Replace Counter

The Lamp Replace Counter for the Sanyo PLV-75 will track the correct age of your newly installed lamp and trigger the Lamp Replace Indicator. Failure to reset the counter may result in the projector not tracking the end of life for the Sanyo POA-LMP99 (service parts no 610 325 2940) and letting the projector inadvertently use the lamp past its normal life cycle which may result in you  Sanyo PLC-XP40 suddenly stop working.

NOTE: RESET the Lamp Replace Counter ONLY WHEN the lamp has been REPLACED.

• Press the MENU Button to display the MAIN MENU.
• Press the POINT LEFT/RIGHT button and scroll right to select SETTING.
• Press the SELECT button to display the SETTING DISPLAY menu.
• Press the POINT DOWN button (a red arrow will appear).
• Move the red arrow to the LAMP AGE and then press the SELECT button.
• Select the RESET option.
• The message “Lamp replace counter reset?”  appears. Move the arrow down to YES and press the SELECT button.
• 
• The message “OK?” appears. Click on YES.
• Move the arrow to QUIT and press the SELECT button.

Extend the life of the Sanyo POA-LMP99 projector lamp

Extend the life of your newly installed Sanyo POA-LMP99 (service parts no 610 325 2940)9 by following these helpful tips:

• Wait at least five minutes before turning the Sanyo PLV-75 projector off.
• Don’t operate the projector continuously without letting it stand for at least one hour turned off every 24 hours.
• Cleaning the air filter regularly will also prolong the life of theSanyo POA-LMP99 (service parts no 610 325 2940) and prevent the Sanyo PLV-75 projector from overheating.

The post Replace your Sanyo PLV-75 projector lamp appeared first on DLP Lamp Guide - LCD and DLP Repair Tips - Fix Your DLP - FixYourDLP.com.