We’ve got a lot of television manuals for you to check out. This set is a compilation of Sony TV manuals we’ve found over the years. All of them are available for download in PDF format.

You can download or view them here:

• Sony KDF-42WE655, KDF-50WE655, KDF-55WF655, KDF-60WF655 Click here.
• Sony KDF-60XBr950, KDF-70XBR950 Click here.
• Sony KF-42WE610, KF-50WE610, KF-60WE610 Click here.
• Sony KF-42WE620, KF-50WE620 Click here.
• Sony KDS-R50XBR1, KDS-R60XBR1 Click here.
• Sony KDS-50A2000, KDS-55A2000, KDS-60A2000 Click here.
• Sony KDS-50A3000, KDS-55A3000, KDS-60A3000 Click here.
• Sony KDS-50A2020, KDS-55A2020, KDS-60A2020 Click here.
• Sony KDS-50XBR800, KDS-60XBR800 Click here.
• Sony KDS-60DX100 Click here.
• Sony KDF-E55A20, KDF-E60A20 Click here.
• Sony KDF-WF655, KDF-XS955 Click here.
• Sony KDF-55XS955, KDF-60XS955 Click here.
• Sony KL-37W1U, KL-50W1U Click here.
• Sony KDF-50E2000, KDF-50E2010 Click here.
• Sony KDF-42E2000, KDF-46E2000, KDF-50E2000, KDF-55E2000 Click here.
• Sony KDF-E42A10, KDF-E50A10 Click here.
• Sony KDS-50A2020, KDS-55A2020, KDS-60A2020 Click here.
• Sony KL-W7000, KL-W9000 Click here.
• Sony KF-50XBR800, KF-60XBR800 Click here.
• Sony KDS-R50XBR1, KDS-R60XBR1 Click here.
• Sony KDS-50A2000, KDS-55A2000, KDS-60A2000 Click here.
• Sony KDF-42/50 WE655, KDF-55/60 WF655, KDF-55/60 XS955 Click here.

The post Sony TV Owner’s Manual for your LCD Projection Television appeared first on DLP Lamp Guide - LCD and DLP Repair Tips - Fix Your DLP - FixYourDLP.com.

Step 1.- Before you start doing anything, unplug the TV from the wall outlet. There are a few thousand volts going through your ballast, be very careful! It’s also a good idea to let the TV cool down for at least 15-20 minutes as the bulb itself can get extremely hot and you can severely burn your hand.

Step 2.- In the front of your TV there is a bottom panel where you can access the lamp enclosure door.
Remove it by uninstalling two screws on each side of the panel with your Flat tip screwdriver.

Step 3.- Now go back to the front and you’ll see a metal security bar across the enclosure.
Use your screwdriver to remove it.

Step 4.- Inside you’ll be able to see a hex toped screw that holds the enclosure in place.
Use a Hex key to release it.

Step 5.- Pull it down and you’ll be able to extract it with ease.

Step 6.- Pop in your new enclosure the same way you took out the old one.
Screw it back in with your hex key.

Place & reinstall the metal bar back again.

Step 7.- Take the bottom panel and place it back in the front of your TV.

The post How to replace Sony XL-2200 lamp enclosure for your projection TV. appeared first on DLP Lamp Guide - LCD and DLP Repair Tips - Fix Your DLP - FixYourDLP.com.