Epson ELPLP42 projector lamp

Which projectors are compatible with the Epson ELPLP42?

Consult this guide to find them and learn how to replace the Epson ELPLP42 lamp in each one.

Replacement warning signs

The life span of the Epson ELPLP42 lamp ranges from approximately 3000 hours in HIGH brightness mode to about 4000 hours in LOW brightness mode.

Watch for the signs that it’s time to replace the Epson ELPLP42 projector lamp:

the image on screen gets darker and starts to deteriorate.
projector warning lamp flashes red and keeps flashing
a warning message “REPLACE THE LAMP” appears on screen.

6 reasons to buy an authentic Epson ELPLP42

“Generic and compatible” are euphemisms for a knock-off, copycat lamp that presents many problems:

shorter lamp life than original lamps
toxic materials and carcinogenic parts including Krypton-85
prone to explosions
incompatibility causing damage to the sensitive electronics in your projectors
no guarantee or refunds and no technical support
installing a generic projector lamp voids your warranty.

Avoid the generic lamps being sold at discount prices on the Internet. Invest in genuine Epson ELPLP42 from an authorized dealer. Look for the seal of approval.

Buy this lamp on Amazon sold by these authorized dealers:

Problems associated with generics:

created with inferior material
exposure to carcinogenic substances such Krypton-85
no properly calibrated to work with sensitive electronics in projectors
voids your warranty
prone to explosion
missing important safety guards to protect your eyesight

Compatible Projectors

The Epson ELPLP42 projector lamp is compatible with:

Epson EB-400We, Epson EB-400W, Epson EB-410We , Epson EB-410W, Epson EMP-280, Epson EMP-410WE, Epson EMP-410W, Epson 400WE, Epson EMP-400W, Epson EMP-822, Epson EMP-822H, Epson EMP-83, Epson EMP-83H, Epson EMP-83He, Epson EX-90, Epson H281A, Epson PowerLite 410W/410WE, Epson PowerLite 400W/400WE, Epson Powerlite 822, Epson PowerLite 822+, Epson PowerLite 822p, Epson PowerLite 83V+, Epson PowerLite 83, Epson Powerlite 83+, Epson PowerLite 83C

For step-by-step instructions on replacing your Epson ELPLP42 projector lamp, click on your projector listed below:

Click here for step-by-step instructions on how to change the Epson ELPLP42 projector lamp for the Epson EB-400We projector.

Click here for step-by-step instructions on how to change the Epson ELPLP42 projector lamp for the Epson EMP-400W projector.

Click here for step-by-step instructions on how to change the Epson ELPLP42 projector lamp for the Epson EMP-822 projector.

Epson-EMP-822H-projector-Epson-ELPLP42-lamp

Click here for step-by-step instructions on how to change the Epson ELPLP42 projector lamp for the Epson EMP-822H projector.

Click here for step-by-step instructions on how to change the Epson ELPLP42 projector lamp for the Epson EMP-83 projector.

Click here for step-by-step instructions on how to change the Epson ELPLP42 projector lamp for the Epson EMP-83H projector.

Click here for step-by-step instruction on how to change the Epson ELPLP42 projector lamp for the Epson EMP-83He projector.

Prolong the life of the Epson ELPLP42 lamp:

Extend the life of the newly installed Epson ELPLP42 with the following tips:

Keep your air filters clean to avoid overheating the projector.
Turn off the Epson projector and let it stand for at least one hour ever 24 hours. An average use of four to five hours per day will ensure longer lamp life.
Make sure there is enough airflow around the projector particularly if it’s been permanently mounted.
Learn more with Top tips for extending DLP projector lamp life

Finding projectors compatible with the Epson ELPLP42 lamp