Which projectors are compatible with the Epson ELPLP39 lamp?

Epson-ELPLP39-lampConsult this guide to find which projectors are them and learn how to replace the lamp in each one.

Replacement warning signs

You can expect 3000 hours for the life span of the Epson ELPLP39 before warning signs being to appear. Watch for these signs that it’s time to replace the Epson ELPLP39 projector lamp:

  • the image on screen gets darker and starts to deteriorate.
  • projector warning lamp flashes red and keeps flashing
  • a warning message “REPLACE THE LAMP” appears on screen.

6 reasons to buy an authentic Epson ELPLP39

Buy an authentic Epson ELPLP39 and avoid these problems associated with cheaper generic

Invest in genuine Epson ELPLP39 from an authorized dealer. Look for the seal of approval.

Compatible Projectors

The Epson ELPLP39 projector lamp is compatible with:

Powerlite Home Cinema 1080, PowerLite Home Cinema 1080 UB, PowerLite Home Cinema 720, EMP-TW700, EMP-TW980, EMP-TW2000, EMP-TW1000, Ensemble HD 1080, Ensemble HD 720, PowerLite Pro Cinema 810, PowerLite Pro Cinema 810 HQV, PowerLite Pro Cinema 1080, PowerLite Pro Cinema 1080 HQV, PowerLite Pro Cinema 1080 UB, V11H244020, V11H245020MB, V11H289020.

For step-by-step instructions on replacing your Epson ELPLP39 projector lamp, click on your projector listed below:

 

Epson-Home-Cinema-1080-projector-Epson-ELPLP39-projector

Click here for step-by-step instructions on how to change the Epson ELPLP39 projector lamp for the Powerlite Home Cinema 1080 projector.

 

 

 

 

 

 

Epson-PowerLite-Pro-Cinema-1080-UB-projector-Epson-ELPLP39-lamp

Click here for step-by-step instructions on how to change the Epson ELPLP39 projector lamp for the PowerLite Home Cinema 1080 UB projector.

 

 

 

 

 

Epson-PowerLite-Home-Cinema-720-projector-Epson-ELPLP39-lamp

 

 

 

Click here for step-by-step instructions on how to change the Epson ELPLP39 projector lamp for the PowerLite Home Cinema 720 projector.

 

 

 

 

Epson-EMP-TW700-projector-Epson-ELPLP39-lamp

 

Click here for step-by-step instructions on how to change the Epson ELPLP39 projector lamp for the EMP-TW700 projector.

 

 

 

 

Prolong the life of the Epson ELPLP39 lamp:

Extend the life of the newly installed Epson ELPLP39 with the following tips:

  • Blocked air filters can cause your projector to overheat and shorten the lamp life.
  • Turning off the Epson projector for at least one hour per day and limiting use to 5 hours of daily usage will prolong lamp life.
  • Make sure there is enough airflow around the projector particularly if it’s been permanently mounted. The projector overheating can shorten the lamp life.
  • Learn more with Top tips for extending DLP projector lamp life
Tagged with: , , , , , , , , , , , , , , , , ,

Leave a Reply

Your email address will not be published. Required fields are marked *

*

Time limit is exhausted. Please reload CAPTCHA.

This site uses Akismet to reduce spam. Learn how your comment data is processed.