Be prepared with the right replacement lamp

Your projector needs an authentic Epson PowerLite 732 projector lamp. While there are many places selling the Epson PowerLite 732, the challenge  is finding an authentic lamp. The Internet is flooded with generic imitations that can damaged your projector’s optics . While these lamps may have a slighter lower price than authentic replacement projector lamps in the long they cost more. Generic lamps have a shorter lamp life and are prone to explosions.

There is no money back guarantee as well. Aside from the obvious problems, these generic lamps have also been created with toxic materials that present a health hazards. Generic manufacturers have also skimped on the protective guards and these lamps can damage your eyesight.

Save yourself unnecessary headaches and buy an authentic Epson ELPLP32 replacement projector lamp. Look for the seal of approval and learn to recognize the 7 Signs of a Counterfeit Lamp.

Find this lamp on Amazon sold by these authorized dealers:

• ELPLP32 Epson EMP-750 Projector Lamp
• Epson ELP-LP32 Projector Assembly with High Quality Osram Projector Bulb Inside
• Epson Projector Lamp Part ELPLP32-ER Model Epson EMP 732 EMP 750
• ELP-LP32 Epson Projector Lamp Replacement. Projector Lamp Assembly with High Quality Genuine Original Osram P-VIP Bulb inside.

Watch for end of life signs

Track the number of hours left in the Epson PowerLite 732 projector  by going to the Info menu found on the Main menu. The Epson ELPLP32 projector lamp will last up to 2000 hours if the Brightness setting is on normal. Change the setting to low and get up to 3000 hours.

Watch for these signs as well to let you know the end of life is coming for the Epson ELPLP32 projector lamp:

• The lamp warning light on the projector starts flashing orange. If it turns red and stays red, replace the Epson ELPLP32 projector lamp immediately.
• Imaged becomes dark, colors are off or appear to be deteriorating
• A message saying “Replace the lamp” appears on screen.

Install the new Epson ELPLP32

Installation will take under 10 minutes but before installing the new Epson ELPLP32 projector lamp into the Epson PowerLite 732 projector, be sure to follow these preparation steps:

• Turn power button off and wait for the power light to stop flashing.
• Unplug the power cord from the Epson Powerlite 732 projector.
• The Epson Powerlite 732 should be cool to the touch before you try to change the Epson ELPLP32 projector lamp. This projector operate at a high temperatures so you can burn yourself badly if you don’t allow for the cool down period.
• Do not operate the projectors while any of the lamps are removed as this may result in malfunctions, fire hazard and other accidents.

• Turn the Epson PowerLite 732 over and placing on a soft, scratch free surface.
• Press on the tabs located on top of the Epson PowerLite 732 cover. Lift up the lamp cover.

• Using the screw driver provided with the Epson PowerLite 732 projector, loosen the two screws holding the Epson ELPLP32 projector lamp in place.

Pressing on the indents on the sides of the Epson ELPLP32, pull the projector lamp gently up out of the Epson PowerLite 732 projector. Take care not to bang the actual lamp or it may break. Learn how to do a proper clean up if the lamp breaks or explodes.

NOTE: The Epson ELPLP32 projector lamp contains mercury and should not be thrown into regular garbage. Recycle your used lamps and be good to the environment.

• Gently place the new Epson ELPLP32 lamp into the Epson PowerLite 732 making sure not to touch the actual bulb. The oil on6your fingers will leave a burn mark on the lamp once it heats up and this can cause black out spots on the screen.

• Tighten the screws on the new Epson ELPLP32 lamp.
• Slide the air filter out and remove it immediately. Slide in the new filter that came with the Epson ELPLP32 lamp. Replace the lamp cover.
• You are now ready to reset the lamp timer.

Reset the lamp timer in the Epson PowerLite 732

Your Epson PowerLite 732 has a built-in timer to track the life of the Epson ELPLP32 projector lamp. So, it’s very important that you reset the lamp timer every time you replace the Epson ELPLP32 projector lamp.

Here’s how:

• Press the MENU button on either the remote control on the projector’s control panel.
• Scroll down to the RESET option.
• Press Enter. The RESET ALL screen will appear.
• Scroll down to LAMP-HOURS RESET.
• Press ENTER to open up the confirmation screen
• 

• Highlight YES.
• Press ENTER.
• Press ESC or MENU to exit this option.

Congratulations! You’ve just installed at new Epson ELPLP32 projector lamp in your Epson PowerLite 740c.

Tips for a longer lasting Epson ELPLP32 projector lamp:

• Keep your air filters clean to avoid overheating the projector.
• Turn off the Epson Powerlite 732 projector and let it stand for at least one hour ever 24 hours. An average use of four to five hours per day will ensure longer lamp life.
• Make sure there is enough airflow around the projector particularly if it’s been permanently mounted.
• Learn more with Top tips for extending DLP projector lamp life.

The post Changing the Epson PowerLite 732 projector lamp appeared first on DLP Lamp Guide - LCD and DLP Repair Tips - Fix Your DLP - FixYourDLP.com.

Why buy OEM replacement lamps?

Your Epson EB- 824H uses the Epson ELPLP50  projector lamp. An authentic OEM replacement projector lamp makes all the difference in how your Epson EB-824H projector performs. Generics just can’t offer the same performance and damage the sensitive electronics in your projector. Look for the seal of approval before buying your OEM Epson EB-824H projector lamp. Generic lamps have a shorter lamp life and are prone to explosions. Without the necessary protective guards in place generics can damage your eyesight as well as exposing you carcinogenic materials. Learm how to protect yourself. Read the 7 Ways to Spot a Counterfeit Lamp.

Find this lamp on Amazon sold by these authorized dealers:

• ELPLP50 Epson Projector Lamp Replacement. Epson ELP-LP50 Projector Lamp with High Quality 200 Watt UHE Osram Bulb Inside
• Premium ELPLP50 / V13H010L50 Projection Lamp With Housing For EPSON Projector EB-824, EB-824H, EB-825, EB-825H, EB-825V, EB-825VH, EB-826W, EB-826WH, EB-826WV, EB-826WVH, EB-84, EB-84H, EB-84He, EB-84,L EB-85, EB-85H, EB-85V, EB-85VH, PowerLite 825, PowerLite 825+, PowerLite 826W, PowerLite 826W+
• Lutema for Epson ELPLP50 Replacement DLP/LCD Cinema Projector Lamp – Osram Inside
  Projector Lamp ELPLP50/V13H010L50 w/Housing For EPSON Projectors and 1-Year Replacement Warranty
• G-lamps ELPLP50 / V13H010L50 Replacement Lamp with Housing for EPSON PowerLite 825/825+/826W/826W+/84/84+/85/85+
  

Watching for end of life

It is time to replace the Epson EB-824H projector lamp when the following signs are seen:

• The projected image gets darker or starts to deteriorate.
• The message Replace the lamp appears on the screen
• The projector lamp warning starts flashing.

Installing the Projector Lamp Replacement

Before installation:

• Turn power button off wait for light to stop flashing.
• Turn off power switch on Epson EB-824H projector.
• Unplug the power cord.
• Before changing the projector lamp, allow the Epson EB-824H projector to cool down. It should be cool to the touch before you open it to change the projector lamp. Otherwise you run the risk of burning yourself.
• Do not operate the projectors while any of the lamps are removed as this may result in malfunctions, fire hazard and other accidents.

Caution: Don’t touch the actual bulb with your fingers since the oil from your skin can cause a black spot on the bulb.

The lamp cover is found on top of the Epson EB-824H projector. Loosen the lamp cover screw — you can’t remove it only loosen it.

Slide the Epson EB-824H projector lamp cover off.

Loosen the two screws holding the Epson ELPLP50 projector lamp in place.

Grab the Epson ELPLP50 projector lamp by the side indents. Gently pull the lamp out. Pulling too quickly can cause the bulb to shatter. Learn what to do should this happen.

NOTE: The Epson ELPLP50  projector lamp contains mercury and should not be thrown into regular garbage. Recycle your used lamps! If you bought from an authentic manufacturer they will recycle the lamp for you at no extra cost (another reason to buy authentic lamps).

Gently insert the Epson ELPLP50 projector lamp making sure it’s facing the right way.

Tighten the screws on the new Epson ELPLP50 projector lamp. Be sure not to tighten too much or the lamp may not work.

Replace the lamp cover and tighten the screw on the EB-824H projector lamp cover.

Reset the Epson EB-824H projector lamp timer.

Reset the projector lamp timer

Reset the Epson EB-824H projector Lamp Replacement Counter only when the Epson ELPLP50 projector lamp has been replaced.

• Press the MENU button on the remote control. The Lamp Reset Menu will appear.
• Scroll down to the RESET LAMP HOURS. Press ENTER.
• A prompt appears asking if you want to RESET LAMP HOURS?
• Select YES and press ENTER.
• Press MENU to exit.

Prolong the life of the Epson ELPLP50 projector lamp:

Extend the life of the newly installed Epson ELPLP50 projector lamp with the following tips:

• Keep your air filters clean to avoid overheating the projector.
• Turn off the Epson EB-824H  projector and let it stand for at least one hour ever 24 hours. An average use of four to five hours per day will ensure longer lamp life.
• Make sure there is enough airflow around the projector particularly if it’s been permanently mounted.
• Learn more with Top tips for extending DLP projector lamp life.

The post How to replace the Epson EB-824H projector lamp appeared first on DLP Lamp Guide - LCD and DLP Repair Tips - Fix Your DLP - FixYourDLP.com.

Note: These instructions can also be used for the Epson PowerLite 84+ projector.

When to replace

If Power Consumption is set to normal, you can expect approximately 5000 hours of  Epson PowerLite 84 projector lamp lamp life. (Extend that time to 6000 hours by using the ECO Mode setting). When it’s time to replace the Epson PowerLite 84 projector lamp, you’ll see the following end of life signs:

• projected image gets darker or starts to deteriorate.
• a message Replace the lamp appears on the screen
• Epson Powerlite 84 projector lamp warning light flashes orange.
• projector lamp is burnt out and must be replaced immediately when the lamp warning light flashes red.

Authentic projector lamps are critical

Your Epson PowerLite 84 projector is a complicated machine with high-end optics. It needs a properly calibrated projector lamp in order to keep working at its best. Only an authorized OEM dealer can provide these lamps. Knock-off generics, sold at discount prices, simply can’t offer the same performance — they don’t have the correct parts and haven’t been calibrated. Look for the seal of approval before buying your Epson PowerLite 84 projector lamp.

6 reasons to buy authentic:

• generice have a shorter lamp life and actually cost you more money in the long run
• knockoff lamps are created with toxic materials and carcinogenic parts
• genreica prone to explosions
• knockoffs damage the sensitive electronics in your projectors
• generic lamp manufacturers have not installed any safeguards to protect your eyesight
• no guarantee or refunds offered.

Learm how to protect yourself with 7 Ways to Spot a Counterfeit Lamp.

Find this lamp on Amazon sold by these authorized dealers:

• ELPLP50 Epson Projector Lamp Replacement. Epson ELP-LP50 Projector Lamp with High Quality 200 Watt UHE Osram Bulb Inside
• Premium ELPLP50 / V13H010L50 Projection Lamp With Housing For EPSON Projector EB-824, EB-824H, EB-825, EB-825H, EB-825V, EB-825VH, EB-826W, EB-826WH, EB-826WV, EB-826WVH, EB-84, EB-84H, EB-84He, EB-84,L EB-85, EB-85H, EB-85V, EB-85VH, PowerLite 825, PowerLite 825+, PowerLite 826W, PowerLite 826W+
• Lutema for Epson ELPLP50 Replacement DLP/LCD Cinema Projector Lamp – Osram Inside
  Projector Lamp ELPLP50/V13H010L50 w/Housing For EPSON Projectors and 1-Year Replacement Warranty
• G-lamps ELPLP50 / V13H010L50 Replacement Lamp with Housing for EPSON PowerLite 825/825+/826W/826W+/84/84+/85/85+
  

Installing the Projector Lamp Replacement

The Epson Powerlite 84 uses the Epson ELPLP50 V13H010L50 projector lamp replacement. Before installating the new projector lamp followe these important safety procedures:

• Turn power button off wait for light to stop flashing.
• Turn off power switch on Epson PowerLite 84 projector.
• Unplug the power cord.
• Allow the Epson PowerLite 84 projector to cool for one hour – it should be cool to the touch. These projectors run a high temperatures so you can burn yourself  badly if the projector has not cooled enough before being opened up.
• Do not operate the projectors while any of the lamps are removed as this may result in malfunctions, fire hazard and other accidents.

The lamp cover is found on top of the Epson PowerLite 84 projector. Loosen the lamp cover screw — you can’t remove it only loosen it.

Slide the Epson PowerLite 826W projector lamp cover off.

Loosen the two screws holding the Epson ELPLP50 V13H010L50 projector lamp in place.

Grab the Epson ELPLP50 projector amp by side indents. Gently pull the lamp out. Pulling too quickly can cause the bulb to shatter. Learn what to do should this happen.

NOTE: The Epson ELPLP50 V13H010L50 projector lamp contains mercury and should not be thrown into regular garbage. Recycle your used lamps! If you bought from an authentic manufacturer they will recycle the lamp for you at no extra cost (another reason to buy authentic lamps).

Gently insert the Epson ELPLP50 projector lamp making sure it’s facing the right way. Caution: Don’t touch the screen or the actual bulb with your finger since the oil from your skin can cause a black spot on the bulb.

Tighten the screws on the new Epson ELPLP50 projector lamp. Be sure not to tighten too much or the lamp may not work.

Replace the lamp cover and tighten the screw on the PowerLite 84 projector lamp cover. You’re ready to reset the Epson PowerLite 84 projector lamp timer.

Reset the projector lamp timer

Reset the Epson PowerLite 84 projector Lamp Replacement Counter only when the Epson ELPLP50 projector lamp has been replaced.

• Press the MENU button on the remote control. The Lamp Reset Menu will appear.
• Scroll down to the RESET LAMP HOURS. Press ENTER.
• A prompt appears asking if you want to RESET LAMP HOURS?
• Select YES and press ENTER.
• Press MENU to exit.

Prolong the life of the Epson ELPLP50 projector lamp:

Extend the life of the newly installed Epson ELPLP50 projector lamp by:

• Keeping your air filters clean to avoid overheating the projector.
• Turning off the Epson PowerLite 84 projector and letting it rest at least one hour ever 24 hours. An average use of four to five hours per day will ensure longer lamp life.
• Make sure there is enough airflow around the projector particularly if it’s been permanently mounted.
• Learn more with Top tips for extending DLP projector lamp life.

The post Replacing the Epson PowerLite 84 projector lamp appeared first on DLP Lamp Guide - LCD and DLP Repair Tips - Fix Your DLP - FixYourDLP.com.

Get prepared with the right projector lamp

Invest in an authentic Epson PowerLite 740c projector lamp. The challenging part is finding an authentic merchant you can trust. The Internet has been flooded with copycat manufacturers who create generic imitations. You get what you pay for and it’s usually a number of problems.

6 reasons to avoid counterfeit projector lamps

• toxic materials present on the projector lamp (Krypton-85).
• damaged projector optics (expensive to repair)
• shorter lamp life than original lamps
• prone to explosions
• no money back guarantee

Save yourself unnecessary headaches and keep your warranty intact for your Epson PowerLite 740c projector. Look for the seal of approval and buy an authentic Epson ELPLP32 projector lamp. 7 Ways to Spot a Counterfeit Lamp.

Find this lamp on Amazon sold by these authorized dealers:

• ELPLP32 Epson EMP-750 Projector Lamp
• Epson ELP-LP32 Projector Assembly with High Quality Osram Projector Bulb Inside
• Epson Projector Lamp Part ELPLP32-ER Model Epson EMP 732 EMP 750
• ELP-LP32 Epson Projector Lamp Replacement. Projector Lamp Assembly with High Quality Genuine Original Osram P-VIP Bulb inside.

Watch for end of life signs

Track the umber of hours left in the by going to the Info menu found on the Main menu. The Epson ELPLP32 projector lamp will last up to 2000 hours if the Brightness setting is on normal. Change the setting to low and get up to 3000 hours.

Watch for these signs as well to let you know the end of life is coming for the Epson ELPLP32 projector lamp:

• The lamp warning light on the projector starts flashing orange. If it turns red and stays red, replace the Epson ELPLP32 projector lamp immediately.
• Imaged becomes dark, colors are off or appear to be deteriorating
• A message saying “Replace the lamp” appears on screen.

Install the new Epson ELPLP32

Installation will take under 10 minutes but before installing the new Epson ELPLP32 projector lamp into the Epson PowerLite 740c projector, be sure to follow these preparation steps:

• Turn power button off and wait for the power light to stop flashing.
• Unplug the power cord from the Epson Powerlite 740c projector.
• The Epson Powerlite 740c should be cool to the touch before you try to change the Epson ELPLP32 projector lamp. This projector operate at a high temperatures so you can burn yourself badly if you don’t allow for the cool down period.
• Do not operate the projectors while any of the lamps are removed as this may result in malfunctions,  fire hazard and other accidents.

• Turn the Epson PowerLite 740c over and placing on a soft, scratch free surface.
• Press on the tabs located on top of the Epson PowerLite 740c cover. Lift up the lamp cover.

• Using the screw driver provided with the Epson PowerLite 740c projector, loosen the two screws holding the Epson ELPLP32 projector lamp in place.

Pressing on the indents on the sides of the Epson ELPLP32, pull the projector lamp gently up out of the Epson PowerLite 740c projector. Take care not to bang the actual lamp or it may break. Learn how to do a proper clean up if the lamp breaks or explodes.

NOTE: The Epson ELPLP32 projector lamp contains mercury and should not be thrown into regular garbage. Recycle your used lamps and be good to the environment.

• Gently place the new Epson ELPLP32 lamp into the Epson PowerLite 740c making sure not to touch the actual bulb. The oil on6your fingers will leave a burn mark on the lamp once it heats up and this can cause black out spots on the screen.
• Tighten the screws on the new Epson ELPLP32 lamp.
• Slide the air filter out and remove it immediately. Slide in the new filter that came with the Epson ELPLP32 lamp. Replace the lamp cover.
• You are now ready to reset the lamp timer.

Reset the lamp timer in the Epson PowerLite 740c

Your Epson PowerLite 740c has a built-in timer to track the life of the Epson ELPLP32 projector lamp. So, it’s very important that you reset the lamp timer every time you replace the Epson ELPLP32 projector lamp.

Here’s how:

• Press the MENU button on either the remote control on the projector’s control panel.
• Scroll down to the RESET option.
• Press Enter. The RESET ALL screen will appear.
• Scroll down to LAMP-HOURS RESET.
• Press ENTER to open up the confirmation screen

• Highlight YES.
• Press ENTER.
• Press ESC or MENU to exit this option.

Congratulations! You’ve just installed at new Epson ELPLP32 projector lamp in your Epson PowerLite 740c.

Tips for a longer lasting Epson ELPLP32 projector lamp:

• Keep your air filters clean to avoid overheating the projector.
• Turn off the Epson Powerlite 740c projector and let it stand for at least one hour ever 24 hours. An average use of four to five hours per day will ensure longer lamp life.
• Make sure there is enough airflow around the projector particularly if it’s been permanently mounted.
• Learn more with Top tips for extending DLP projector lamp life

The post Install a new Epson PowerLite 740c projector lamp appeared first on DLP Lamp Guide - LCD and DLP Repair Tips - Fix Your DLP - FixYourDLP.com.