Noticing the end of life warning signs

When it’s time to replace the InFocus IN24EP projector lamp you may see the following signs:

• The projector image gets darker and starts to deteriorate.
• The projector lamp flashes red.
• The warning message REPLACE THE LAMP appears on screen.

Replace the Infocus IN24EP projector lamp immediately.

Invest in authentic

When you purchase an authentic projector lamp, you’re guaranteed a lamp that has been manufactured with high quality parts and calibrated to your projector. Generics don’t offer the same performance.

6 reasons to avoid generics

• shorter lamp life
• created with toxic materials and carcinogenic parts
• prone to explosions
• damage the sensitive electronics in your projectors
• hurt your eyesight since they have no safeguards
• installing a generic lamp voids your projector’s warranty.

Learn the 7 Ways to spot a counterfeit lamp.

Buy this lamp on Amazon sold by these authorized dealers:

• InFocus SP-LAMP-024 Projector lamp – for Learn Big IN24EP, Work Big IN24, IN26
• Replacement Lamp, IN24 & IN26/3000 Hours, SP-LAMP-024
• Lampedia SP-LAMP-024-001 Replacement Lamp for Infocus IN24/IN24EP/IN26/W240/W260

Installing the replacement projector lamp

Follow these important safety steps BEFORE installing the replacement

• Turn off the InFocus IN24EP projector and unplug the power cord.
• To avoid getting burned, let the InFocus IN24EP projector fully cooled before changing the lamp.
• Do not operate the projectors while any of the lamps are removed as this may result in malfunctions, fire hazard and other accidents.
• Caution: Don’t touch the screen or the actual bulb with your finger since the oil from your skin can cause a black spot on the bulb.

• Turn the projector upside down onto a soft surface.
• Gently slide projector lamp cover out of its slot.

• Using the screw driver to loosen the screw holding the InFocus SP-LAMP-024 projector lamp in place.
• Detach the lamp connector attaching the InFocus SP-LAMP-024 to the InFocus IN24EP projector by pressing the locking tab on the connector and gently pulling.
• Loosen the screw on the projector lamp to loosen the lamp.

• Grab the InFocus SP-LAMP-024 lamp handle and carefully lift the lamp cage up.Pulling too quickly can cause the bulb to shatter. Learn what to do should the bulb break.
• Install the new InFocus SP-LAMP-024 lamp housing and tighten the screw.
• Connect the connection wire from the lamp to the projector
• Slide the lamp door back in place, making sure it is aligned so it clicks into place.
• You are ready to reset the lamp hours.

NOTE: The InFocus SP-LAMP-024 projector lamp contains mercury and should not be thrown into regular garbage. Recycle your used lamps!

Reset the projector lamp timer

After replacing the InFocus SP-LAMP-024 projector lamp be sure to reset the lamp hours. Failure to do so will mean your InFocus IN24EP projector will NOT TURN ON.

• Open the MAIN menu. Press SELECT
• Scroll down to the SERVICE menu.
• Scroll down to RESET LAMP HOURS.
• Lamp hours will be reset to zero.

Tips for longer lamp life

• Keep your air filters clean to avoid overheating the projector.
• Turn off the InFocus IN24EP projector and let it stand for at least one hour ever 24 hours.
• Make sure there is enough airflow around the projector particularly if it’s been permanently mounted.
• Top tips for extending DLP projector lamp life

The post How to install a replacement Infocus IN24EP projector lamp appeared first on DLP Lamp Guide - LCD and DLP Repair Tips - Fix Your DLP - FixYourDLP.com.

Importance of authentic

Resist the temptation to buy a cheaper generic lamp as they can cause your InFocus N24 projector to not work properly. When you purchase an authentic projector lamp, you’re guaranteed a lamp that has been manufactured with high quality parts and calibrated to your projector. Generics don’t offer the same performance. Invest in an authentic Infocus IN24 projector lamp.

6 reasons to avoid generics

• shorter lamp life
• created with toxic materials and carcinogenic parts
• prone to explosions
• damage the sensitive electronics in your projectors
• hurt your eyesight since they have no safeguards
• installing a generic lamp voids your projector’s warranty.

Learn the 7 Ways to spot a counterfeit lamp.

Buy this lamp on Amazon sold by these authorized dealers:

• InFocus SP-LAMP-024 Projector lamp – for Learn Big IN24EP, Work Big IN24, IN26
• Replacement Lamp, IN24 & IN26/3000 Hours, SP-LAMP-024
• Lampedia SP-LAMP-024-001 Replacement Lamp for Infocus IN24/IN24EP/IN26/W240/W260

Replacement warning signs

When it’s time to replace the InFocus IN24 projector lamp you may seen the following signs:

• The projector image gets darker and starts to deteriorate.
• The projector lamp flashes red.
• The warning message REPLACE THE LAMP appears on screen.

Replace the InFocus SP-LAMP-024 immediately.

Installing the replacement projector lamp

Follow these important safety steps BEFORE installing the replacement

• Turn off the InFocus IN24 projector and unplug the power cord.
• To avoid getting burned, let the InFocus IN24 projector  fully cool before changing the lamp.
• Do not operate the projectors while any of the lamps are removed as this may result in malfunctions, fire hazard and other accidents.
• Caution: Don’t touch the screen or the actual bulb with your finger since the oil from your skin can cause a black spot on the bulb.

• Turn the projector upside down onto a soft surface.
• Gently slide projector lamp cover out of its slot.

• Using the screw driver to loosen the screw holding the InFocus SP-LAMP-024 in place.
• Detach the lamp connector attaching the InFocus SP-LAMP-024 to the InFocus N24 projector by pressing the locking tab on the connector and gently pulling.
• Loosen the screw on the projector lamp to loosen the lamp.

• Grab the InFocus SP-LAMP-024 lamp handle and carefully lift the lamp cage up.Pulling too quickly can cause the bulb to shatter. Learn what to do should the bulb break.
• Install the new InFocus SP-LAMP-024 lamp housing and tighten the screw.
• Connect the connection wire from the lamp to the projector
• Slide the lamp door back in place, making sure it is aligned so it clicks into place.
• You are ready to reset the lamp hours.

NOTE: The InFocus SP-LAMP-024 projector lamp contains mercury and should not be thrown into regular garbage. Recycle your used lamps!

Reset the projector lamp timer

After replacing the InFocus SP-LAMP-024 projector lamp be sure to reset the lamp hours. Failure to do so will mean your InFocus IN24 projector will NOT TURN ON.

• Open the MAIN menu. Press SELECT
• Scroll down to the SERVICE menu.
• Scroll down to RESET LAMP HOURS.
• Lamp hours will be reset to zero.

Tips for longer lamp life

• Keep your air filters clean to avoid overheating the projector.
• Turn off the InFocus IN24 projector and let it stand for at least one hour ever 24 hours.
• Make sure there is enough airflow around the projector particularly if it’s been permanently mounted.
• Top tips for extending DLP projector lamp life

The post How to change the Infocus IN24 projector lamp appeared first on DLP Lamp Guide - LCD and DLP Repair Tips - Fix Your DLP - FixYourDLP.com.