Look for the seal of approval and buy only OEM authentic lamps. Genuine Epson ELPLP15 lamps will keep your Epson projector working at its best. Protect yourself from tricked into purchasing counterfeit “generic-compatible” lamps.

6 reasons to buy authentic and avoid generics

• OEM lamps have a longer life than generics
• knock off lamps are created with toxic materials and pose a health threat
• authentic lamps are safer and less likely to explode
• copycat lamps can damage the sensitive electronics in your projectors
• generics don’t come with a guarantee or tech support. Getting a refund can be a hassle.
• your warranty on the Epson will be void if you install a generic lamp.

When to replace the Epson ELPLP15 lamp

When it’s approaching end of life there will be some very distinct signs that the Epson ELPLP15 needs a new lamp. Watch for the following telltale signs:

• Dark image
• Image that has deteriorated
• “Replace the Lamp” warning message appears on screen
• Lamp light flashes orange or red

Compatible projectors with the Epson ELPLP15 lamp

The Epson ELPLP15 lamp can be used with the following projectors:

Epson EMP-600 Epson EMP-600P Epson EMP-800 Epson EMP-800P Epson EMP-800UG Epson EMP-810 Epson EMP-810P Epson EMP-810UG Epson EMP-811 Epson EMP-811P Epson EMP-820 Epson EMP-820P Epson PowerLite 600P Epson Powerlite 800P Epson Powerlite 810P Epson PowerLite 811P Epson PowerLite 820P

For step-by-step instructions on replacing your Epson ELPLP15 lamp, click on your projector listed below:

Click here for step-by-step instructions on how to change the Epson ELPLP15 projector lamp for the Epson PowerLite 600P projector.

Click here for step-by-step instructions on how to change the Epson ELPLP15 projector lamp for the Epson Powerlite 800P projector.

Click here for step-by-step instructions on how to change the Epson ELPLP15 projector lamp for the Epson Powerlite 810P projector.

Click here for step-by-step instructions on how to change the Epson ELPLP15 projector lamp for the Epson EMP-811P projector.

Click here for step-by-step instructions on how to change the Epson ELPLP15 projector lamp for the Epson PowerLite 820P projector.

Extend the life of the newly installed Epson ELPLP15 with the following tips:

• Blocked air filters can cause your projector to overheat and shorten the lamp life.
• Turning off the Epson projector for at least one hour per day and limiting use to 5 hours of daily usage will prolong lamp life.
• Make sure there is enough airflow around the projector particularly if it’s been permanently mounted. The projector overheating can shorten the lamp life.
• Learn more with Top tips for extending DLP projector lamp life

Save

The post Which projectors are compatible with the Epson ELPLP15 lamp? appeared first on DLP Lamp Guide - LCD and DLP Repair Tips - Fix Your DLP - FixYourDLP.com.

Keep your Epson projector working at its best and prolong its life by installing an authentic Epson ELPLP15 lamp. Only projector lamps created by an authentic manufacturer. Look for the seal of approval and buy only OEM authentic  lamps. You’ll be getting a far superior product with a replacement guarantee and tech support. Scroll down for a list of projectors that are compatible with the Epson ELPLP15.

6 reasons to buy authentic and avoid generics

• OEM lamps have a longer life than generics
• knock off lamps are created with toxic materials and pose a health threat
• authentic lamps are safer and less likely to explode
• copycat lamps can damage the sensitive electronics in your projectors
• generics don’t come with a guarantee or tech support. Getting a refund can be a hassle.
• your warranty on the Epson will be void if you install a generic lamp.

Protect yourself from tricked into purchasing counterfeit “generic-compatible” lamps.

When to replace the Epson ELPLP15 lamp

When it’s approaching end of life there will be some very distinct signs that the Epson ELPLP15 needs a new lamp. Watch for the following telltale signs:

• Dark image
• Image that has deteriorated
• “Replace the Lamp” warning message appears on screen
• Lamp light flashes orange or red

Compatible projectors with the Epson ELPLP15 lamp

The Epson ELPLP15 lamp can be used with the following projectors:

Epson EMP-600 Epson EMP-600P Epson EMP-800 Epson EMP-800P Epson EMP-800UG Epson EMP-810 Epson EMP-810P Epson EMP-810UG Epson EMP-811 Epson EMP-811P Epson EMP-820 Epson EMP-820P Epson PowerLite 600P Epson Powerlite 800P Epson Powerlite 810P Epson PowerLite 811P Epson PowerLite 820P

For step-by-step instructions on replacing your Epson ELPLP15 lamp, click on your projector listed below:

Click here for step-by-step instructions on how to change the Epson ELPLP15 projector lamp for the Epson EMP-810P projector.

Click here for step-by-step instructions on how to change the Epson ELPLP15 projector lamp for the Epson EMP-810UG projector.

Click here for step-by-step instructions on how to change the Epson ELPLP15 projector lamp for the Epson EMP-811 projector.

Click here for step-by-step instructions on how to change the Epson ELPLP15 projector lamp for the Epson EMP-811P projector.

Click here for step-by-step instructions on how to change the Epson ELPLP15 projector lamp for the Epson EMP-820 projector.

Click here for step-by-step instructions on how to change the Epson ELPLP15 projector lamp for the Epson EMP-820P projector.

Extend the life of the newly installed Epson ELPLP15 with the following tips:

• Blocked air filters can cause your projector to overheat and shorten the lamp life.
• Turning off the Epson projector for at least one hour per day and limiting use to 5 hours of daily usage will prolong lamp life.
• Make sure there is enough airflow around the projector particularly if it’s been permanently mounted. The projector overheating can shorten the lamp life.
• Learn more with Top tips for extending DLP projector lamp life.

Save

The post Matching projectors with the Epson ELPLP15 lamp appeared first on DLP Lamp Guide - LCD and DLP Repair Tips - Fix Your DLP - FixYourDLP.com.

Follow this quick-step guide to an easy installation of an Epson PowerLite 820P projector lamp.

Know when to replace

There are approximately 1500 hours in the typical Epson PowerLite 820P projector lamp before it reaches end of life. There will be some very obvious warning signs when the lamp needs to replaced in the  Epson Powerlite 820P projector. Watch for the telltale warnings signs.

Warning signs

• Image begins to dim or actually deteriorate. Colours appear distorted.
• “Replace the Lamp” warning message appears on screen
• Lamp light lights red or starts flashing red

• Check the amount of lamp life left from the About menu found on the Main Menu.

Authentic vs. generic

Look for the seal of approval when you are buying your lamp and avoid generic lamps. While generic have a lower pricetag, there are plenty of downsides to these lamps:

• prone to explosions because of their inferior workmanship
• don’t last the full 1400 hours
• health hazard due to the toxic materials used
• not calibrated properly and will damage the optics
• copycat manufacturers offer no guarantee or refunds
• the warranty on your Epson Powerlite 820P projector will become void.

Protect your health, the health of your Epson Powerlite 820P projector and buy authentic. Don’t be fooled by the generic manufacturers: Learn the 7 Ways to Spot a Counterfeit Lamp.

Installing the Epson ELPLP15 lamp

Before oinstalling the new Epson ELPLP15 lamp, do these following steps:

• Turn off the projector and wait until the power lights stops flashing.
• Unplug the power cord so the projector can’t be accidentally turned of while the lamp is being replaced.
• Wait for at least one hour for the Epson PowerLite 820P to cool down. It should be cool to the touch. This is crucial. These projectors operate under high heat and you can get burned very badly if the projector is still hot.

Take the screwdriver that came with the Epson PowerLite 820P and use it to pop open the lamp cover. Put the lamp cover to one side.

Once the lid is removed, use the same screwdriver to loosen the screws holding the Epson ELPLP15 in place. NOTE: The screws will not come all the way out.

Grab the top ridges along the Epson ELPLP15 lamp and gently pull up. Using too much force can break the bulb. Learn how to clean up after a bulb breaks.

Put the old lamp aside for proper recycling. These lamps can’t be thrown into the garbage as they contain mercury. Contact your OEM manufacturer for recycling instructions.

Hold the lamp so it faces the correct way and insert the Epson ELPLP15 lamp until it clicks into place. Tighten the screws. Line up the hinges on the cover and snap back into place.

You are now ready to reset the lamp timer.

Resetting the Epson PowerLite 811P lamp timer

After replacing the Epson ELPLP15 lamp you’ll need to reset the lamp timer in order for the Epson PowerLite 820P to properly track the lamp life. Only reset the Epson PowerLite 820P lamp timer when a new Epson ELPLP15 lamp has been installed or you run the risk of the lamp being used beyond its recommended lamp life and damaging your projector.

To reset the lamp:

• Press the MENU button on either projector’s control panel or on the remote control to display the MAIN MENU.
• Scroll down to the ABOUT menu. Press the ENTER.
• Scroll down to the Reset Lamp Timer option.
• The reset dialogue box will appear asking you to Execute? Press Yes.
• The lamp hours will be reset to zero.
• No lamp hours will appear until you have used the Epson ELPLP15 for at least 10 hours.

Tips for longer lamp life:

Extend the life of the newly installed Epson ELPLP15 with the following tips:

• Keep your air filters clean to avoid overheating the projector.
• Turn off the Epson PowerLite 820P projector and let it stand for at least one hour ever 24 hours. An average use of four to five hours per day will ensure longer lamp life.
• Make sure there is enough airflow around the projector particularly if it’s been permanently mounted.
• Learn more with Top tips for extending DLP projector lamp life.

Save

The post D.I.Y. guide for replacing the Epson PowerLite 820P projector lamp appeared first on DLP Lamp Guide - LCD and DLP Repair Tips - Fix Your DLP - FixYourDLP.com.